• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.3
• /
• pp.239-254
• /
• 1988

In this paper an exciter which performs modulation and amplification is composed of high power(30dBm) VCO(Voltage Controlled Oscillator) using push-pull circuit. Modulation is FSK using PLL(Phase Locked Loop). A single loop PLL synthesizer having sequency range of 42.5-100.5MHz, 25KHz channel spacing and switching time of 1msec converts down the exciter VCO frequency to 1.25MHz. This signal mixed with the FSK modulated signal coming in the phase detector of exciter. The acquisition time of exciter for frequency hoppng is less than 200usec, so the total acquisition time for transmission is less that 1.5msec. There is no need of additional power amplification because power amlifiction by high power VCO is high enough to communicate within near distance. The proposed frequency synthesizer is not complex so it is suitable for low cost slow frequency hopping spread spectrum communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1234-1243
• /
• 1994

We propose an adaptive decoding scheme for a concatenated codes with frequency-hopped spread-spectrum communication system in the presence of a pulse-burst jammer and its performance is analyzed. Concatenated coding system employing binary inner code and Reed-Solomon outer code is investigated and the use of side information is allowed to decode both erasures and errors. Our scheme makes the decoder adapts to the level of jamming by switching between two decoding modes such that the overall block error probability can be reduced. It is shown that the proposed decoding scheme yields a significant performance improvement over a conventional decoding scheme.

• Journal of the Korean Society for Railway
• /
• v.15 no.5
• /
• pp.454-458
• /
• 2012

The CBTC(Communication based Train Control) and WPAN(Wireless Personal Area Network) systems employed on 2.4GHz ISM band wireless networks provide complementary service within the same environment. Coexistence between the networks will be impaired if the mutual packets are uncertainty associated the timing or gaussian distance. This paper analyzes the impact of the mutual interference and proposed method to minimize the effect of the WPAN system signals on CBTC system. The performance analysis is illustrated by examining the symbol error rate versus signal to noise interference ratio in terms of carrier frequency offset. The method contributes to reduce the symbol error rate drastically. However it can't be a fundamental solution for the impact on the interference problem. It may be needed for railway only frequency after checking the problems of the current railway frequency.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.63-73
• /
• 2002

초광대역 통신 시스템은 광대역에 걸쳐 주파수 스펙트럼이 기저 대역 잡음과 같이 존재하여 기존의 통신 시스템에 간섭을 주지 않고 고속의 통신이 가능하며, 반송파를 사용하지 않기 때문에 송.수신기의 소비 전력을 감소시키고 그의 구조를 간략화 시킬 수 있다. 본 논문은 신호의 대칭성에 의해 평균값이 0인 안티포달 초광대역 신호를 구성하고 시간 도약 부호를 이용하여 다중접속, 주파수 영역에서 에너지의 평활화 및 재밍 저항(간섭 제거)을 위 한 초광대역 통신 시스템을 제안하였다. AWGN 및 다중접속 환경에서 안티포달 초광대역 통신 시스템의 오류확률, 다중접속시 전송속도에 대해 수치해석을 통해 시스템의 성능을 분석하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.592-592
• /
• 2006

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.718-723
• /
• 2017

We propose a pilot hopping scheme that improves the limited system capacity due to pilot contamination in multi-cell environment with large-scale antenna arrays at a base station, assuming the infinite number of antennas. In the conventional fixed pilot scheme, each user obtains the same signal-to-interference ratio (SIR) over a long period of time. Therefore, a user with strong interference has continuously low SIR which degrades its service quality. In the proposed pilot hopping scheme, different pilot signals are used for each time slot, and different amounts of interference are received every time. When such a pilot hopping technique is applied, the SIR fluctuates at every time slot. When the Hybrid Automatic Repeat & reQuest (HARQ) technique is applied in such a channel, the outage probability and transmission rate are improved. We show that there is the performance gain of the proposed scheme over the conventional scheme through computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.884-891
• /
• 2001

In this paper, We use Antipodal signal for data modulation of Ultra Wideband(UWB) system. This has maximum Euclidean distance and -1 or 0 of correlation values. With adapting this signal to M-ary that and time hopped pattern, We designed multiple access system. UWB Antipodal signal employes Gaussian monopulse and Rayleigh monopulse. Using these signals, we analysis and compare error probability, the number of user and data rate of the two systems under the AWGN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.187-198
• /
• 2004

In this paper, we analyze the performance of BPM (Bi-Phase Modulation) UWB (Ultra Wide Band) multiple access system using PN (Pseudo Noise) code based time hopping sequence in indoor wireless channels. In particular, we compare BPM UWB multiple access system with PPM (Pulse Position Modulation) UWB multiple access system in terms of signalling and demodulation schemes. Moreover, we analytically evaluate the performance of these UWB systems by deriving the bit error rate expressions under the assumption that pulse energy and data transmission rate are identical for both systems. Simulation results in additive white Gaussian noise and realistic indoor multipath wireless channels show that the performance of BPM scheme is approximately 1 dB better than that of PPM scheme. However, the performance discrepancy becomes negligible as the number of users increases.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.762-768
• /
• 2016

In this paper, a method for generating ranging signal to reduce the effects of interference and overcome intentional jamming is proposed in slow frequency hopping(SFH) communication system. A terminal uses ranging signal for initial Up-link synchronization in the frequency hopping communication systems using multi-terminal. However, ranging signal generated by unsynchronized terminal acts as an interference signal to another terminal. Therefore, we propose the design of the ranging signal with PN sequence in order to minimize the affection to the other terminal and simulated its performance. From the simulated result, we confirm synchronization performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.55-61
• /
• 2005

Mobile communication systems are required not only to support high-data-rate transmissions in favorable channel conditions but also to be able to tolerate hostile environments possibly encountered by cellular communications. This paper compares CDMA(Code Division Multiple Access), OFDM(Orthogonal Frequency Division Multiplexing), and MC-CDMA(Multi-Carrier CDMA)with inaccurate channel estimates and low SNR environments. The equations and simulation results show that the performance losses in CDMA systems due to imprecise channel estimates are not considerable while frequency-hopping of OFDM systems can result in more than l0dB SNR losses. Also, this paper show that frequency-spreading of MC-CDMA can be very helpful for channel compensation performances than frequency-hopping or time-spreading of OFDM.