Proceedings of the Korea Water Resources Association Conference
/
2018.05a
/
pp.235-235
/
2018
홍수 시의 산지하천 만곡부는 2차류 발생과 편수위 상승에 따른 하상세굴 및 홍수범람 위험이 크다. 만곡부 외측에 주로 설치되어 있는 콘크리트 옹벽호안은 표면이 매끄러워 홍수피해를 가중 시킨다. 이러한 피해를 저감시키기 위해 콘크리트 옹벽에 돌출줄눈을 설치하여 유속조감 및 설치효과를 분석한 바 있다. 본 연구에서는 기존에 제안된 직사각형 단면의 돌출줄눈보다 내구성을 추구한 사다리꼴 단면의 돌출줄눈을 제시하여 수리모형 실험을 수행하였다. 수리모형 실험은 개수로 직선수로에서 수로경사 0.0035 조건에서 수로 출구 게이트를 조절하면서 이루어졌다. 모형 돌출줄눈의 조도높이는 3cm로 하였으며, 사다리꼴 밑각은 $45^{\circ}$로 완만한 경우이다. 설치간격은 무차원 돌출줄눈 간격을 기준으로 ?형 조도인 6으로 하였다. 돌출줄눈의 설치 유무에 따라 유량에 따른 수위를 측정하고 유속을 산정하여, 마찰저항의 변화를 파악하였다. 공급유량에 따른 Froude 수는 0.168~0.359 범위였으며, 유량이 증가에 따라 Manning의 조도계수는 감소하였다. Froude 수가 0.25보다 큰 경우 돌출줄눈설치의 조도계수가 미설치보다 큰 것으로 파악되었다. 그러나 사다리꼴 돌출줄눈의 흐름저항효과는 직사각형 돌출줄눈에 비해 상대적으로 작았다. 수로 횡단면의 수위분포에 따르면, 돌출줄눈 설치 측벽 주변에서 흐름저항에 따른 유속감소와 수위상승 효과가 나타나는 것으로 파악되었다. 이번 사다리꼴 돌출줄눈은 흐름저항 효과가 크지 않았기 때문에 사다리꼴 밑각을 조정하여 새로운 단면에 대한 추가적인 실험이 필요할 것으로 보인다.
This study is to compare the accuracy of evaluation regarding the volume of the prostate, which three-dimensional volume rendering was produced the shape of protrusion, by measuring two kinds of craniocaudal length from the top of the protrusion and from the exclusion of the protrusion as the starting points. For the imaginary protrusion prostate models, total of 10 models were roughly made by using devils-tongue jelly and changing each of the 10 ml of capacity from 10 ml to 100 ml. For the protrusion prostate models aimed at estimating the real volume, through 64 cannel computed tomography (CT) and 3.0 tesla magnetic resonance image (MRI) were conducted by planimetry technique from three-dimensional volume rendering. And then we performed to evaluate on significance of these volumes by wilcoxon signed rank test. Also the obtained volumes data by ellipsoid volume formula were measured the volume of protrusion prostate models two times with each method using the two kinds of craniocaudal length from top of the protrusion and from exclusion of the protrusion as the starting points. Finally, the significance of differences using wilcoxon signed rank test was evaluated between the real volume by planimetry technique and the measured volume by ellipsoid volume formula from three-dimensional volume rendering. The average of the protrusion length on the models was $0.90{\pm}0.18\;mm$ in CT and was $0.75{\pm}0.11\;mm$ in MRI. There were not statistically significant difference between MRI and CT from the volume of protrusion prostate models (p=0.414). In MRI (p=0.139) and CT (p=0.057), there were not statistically significant difference between the real volume by planimetry technique and the measured volume by ellipsoid volume from exclusion of the protrusion as the starting points. While, there were statistically significant difference between the real volume by planimetry technique and the measured volume by ellipsoid volume from top of the protrusion as the starting points in MRI (p=0.005) and CT (p=0.005). For the accurate measurement of the protrusion prostate models, the craniocaudal length of the prostate should be measured from the exclusion of the protrusion as the starting points.
