• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.12
• /
• pp.1305-1311
• /
• 2015

A butterfly valve is a type of flow-control device typically used to regulate a fluid flow. This paper presents an estimation of the shape parameter of the Weibull distribution, characteristic life, and $B_{10}$ life for a concentric butterfly valve based on a statistical analysis of the reliability test data taken before and after the valve improvement. The difference in the shape and scale parameters between the existing and improved valves is reviewed using a statistical hypothesis test. The test results indicate that the shape parameter of the improved valve is similar to that of the existing valve, and that the scale parameter of the improved valve is found to have increased. These analysis results are particularly useful for a reliability qualification test and the determination of the service life cycles.

• Applied Chemistry for Engineering
• /
• v.9 no.3
• /
• pp.394-398
• /
• 1998

An optimum synthetic condition was studied for the MCS used as a silicone monomer. The contact mixture was made from the four component catalyst system($CuCl/ZnCl_2/Sn/Cd$) and silicon particles. The contact mass was used for a series of experiments with methyl chloride, which were designed and done to explore the optimum condition for MCS synthesis by an experimental design method. The optimum temperature and MeCl flow rate, which were obtained using 50g contact mass at 60rpm and 1 atm, were in the range of $300-305^{\circ}C$ and of 70-80ccm. Also a continuous run was performed to confirm the conditions. The results showed that the average reaction rate and selectivity were 170(g-MCS/hr.kg-Si) and 0.05 respectively at 67% conversion of MeCl and 92% silicon utilization rate. Also the parameters of overall reaction rate equation and a total pressure were estimated on the basis of the results of the continuous run.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.31-39
• /
• 1990

Deck wetness phonomena has long been considered as one of the factors that degrade the performance of a ship in waves. In rough weather, the frequent shipping of water may give rise to the capsizing of the ship. Therefore an appropriate above water bow design is an improtant assert to a ship of which successful performance in rough weather is a prerequisite such as a warship. In this paper the experimental technique for estimation of deck wetness frequency is presented. The results of the model tests are compared with those of calculation using Ochi's formula. Finally the applicability of Ochi's formula is discussed.

• Journal of The Korean Association For Science Education
• /
• v.31 no.5
• /
• pp.770-787
• /
• 2011

The purpose of this study was to analyze science-gifted students' knowledge-generation processes by analyzing students' inquiry journal. As a result, first, science-gifted students showed various knowledge-generation processes, but they were limited to inductive thinking and abductive thinking, and their thinking processes were very simple. Second, most of the knowledge-generation processes of science gifted were simple, repetitive and diagrammatic processes because of observation and empirical situation of a limited scope. And a simple and repetitive diagram was generated by a simple variable selection and design, observation in limited scope, unbiased intervention by subjective thinking, and absence of exploration or finding errors. And they showed often a logical leap of reasoning.

• Journal of the Korean School Mathematics Society
• /
• v.13 no.1
• /
• pp.125-141
• /
• 2010

The aim of this paper is to develop a web-based Virtual Learning System for discrete mathematics learning using CAS (Computer Algebra System), The system contains a series of contents that are common between secondary und university curriculum in discrete mathematics such as sets, relations, matrices, graphs etc. We designed and developed web-based virtual learning contents contained in the proposed system based on Mathematia, webMathematica and phpMath taking advantages of rapid computation and visualization. The virtual learning system for discrete math provides movie lectures and 'practice mode' authored with phpMath in order to enhance conceptual understanding of each movie lesson. In particular, matrix learning is facilitated with conceptual diagram that provides interactive quizzes. Once the quiz results are submitted, Bayesian inference network diagnoses strong and weak parts of learning nodes for generating diagnostic reports to facilitate personalized learning. As part of formative evaluation, the overall responses were collected for future revision of the system with 10 university students.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1221-1229
• /
• 2014

This paper proposes an approach for predicting the fatigue life of a propeller shaft of a forklift truck by an accelerated life test method. The accelerated life test method adopted in this study is the calibrated accelerated life test, which is highly effective in the prediction of the lifetime and enables significant reduction of the test time as well as a quantification of reliability in the case of small sample sizes. First, the fatigue test was performed under two high stress levels, and then, it was performed by setting low stress levels in consideration of the available test time and extrapolation. Major reliability parameters such as the lifetime, accelerated power index, and shape parameter were obtained experimentally, and the experimentally predicted lifetime of the propeller shaft was verified through comparison with results of an analysis of load spectrum data under actual operating conditions.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.210-216
• /
• 2015

