• Journal of the Korean Society for Marine Environment & Energy
• /
• v.14 no.4
• /
• pp.264-272
• /
• 2011

Shipbuilders carry out the operation test to check the conditions of the main propulsion system and auxiliaries for moored vessel in the quoy before the sea trial. The estimation of the thrust and torque for the partially submerged propeller should be prepared to ensure the safety of mooring line and the ship. In this paper, the variations of the thrust and torque according to the shaft submergence and the propeller rotating speed in bollard pull condition are investigated with the model test and the numerical analysis. Based on these resaearch, the empirical formula representing the physical phenomena of the partially submerged propeller is derived and validated through comparison to measurement results of full-scale propellers under the quoy operation test.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.1
• /
• pp.107-123
• /
• 2003

The objective of this study was to investigate mineral precipitates, which derived from the zero valent iron (ZVI) corrosion during TCE dechlorination and to find the controlling factors in mineral precipitates. A series of column experiemnts were conducted to evaluate the location of ZVI and the effects of electrode arrangements in electro-enhanced permeable reactive barrier (E2PRB) systems. Based on mineralogical study, ZVI samples near the influent port had more lepidocrocite, ferrihydrite or Fe (oxy)hydroxide, and (phospho)siderite while backward samples had more akaganeite, magnetite/maghemite, and intermediate green rust (GR) I and GR II. A suite of mineral distribution was preferabley related to the dissolved oxygen and the increased pH. Controlling factors of mineral precipitates in an E2PRB system were found to be (1) pH, (2) dissolved oxygen, (3) the types of Fe intermediates, and (4) anionic species to form complex strongly.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.463-468
• /
• 2004

A lab-scale fundamental study to develop the solvent extraction process of ship wash wastewater containing TBT was carried out. For various solvents, including diesels for car and ship, bunker B, thinner, toluene, and ether, the extraction efficiencies of TBT from synthetic ship wash wastewater were compared The effect of extraction conditions, such as solvent amount, time and intensity of agitation, and pH, on the extraction efficiency of TBT was evaluated Diesel for ship showed better extraction efficiency of TBT than those of other tested solvents, and the proper amount of the extraction solvent for 1L of the wastewater was l0mL. When the agitation intensity was increased from 50rpm to 250rpm, the TBT remained in the wastewater after the extraction was decreased from around 120ppb to 2.8ppb. The remaining TBT in the wastewater was sharply decreased from 1hr of the extraction time, but was slightly increased again after 5hrs of the extraction time. The efficiency of TBT extraction was good in the weak acid range of pH, but was not significant as much as the others.

• Economic and Environmental Geology
• /
• v.15 no.4
• /
• pp.205-219
• /
• 1982

The Eosangcheon manganese ore deposits occur as supergene weathering deposits along quartz porphyry dikes developed in the Ordovician Heungweolri dolomite and Samtaesan limestone formations. The manganese ores are composed of manganese oxide minerals and associated other minerals. Rancieite and todorokite are abundantly found, and birnessite, nsutite, pyrolusite and chalcophanite are found in minor quantities. Associated other minerals are calcite, gypsum, goethite, lepidocrosite, quartz, and sericite. Microscopic, chemical, X-ray powder diffraction, infrared absorption spectroscopic and differential thermal analyses have been made for manganese oxide minerals and associated other minerals. The relationship of birnessite and rancieite was studied by means of X-ray powder diffraction and infrared absorption spectroscopic analyses. It is assumed that these minerals are closely related to each other in crystal structure, but separate species. The manganese oxide minerals were formed mainly by replacement, precipitation from solution, and recrystallization in the supergene weathering environment. The trend of formation of manganese oxide minerals is: (Rhodochrosite)-(todorokite)-(birnessite, rancieite)-(nsutite, pyrolusite, chalcophanite).

