• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.2
• /
• pp.267-290
• /
• 2018

This paper reviews and criticizes the EU Case of C-452/13, Germanwings GmbH v. Ronny Henning. Under this case, Ronny Henning later sued Lufthansa's budget carrier Germanwings after it refused to pay him 250 euros compensation for a delay he said totalled more than three hours. Germanwings, however, maintained his flight had arrived only two hours and 58 minutes behind schedule. In those circumstances, the following question to the European Court of Justice (ECJ) for a preliminary ruling: What time is relevant for the term time of arrival used in Articles 2, 5 and 7 of Regulation [No 261/2004]: (a) the time that the aircraft lands on the runway (touchdown); (b) the time that the aircraft reaches its parking position and the parking brakes are engaged or the chocks have been applied (in-block time); (c) the time that the aircraft door is opened; (d) a time defined by the parties in the context of party autonomy? ECJ says that the situation of passengers on a flight does not change substantially when their aircraft touches down on the runway at the destination airport, when that aircraft reaches its parking position and the parking brakes are engaged or when the chocks are applied, as the passengers continue to be subject, in the enclosed space in which they are sitting, to various constraints. Therefore, it is only when the passengers are permitted to leave the aircraft and the order is given to that effect to open the doors of the aircraft that the passengers may in principle resume their normal activities without being subject to those constraints. ECJ rules that it is apparent that Articles 2, 5 and 7 of Regulation No 261/2004 must be interpreted as meaning that the concept of 'arrival time', which is used to determine the length of the delay to which passengers on a flight have been subject, corresponds to the time at which at least one of the doors of the aircraft is opened, the assumption being that, at that moment, the passengers are permitted to leave the aircraft.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.19-24
• /
• 2005

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.157-168
• /
• 2006

Spatial detection system such as AVI, GPS, and Beacon etc. can provide spatial travel time only after a vehicle Passes through a road section. In this context, majority of the existing studies on the link travel time estimation area has focused on the arrival time-based link travel time estimation. rather than departure time-based link travel time estimation. Even if some of the researches on this area have developed departure time-based link travel time estimation algorithms, they are limited in that they are not applicable in a real-time mode. The objective of this study is to develop an departure time-based link travel time estimation algorithm which is applicable in a real-tine mode. Firstly, this study discussed the tradeoff between accuracy and timeliness of the departure time-based on-line link travel time estimates. Secondly, this study developed an departure time-based on-line link travel time estimation algorithm which utilizes the Baysian inference logic. It was found that the proposed approach could estimate departure time-based link travel times in a real-time context with an acceptable accuracy and timeliness.

• The Journal of the Korea Contents Association
• /
• v.6 no.5
• /
• pp.14-19
• /
• 2006

In this paper, we describe an arrival time guidance system of circular vehicles using GPS, CDMA and TCP/IP technology. The on-board equipment consists of a GPS receiver and a PDA phone. The on-board equipment sends the current position data of the vehicle to the positioning server via CDMA and Internet. The server predicts the arrival time to the next bus-stop. Any user can lookup the current position and the predicted arrival time of the vehicle utilizing his mobile phone, PDA phone, or Web.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1281-1283
• /
• 2013

최근 커피에 대한 수요와 스마트기기를 이용한 어플리케이션의 사용률이 급증하고 있다. 기존의 시스템들은 예측 기능이 없었기 때문에 고객들은 정확한 시간에 서비스를 제공받기 어려웠다. 그러나 바쁜 현대인들에게 시간 개념은 매우 중요하다. 본 논문에서는 고객의 도착 시각을 예측하여 고객이 카페에 도착하자마자 따뜻한 커피를 바로 제공할 수 있는 커피앤코(Coffee&Co) 시스템을 제안한다. 커피앤코 시스템은 도착 시각 예측 시스템을 의미하며, 본 논문에서는 웹의 인터페이스 구현과 내부적인 기능을 소개한다. 커피앤코 시스템을 통하여 사용자들은 미리 주문한 커피를 카페에 도착하자마자 바로 제공받을 수 있고, 카페 입장에서는 매출을 올릴 수 있는 수단이 될 것으로 기대한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.473-474
• /
• 2021