In this study, we focused on the low practicality of traditional outdoor advertisements due to uniformity of materials, shapes, and designs, so in order to improve it, we will analyze impact on the practicality of outdoor advertisements depends on the attached type of advertising signboards. The research method is to set up a research model and hypotheses through a literature review and conduct a survey and then perform factor analysis and hierarchical regression analysis. Hypothesis1. The evaluation factors (readability, formability or symbolism) of outdoor advertising signboard in traditional markets will affect their practicality. Hypothesis 2. The type of attached advertising signboards (protruding type or wall-type) in traditional markets will control the impact of each evaluation factors' on practicality. In a result, readability and formability will affect practicality. To increase practicality, the size, color, font, layout and etc. of outdoor advertising signboards should be well recognized to get the better understanding. Also, practicality will be increased by the harmonization and the sense of balance.
Proceedings of the Korean Society of Computer Information Conference
/
2019.07a
/
pp.393-394
/
2019
본 연구는 현재 임신 중인 임산부 중 6개월 이상의 임산부를 대상으로 스스로가 본인의 체형을 어떻게 인식하고 있는가 하는 주관적 평가를 유형화하고 유형별 특성을 고찰하고자 하였다. 이를 통해 임산부의 체형에 적합한 의복디자인 및 패턴설계에 필요한 기초자료를 제공하고자 하였다. 본 연구는 Q방법론을 사용하였으며, Q분석은 쿼넬 프로그램(QuANL pc program)을 사용하였다. 임산부의 체형에 대한 인식 유형은 가는 팔다리 중앙 반구형 복부 체형, 처진 복부 돌출 체형, 굵은 윗팔 중앙 돌출 복부 체형의 3가지 유형으로 분석되었다. 가는 팔다리 중앙반구형 복부 체형은 임신 전 BMI지수가 가장 낮아 정상에 속하였으며 팔다리는 가늘고 다른 부위는 거의 살이 찌지 않았으며 배만 나왔다고 인식하였다. 처진 복부 돌출 체형은 임신 전 BMI 지수가 가장 높아 과체중에 속한 유형으로 가슴둘레, 엉덩이둘레뿐만 아니라 몸에 전체적으로 살이 쪘으며, 배가 아래로 처진 체형으로 인식되었다. 굵은 윗팔 중앙 돌출 복부 체형은 제1유형과 같이 복부의 중앙부분이 돌출되어 있다고 인식하였으나 윗팔둘레가 굵어졌다고 인식하여 제1유형과는 차이를 나타냈다. 임신 전 BMI 지수는 중간인 그룹으로 정상에 속하였다. 향후 연구에서는 임산부의 실제 체형 분석을 통하여 본 연구의 인식체형과의 차이를 비교 분석해보는 것도 의미 있는 연구가 될 것으로 생각된다.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2013.05a
/
pp.140-140
/
2013
3차원 실장을 위한 TSV의 제조 공정 중에 발생할 수 있는 Cu의 돌출 거동에 대해 연구하였다. Cu의 돌출은 반도체를 제조할 때 고온(>$350^{\circ}C$) 공정인 BEOL (back end of line) 중에 발생하는 현상이다. Cu의 돌출은 Si과 Cu의 열팽창계수 차이에 의해 발생하는 현상으로 고온 공정 뿐만아니라 열충격 시험과 같은 열피로에 의해서 발생할 수 있다. 따라서 본 연구에서는 $-65^{\circ}C$에서 15분과 $150^{\circ}C$에서 15분을 1 사이클로 설정하여 0, 250, 500, 1000 사이클의 열충격 시험을 수행하였다. 열충격 시험 후 각 사이클에서의 Cu 돌출 거동과 Cu의 표면 거칠기 변화에 대해 연구하였다.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.37
no.6
/
pp.562-570
/
2009
An Experimental study was conducted on the flow characteristics and interference heating caused by a two-dimensional object protruding from a flat plate using a blow-down type of hypersonic wind tunnel. Inflow condition was a free-stream Mach number of 7.0 and a unit Reynolds number of $2.0{\times}10^6/m$. Experimental conditions were varied with three heights of protuberance for two flat plate models which have different lengths. Experimental data were obtained from Schlieren visualization images and heat flux measurements. Also, this paper suggests hypersonic experimental techniques such as boundary-layer detection method in detail. A Large separation region was observed in front of the protuberance and that region was very sensitive to the height of protuberance and the length of the flat plate. For only the highest protuberance, a severe jump of heat flux was observed at the top station among the measuring points. Measured heat flux is large when the height of protuberance is large and the length of flat plate is long.