Adsorption of brilliant blue FCF dye using coal based the granular activated carbon from aqueous solution was investigated. Batch experiments were carried out as a function of the adsorbent dose, initial concentration, contact time and temperature. The equilibrium adsorption data were fitted to Langmuir, Freundlich and Temkin models. The results indicate that Freundlich model provides the best correlation of the experimental data. Base on the estimated Freundlich constant (1/n = 0.129~0.212), this process could be employed as an effective treatment method. Adsorption data were modeled using the pseudo-first-order and pseudo-second-order kinetic equations. It was shown that the pseudo-second-order kinetic equation could describe well the adsorption kinetics. The negative Gibbs free energy value (-4.81~-10.33 kJ/mol) and positive enthalpy value (+78.59 kJ/mol) indicated that the adsorption was a spontaneous and endothermic process.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.581-586
• /
• 2015

Adsorption of Safranin using granular activated carbon from aqueous solution was investigated. Batch experiments were carried out as a function of adsorbent dose, initial concentration, contact time and temperature. The equilibrium adsorption data were fitted to Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Based on an estimated Langmuir separation factor, $R_L=0.183{\sim}0.254$ and a Freundlich separation factor, 1/n = 0.518~0.547, this process could be employed as an effective treatment method. Adsorption data were also modeled using the pseudo-first and second-order kinetic equations. It was shown that the pseudo-second-order kinetic equation could best describe the adsorption kinetics. The negative Gibbs free energy (${\Delta}G=-3.688{\sim}-7.220kJ/mol$) and positive enthalpy (${\Delta}H=33.126kJ/mol$) indicated that the adsorption process was spontaneous and endothermic.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1025-1033
• /
• 2003

In common with workers in hydrologic fields, scientists and engineers relate one variable to two or more other variables for purposes of predication, optimization, and control. Statistics methods have improved to establish such relationships. Regression, as it is called, is indeed the most commonly used statistics technique in hydrologic fields; relationship between the monitored variable stage and the corresponding discharges(rating curve). Regression methods expressed in the form of mathematical equations which has parameters, so called parametric methods. some times, the establishment of parameters is complicated and uncertain. Many non-parametric regression methods which have not parameters, have been proposed and studied. The most popular of these are kernel regression method. Kernel regression offer a way of estimation the regression function without the specification of a parametric model. This paper conducted comparisons of some bandwidth selection methods which are using the least squares and cross-validation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1787-1791
• /
• 2009

지표수의 유출과정을 설명하는 과정에서 중요인자이며, 생태수문학의 핵심변수이자 기상모형의 중요한 입력변수인 토양수분의 공간적 시간적 특징들은 강우 및 지하수와 토양수분간의 순환 구조를 규명하는데 매우 중요하다. 가장 널리 쓰이는 토양 수분 측정 장비인 TDR 장비 매설에 앞서 대상유역 선정에 대한 여러 가지 고려사항을 검토하고 수치지형 분석 등을 통한 사전분석을 실시하였다. 대상유역을 선정하기 위해서는 대상유역의 자료획득의 용이함, 지정학적, 시스템 운영적 측면에서의 가용성, 그리고 정밀측량 및 부수적요인 등 여러 요소의 고려가 요구된다. 청미천 유역을 대상으로 약 21 개의 대상후보사면을 정밀조사 하였으며, 충청북도 음성군 수레의산 청소련 수련원내의 산지 사면을 측정대상 사면으로, 지정학적 위치, 식생분포, 지질구조 및 심도 등의 토양특성의 고려를 통해서 선정하였다. 또한 대상 사면에 흐름 발생 및 분포를 계산하기 위해서 대상사면의 지표 및 기반암 표고를 정밀 측량하였으며, 기반암 또는 풍화대까지의 깊이를 실측하여 지표면 및 지하면의 수치지형 모형을 구축하였다. 대상사면 및 지하면에 대하여 표고수치지형모형(Digital Elevation Model:DEM)으로 도식한 후 흐름 발생 공간 분포를 계산하였다. 다양한 흐름 발생 알고리즘으로 기여사면적과 지형습윤지수를 계산하였다. 분배알고리즘의 의해 도출된 지형인자들로 인한 흐름발생 공간적 분포특성을 비교하여 센서의 매설 위치를 결정하였다. 센서 매설 위치에 대한 토양시료를 채취하여 토성을 분석한 결과는 미국 농무성 기준에 의한 분류로는 사양토로, 국제토양학회의 분류기준에 따르면 양토로 분류되었다. 대상사면의 유효입력강우를 확보하기위해서 개방공간인 수레의산 청소년수련원과 대상산림의 Canopy하부에 각각 강수측정 시스템을 설치하였고 약 6개월간 성공적으로 자료를 획득하였다.