• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.1-5
• /
• 2011

The brand-new small output radio equipment which is over than 800MHz has an all-in-one interior antenna. We suggested new measuring method and developed related equipment because all-in-one radio equipment's performance evaluation requests old way, which is measuring transmitter output and antenna capacity separately, to be changed. That is, origin of small radio equipments with the 360 degree field measured by measuring the TRP, and also 360 degree opposite reception level measured at the radio equipment by measuring the TIS to make a quantitative evaluation was to be. Furthermore, we made managing frequencies, all-in-one radio equipment's best design and capacity management efficiently by measuring the gain of an antenna mounted on a PCB, the circuit around the genetic material, conductive material on the effects of radiation or the reception level.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.447-457
• /
• 2008

Laboratory tests for single plane sliding were conducted using the model rock slope to investigate the cut slope deformability and failure mechanism due to combined effect of engineering characteristics such as angle of sliding plane, water force, joint roughness and infillings. Also the possibility of prediction of slope failure through displacement monitoring was explored. The joint roughness was prepared in forms of saw-tooth type having different roughness specifications. The infillings was maintained between upper and lower roughness plane from zero to 1.2 times of the amplitude of the surface projections. Water force was expressed as the percent filling of tension crack from dry (0%) to full (100%), and constantly increased from 0% at the rate of 0.5%/min and 1%/min upto failure. Total of 50 tests were performed at sliding angles of $30^{\circ}$ and $35^{\circ}$ based on different combinations of joint roughness, infilling thickness and water force increment conditions. For smooth sliding plane, it was found that the linear type of deformability exhibited irrespective of the infilling thickness and water force conditions. For sliding planes having roughness, stepping or exponential types of deformability were predominant under condition that the infilling thickness is lower or higher than asperity height, respectively. These arise from the fact that, once the infilling thickness exceeds asperities, strength and deformability of the sliding plane is controlled by the engineering characteristics of the infilling materials. The results obtained in this study clearly show that the water force at failure was found to increase with increasing joint roughness, and to decrease with increasing filling thickness. It seems possible to estimate failure time using the inverse velocity method for sliding plane having exponential type of deformability. However, it is necessary to estimate failure time by trial and error basis to predict failure of the slope accurately.

• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.118-127
• /
• 2004

The purpose of this study is experimentally to analyze that intake port swirl, injection system and turbocharger have an effect on the engine performance and the emission characteristics in a V8 type turbocharged intercooler D.I. diesel engine of the displacement 16.7ι, and to suggest the improvement of engine performance. Generally to enhance engine power, TCI diesel engine is put to practically use turbo-charged intercoler in order to increase boost efficiency which is cooled boost air. As results of considering the factors of the intake port of swirl ratio 2.25, compression ratio 17.5, re-entrant 8.5$^{\circ}$ combustion bowl, nozzle hole diameter ${\Phi}$0.33*3+${\Phi}$0.35*2, nozzle protrusion 3.18mm, injection timing BTDC 12$^{\circ}$CA and turbo charger (compressor 0.6A/R+46Trim, turbine 1.0A/R+57Trim) is the best in the full range of operating in the engine performance and the exhaust characteristics of NO$\_$x/ concentration. Therefore their factors are appropriated as intake system, injection and turbocharger system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.395-402
• /
• 2010

Baffle injectors are protruded into the combustion chamber and form an anti-pulsating baffle to prevent high-frequency combustion instabilities in transverse modes. Being exposed to a high heat-flux environment, the baffle injector has self-cooling passages through which kerosene is convected and heated. The baffle injector with 20 spiral cooling channels has been developed and successfully applied to 30 $ton_f$-class combustors without any performance loss due to an additional cooling. In this work, numerical analysis of conjugate heat transfer in baffle injectors with various cooling channel designs has been performed in order to reduce the fabrication cost which would be considerably increased for the 75 $ton_f$-class combustor. Prior to the application to a full-scale combustor, the thermal durability of the modified design has been verified through the subscale hot-firing tests.