• Journal of the Korea Society for Simulation
• /
• v.15 no.4
• /
• pp.143-151
• /
• 2006

This paper deals with the simulation model for design and operations of A-Mart logistic center for low temperature products. In developed simulation model, receiving docks, digital classification system (DCS), shipping docks, material handling devices and manual sorting stations are considered. Five types of cargo such as fruits, palletized fruits, delicatessen and fisheries, vegetables and refrigerated cargoes are considered. The simulation model and process animation are developed using the simulation package ARENA. Among various design and operation alternatives consisting of the number of workers of receiving dock, allocation of receiving docks by cargo types, DCS capacity, the number of folk-lift, the number of manual sorting operators and overall layout, the best alternatives of each subsystem are selected by simulation analysis. The major performance measures such as DCS throughput, utilization of operators at each station, receiving docks utilization and folk-lift utilization are considered for the alternative evaluation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.8
• /
• pp.419-428
• /
• 2017

In this study, energy loss due to ventilation load in the dock system was analyzed through simulation. Also, flow generated in the dock system of the warehouse was measured using manufactured measuring devices. Numerical simulation was conducted by simulating the most common picking tasks by examining the actual working environment. Incompressible and unsteady turbulent flows were assumed, and the turbulence model was the k-e standard model. Proper grid was selected through grid dependency test. Measurement was conducted using Honeywell and Vaisala sensors, and flow and temperature inside the warehouse were measured and compared with simulation results to validate simulation. When comparing amount of loss occurring in two hours and amount of loss occurring in 15 minutes, docking time of the former was eight times longer but energy loss was 3.8 times lower. Ventilation load occurring during the initial period after opening docking system accounted for a large proportion of total ventilation load. Also, comparing the load when the dock was closed and the load when the truck was parked, ventilation load was significantly higher than load due to heat conduction from the wall. Therefore, in improving the docking system, it is effective to reduce the gap by improving compatibility of the docking system and truck, rather than wall material.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.1
• /
• pp.60-66
• /
• 2021

The importance of maintenance is leading the application of the maintenance strategy in various industries. The maritime industry is also a part of them, with changes in selecting and applying the maintenance strategy, but rather slowly, by retaining the old strategy. In particular, the ship is maintaining a previously used strategy. In the circumstance of the sea, ship requires a new suggestion for maintenance strategy. A ship predictive maintenance model predicts the breakdown or malfunction of machineries to secure maintenance time with preventive actions and treatments, thereby avoiding maintenance-related dangerous factors. This study focused on applying text analysis to an Liquefied Natural Gas Carriers dock indent document, and the analysis results were interpreted from the original document. The inter-relational patterns observed from the frequency of common maintenance combinations among different parts and equipment in ships will be applied to the development of ship predictive maintenance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.81-87
• /
• 2004

It includes the considerable concentration and dangerousness as the peculiar work of a pilot and dock-master to berthing/deberthing the big object as for the ship within the port or the ship yard. A tug utilization is getting increased in this berthing/deberthing work and the own ship is affected a lot by external force due to moving with low advance speed. In this study, we constructed the 2 dimension virtual system which can conduct the berthing/deberthing manoeuvring work by using mainly tugs in a external force, particularly strong wind. Also, propose objective standard that could estimate the degree of manoeuvring difficulty, and conducted simulation experiment for this. we analyzed correlations between the subjective estimation which is described numerically the decreased dangerousness and the objective index which is related to the main parameter regarding manoeuvring by using this simulator from the result of conducting simulation experiment. And then we discussed the estimation technique of manoeuvring difficulty.

• Journal of Navigation and Port Research
• /
• v.29 no.3 s.99
• /
• pp.189-194
• /
• 2005

The berthing/deberthing manoeuvring operation is the peculiar work owned to the marine pilot and the dock master. So, in the port or the shipyard, the berthing/deberthing manoeuvring operation requires considerable concentration and bears dangerousness. In that situation, a tug utilization is getting increased and the external forces have an effect on the own ship because of moving with low advance speed. In this study, we constructed the 2-dimensional virtual ship manoeuvring simulator system with which we can carry out the berthing/deberthing manoeuvring operation by using tugs in the external forces such as strong wind. And then, we propose the objective indexes by which the degree of manoeuvring difficulty evaluated. Using the present system, we carry out manoeuvring simulation experiment in order to grasp correlation between the objective indexes proposed here and the def{ree of manoeuvring difficulty felt by operator. Lastly, we discuss the evaluation technique of manoeuvring difficulty.