일반적으로 대학교에서 제공하는 통학버스 애플리케이션은 버스의 위치나 도착시각 같은 정보를 제공해주기 위해서 GPS 수신기와 같은 추가 장비를 설치해야 하는 비용 문제로 인해 버스 시간표, 노선도 등 단편적인 정보만을 제공해주고 있다. 본 논문에서는 이에 대한 해결방안으로 실시간 도로 교통 정보가 반영된 네이버 길 찾기 API를 사용하여 버스 도착시각을 학생들에게 제공해주는 통학버스 애플리케이션을 설계한다. 현재 단편적인 정보만을 제공해주는 대학교 통학버스 애플리케이션에 도입된다면 대학교 학생들의 통학버스 이용의 질을 향상할 수 있을 것이다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.101-111
• /
• 2017

This study propose a method to predict the bus arrival time by considering the signal delay time which is an element which can not be considered in the current bus arrival prediction information generation algorithm. In order to consider the signal delay time, travel time is divided into three components: service time, cruising travel time, and signal delay time. Signal delay time was estimated using intersection arrival time and TOD. The results show that most of the errors that occurred in predicting the arrival time are within about 30 seconds. Some of the estimates have large errors due to the nature of this methodology that uses the estimated value of the intersection arrival time rather than the observation value. It is also difficult to predict the arrival time of the express buses using this method. Future studies such as improving this through real-time location information will greatly improve the accuracy of the methodology.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.348-352
• /
• 2005

본 논문은 조선소에서 계획기간동안 각 플랜트의 생산일정에 따른 블록의 모든 수송요구량이 미리 알려져 있는 정적인(static) 수송환경을 고려한 트랜스포터 일정계획문제를 다룬다. 조선소 내에서 블록들의 수송은 몇 가지 특성을 가진다. 500톤을 초과하는 거대 블록들은 2대 이상이 결합된 새로운 형태의 트랜스포터를 이용하여 운반된다. 운반이 요구되는 블록들 중 일부는 계획기간동안 규정된 출발요구시각에 pick-up되기를 요구하는 반면 나머지 블록들은 계획기간동안 규정된 도착요구시각 전에 delivery되기를 요구한다. 이러한 트랜스포터의 결합 및 시간 제약은 문제를 더욱 복잡하게 하는 요인이 된다. 본 논문에서는 계획기간 내에 모든 블록운반 요구사항들(출발지와 도착지, pick-up과 delivery 시각, 톤수, 결선 등)을 만족시키는 트랜스포터 일정계획문제를 다룬다. 트랜스포터 일정계획문제에서 중요한 주제는 총 로지스틱스 시간 (공차운행시간, delay 시간 및 tardy 시간)을 최소화하기 위해 계획기간 내에 최소의 트랜스포터 운영대수로 각 트랜스포터에 어떤 블록을 할당하고 어떤 순서로 운반할 것인 지를 결정하는 것이다. 이에 본 논문에서는 주어진 트랜스포터 일정계획문제를 해결하기 위해, 1단계에서 최소비용 네트워크 흐름문제를 근간으로 트랜스포터의 최소사용대수를 구하고 이를 기초로 2단계에서 각 트랜스포터에의 블록 할당과 운반순서를 결정하는 2단계 휴리스틱 알고리즘을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.86-97
• /
• 2009

RTLS is a system for automatically locating and tracking people and objects. The TDOA-based RTLS determines the location of the tag by calculating the time differences of a signal received from the tag. In TDOA-based RTLS, time synchronization is essential to calculate the time difference between readers. This paper presents a precision time synchronization method for TDOA-based RTLS over IEEE 802.15.4. In order to achieve precision time synchronization in IEEE 802.15.4 radio, we analyzed the error factors of delay and jitter. We also deal with the implementation of hardware assisted time stamping and the Kalman filtering method to minimize the error factors. In addition, this paper described the experiments and performance evaluation of the proposed precision time synchronization method in IEEE 802.15.4 radio. The results show that the nodes in a network can maintain their clocks to within 10 nanoseconds offset from the reference clock.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.86-89
• /
• 2018

This paper introduces a ZigBee network-based four-lane lap time measurement system that can be set up for short-distance races. The instructions "Ready-Set-Go" can be announced at the entry point node when the start button is pushed, and foot switches installed at the exit point node can be stepped on by the runner for lap time measurement of the race. The start and exit point nodes are connected to a ZigBee network to communicate time synchronization packets. The exit point node maintains synchronized local time within 10 ms at most. The system does not need expensive measurement equipment and provides lap time recording in a more convenient manner than conventional lap time measurement methods.