• Korean Journal of Plant Taxonomy
• /
• v.47 no.4
• /
• pp.308-315
• /
• 2017

A new species, Corydalis bonghwaensis M. Kim & H. Jo, is described here. It is found on a mountain slope in Bongwha-gun, Gyeongsangbuk-do, Korea. Corydalis bonghwaensis shares several characteristics (white flowers, glabrous pedicels, white tubers, and the polygonal stigma) with related species C. namdoensis B. U. Oh & J. G. Kim and C. albipetala B. U. Oh. However, this new species has flowers which change from pale-yellow to white, a mucronated inner-petal apex, linear leaflets, and fusiform capsules with two-rowed seeds. In contrast, C. namdoensis has retuse inner-petal apex, various leaflets, and fusiform capsules with 2-rowed seeds. C. albipetala has retuse inner-petal apex, elliptical leaflets, and linear capsule with 1-rowed seeds. Also C. humilis B. U. Oh & Y. S. Kim has pale-blue purple flowers, elliptical leaflets, inflorescence with 1-5 flowers, and hemispherical lower-outer petal.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.252-257
• /
• 2019

We investigated the microstructure and morphological characteristics of microplastics added to rinse off cosmetics by scanning electron microscope. The size of the microplastic was in a wide range of sizes, from $250{\mu}m$ to 1.5mm in diameter. The small microplastics were in the shape of elongated particles and the large microplastics were cuboidal. Most cubic microplastics were observed in the form of squares or rectangles. The surface of the cubic microplastic was smoothly observed without protruding portions, but irregularly many gaps were formed. The gap between openings was measured from about $5{\mu}m$ to $20{\mu}m$. It has not been confirmed that these gaps are formed from the surface of the microplastic to the inside there of.

• Journal of Yeungnam Medical Science
• /
• v.10 no.1
• /
• pp.82-90
• /
• 1993

Satisfactory results were obtained in 90% of all cases after aesthetic facial bone contouring was performed. In these cases. no visible scar on the face resulted by using the bicoronal and intraoral approaches. We experienced eight cases of postoperative complications. Patient selection and preperative planning is very important in achieving superior cosmetic results in facial bone contouring.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.1
• /
• pp.108-114
• /
• 1995

Cylindrical chamber mufflers with an extended inlet or outlet are extensively used in many application fields to reduce the propagated noise in ducts. The basic attenuation effectivencess in the low frequency region can be explained by the reactive wave action inside the expansion chamber associated with the geometric configurations of the inlet and outlet locations, and the area expansion of the jacket. In this study, an acoustic analysis is carried out for a concentric extended pipe inserted into a simple expansion chamber. An algebraic equation is derived by using the eigenfuction expansion and orthogonality principle in which the acoustic pressures and particle velocities defined on each subdivided surface are expressed by the separable coordinates. By using the proposed analytical method, transmission losses are predicted for several configurations of the concentric extended systems and they agree very well with experimental results.

• The Korean Journal of Ecology
• /
• v.17 no.1
• /
• pp.59-67
• /
• 1994

Differences in physicochemical characteristics of sediment and changes in density, height and dry matter of shoots along different water depths were investigated in the stands of Zizania latifolza populations of the littoral zone of Lake Paltangho, Korea. Any significant differences in sediment chemistry were not found along water depth, although sand content decreased slightly with increasing depth. Shoot density of Zizania latqolia decreased with increasing water depth. In shallower water, many of the short shoots died in the early growth stages. The morphology of shoots was taller and heavier in deeper water. The distributions of shoot heights became negatively skewed and leptokurtic as plants grew, and these changes occurred in the earlier growth stages in deeper water. The standing crop of shoots increased with increasing water depth. These results suggest that Zizania lattfolia has a growth strategy for adjustment to deep water through decreasing shoot density and increasing height.

• Journal of Aquaculture
• /
• v.8 no.3
• /
• pp.231-240
• /
• 1995

This study was conducted to examine early gonadogenesis by using a histological method for the appearance of primordial germ cells (PGCs), protrude of genital ridge, and formation of primitive gonads in diploid and triploid mud loach, Misgurnus mizolepis. The pattern of early gonadogenesis including appearance of PGCs, formation of genital ridge, and development of primitive gonad in both diploid and triploid were not different histologically. Characteristics of PGCs of triploid were also the same as those of diploid. However, gonadal length of diploid was significantly longer than that of triploid (P<0.05).