• 전기의세계
• /
• v.41 no.12
• /
• pp.21-30
• /
• 1992

내연기관의 가솔린자동차보다 역사가 오래된 전기자동차는 상대적으로 주생성능과 가격 경쟁력의 열세로 그 자취를 감추었고 최근까지 주로 특수목적의 단거리 저속차량으로 사용되고 있다. 그러나 1890년대 후반부터 전세계가 자동차배기가스에 의한 대기오염과 지구온난화 현상등의 문제를 심각하게 공감하게 되었고 마침내 미국 캘리포니아주에서는 전가자동차의 강제판매를 규정화하게 이르렀다. 이 규정에 의하면 1998년도부터 차량 판매대수의 2%를 전기자동차 판매로 강제요구하고 있다. 이 비율은 2000녀도에 5% 2003년에는 10%로 늘어날 계획이다. 따라서 미국에 많은 자동차를 수출하고 있는 일본, 독일 및 여러 유럽국가에서는 이 사업에 막대한 자금을 투자하며 개발에 몰두하고 있다. 미국의 Big3도 에너지성의 도움으로 최근 USABC를 결성하여 전기자동차 개발에 박차를 가하고 있다. 지금까지 기존의 가솔린자동차 기술에 있어서 일본과 독일에 상대적 열세에 있었던 미국도 이번 캘리포니아주의 전기자동차 강제판매 규정에 따른 전기자동차 사업으로 미국자동차 시장의 새로운 판도를 조성하겠다는 의도인듯하다. 국내에서도 정부가 이 사업의 중요성을 심각히 인식하고 G7사업과제의 하나로 선정하여 산, 학, 연 각층의 전문가가 참여하여 성공적으로 개발을 마칠 수 있도록 적극 지원하고 있다. 지금까지의 평균주행성능을 보면 최고속도 100-120km/h, 일층전 최대주행거리 150-200km 정도이며, 아직 양산체제에 돌입하지 않았기 때문에 가격면에서 경쟁력이 없는 실정이다. 그러나 1990년도에 들면서 각종 요소부품들의 기술수준이 급성장을 이루어서 앞으로 10년정도 후면 성능과 가격면에서 가솔린자동차와 대등한 수준의 전기자동차 개발이 실현될 수 있으리라 예측된다.는 영향받지 않았다. Clonidine의 심박수 감소작용은 .뇌실내및 정맥내 diltiazem이나 nifedipine 처리후에 감약되었다. 5). 뇌실내 clonidine$(30{\mu}g)$ 처 리후 뇌실내 diltiazem$(400{\mu}g)$과 nifedipine$(350{\mu}g)$의 혈압하강및 심박수 감소효과는 영향 받지 않고 그대로 나타났다. 이상의 결과로 diltiazem과 nifedipine은 가토뇌내에서 methoxamine에 의한 혈압상승의 작용점인 alrfia-1 adrenoceptor의 흥분에는 영향을 미치지 못하나 clonidine의 작용점인 alpha-2 adrenoceptor의 흥분에 의한 혈압하강및 심박수 감소효과는 억제한다고 추론하였다.thin 함량은 110.6 mg/L로서 산업적인 생산성이 있는 것으로 나타났다. 이번 연구를 통하여 개발된 변이주 B76 및 이의 대량 발효를 위한 최종조건의 정립은 향후 astaxanthin의 산업적 생산공정에 필요한 기초자료로 이용될 것으로 기대된다.색총말내에 소형의 도형, 소형의 장형 연접소포 및 DENSE CORE VESICLE의 3가지 연접소포를 가지고 있었고 출현빈도수는 촉각엽에서 가장 큰 33%이었다. 제5형 신경연접은 축색종말내에 중등도크기의 원형, 대형의 원형연접소포 및 DENSE CORE VESICLE을 포함하였고 13%의 출현빈도수로 관찰되었다. 배추횐나비의 촉각에 있는 지각신경세포가 뇌의 촉각엽으로 뻗어 들어가 위의 5가지 신경연접중 어느 형을 형성하는지를 관찰하기 위하여 좌측 촉각의 기부를 제거하여 지각신경세포를 절단하였는데 그 결과, 좌측 촉각엽에서 제4형의 신경연접이 퇴행성 변화를 나타내었다.