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2017.04a
/
pp.83-83
/
2017
국내에 유통되는 제초날은 대부분 금속으로 제작되며, 금속 날의 대부분 탄소공구강(SK-3~5)으로 제작되고, 날 수 및 날 형태에 따라 2도 날, 3도 날, 4도 날, 8도 날, 톱날로 구분된다. 대부분 평지 제초작업에 사용되고, 고랑 제초 작업에 알맞은 제초날의 없어 고랑 제초 작업의 효율이 떨어진다. 본 연구는 굴곡이 있는 밭의 고랑 제초 작업에 효율적인 원형 제초날을 설계 하고자 한다. 밭작물의 제초작업은 굴곡이 있는 이랑과 고랑 사이의 잡초를 제거해야 하기 때문에 평지의 잡초를 제거하는 제초날로는 제초작업이 거의 불가능하다. 따라서 고랑 형상에 맞는 원형 제초날을 설계 하였으며, 회전 균형 및 무게의 균일성 설계가 쉬운 뼈대형 원형 제초날을 설계한 후 데이터를 이용하여 원형 제초날을 설계하였다. 또한 고랑의 잡초 뿌리부분을 제거하기 위해 원형 제초날에 돌출부를 추가하는 방법으로 설계하였다. 제초날은 밭작물 고랑폭을 기준으로 하여 높이는 85mm 직경은 300mm로 설계하였으며, 제초날 설계시 원형 제초날은 뼈대형 원형 제초날과 같이 고랑폭을 기준으로 하여 높이 및 직경을 뼈대형 원형 제초날과 동일한 치수로 설계하였다. 원형 제초날 설계에서 돌출부를 볼트 결착방식으로 설계하였으며, 회전중 돌출부의 파손 혹은 이탈을 방지하기 위하여 직경 5mm이상의 볼트 결착이 필요하였다. 볼트 결착방식은 제초날 조립후 제초날 회전시 고랑의 잡초를 효과적으로 제거하기 위한 작업공간 확보가 어려울 것으로 판단되었다. 따라서 제초날 원형부에 돌출부를 절단 절곡하는 방식으로 돌출부를 재설계하였으며, 돌출부 길이는 안쪽 부분 15mm, 바깥 부분 20mm로 설계하고, 돌출부 회전반경은 안쪽 날 20mm, 바깥 날 10mm로 설계하였다. 일반적인 제초날 과 달리 원형 제초날을 개발하기 위해서 회전균형과 안전이 제초날 설계에 중요한 요인이 된다. 뼈대형 제초날을 통하여 제초날의 균형 데이터를 분석하였고 이를 바탕으로 원형 제초날을 설계하였다. 또한 발란싱 머신을 이용한 회전시험에서 unbalance 정도가 3,600rpm에서 4.51/47.1deg로 나타나 제초기에 적용 가능할 것으로 판단되었다.
Journal of the Korea institute for structural maintenance and inspection
/
v.18
no.3
/
pp.1-9
/
2014
Improving the earthquake resistance of buildings through seismic retrofitting using steel braces can result in brittle failure at the connection between the brace and the building, as well as buckling failure of the braces. In this study, a non-compression cross-bracing system using the Carbon Fiber Composite Cable (CFCC), which consists of CFCC bracing and bolt connection was proposed to replace the conventional steel bracing. This paper presented the seismic resistance of a reinforced concrete frame strengthened using CFCC X-bracing. Cyclic loading tests were carried out, and the maximum load carrying capacity and ductility were investigated, together with hysteresis of the lateral load-drift relations. Test results revealed that the CFCC X-bracing system installed RC frames enhanced markedly the strength capacity and no buckling failure of the bracing was observed.
Kim, Hyun-Hwan;Jeon, Hee;Lee, Si-Young;Kwon, Young-Sam
Proceedings of the Korean Society for Bio-Environment Control Conference
/
1998.05a
/
pp.174-177
/
1998
단동형 비닐하우스의 규격은 대부분 폭 5-6m, 하우스높이 2.4m정도로 아연도금파이프 ø22mm, ø25mm를 이용하여 아치형이나, 돌출형(복숭아형) 형태로 서까래간격 60cm에서 120cm까지 시공되어 있으며 남부지역에서는 서까래 간격이 넓게 시공되는 것이 일반적이다. 최근에는 하우스 환기를 위해 측면 권취 뿐만 아니라 하우스의 천장에 상품화된 연통형(굴뚝형) 환기구를 단동형 비닐하우스에 많이 이용되고 있으며 시설내환경을 조절하고 있다. (중략)
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.