• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.135-146
• /
• 2016

Three fiber sources including Russian spruce (Picea jezoensis) and larix (Larix leptolepis), and Myanmar bamboo (Phyllostachys bambusoides) for thermomechanical pulp were explored to replace domestic pine (Pinus densiflora) pulp that has some limitations in an aspect of supply and pitch trouble. Thermomechanical pulps were manufactured under the identical condition, and then compared with their representative pulp properties and pulping process. Both Russian larix and Myanmar bamboo contained large amounts of extractives that would negatively affect mechanical pulping processes. Russian spruce showed the least contents in shives and pitch. Russian spruce and domestic pine reached an optimum freeness level within a short pulp processing time, which consumed less amount of refining energy compared to larix and bamboo. In particular, the spruce wood showed the highest brightness level which might lead to a less consumption of bleaching chemicals. It was expected that Russian spruce could be replaced with the domestic pine wood in respect of both pulping process and pulp quality.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.95-104
• /
• 2008

The purpose of this study was to investigate kinematic coordination and control of lower segments in skill process. For the investigation, we examined the difference of resultant linear velocity of segments and angle vs angle graph. Novice subjects were 9 male middle school students who has never been experienced a taekwondo and expert subjects were 7 university taekwondo players. We analyzed kinematic variables of Dollyochagi motion through videographical analysis and the conclusion were as follows. 1. Examining the graph of novice subjects' maximal resultant linear velocity of the thigh, shank, and foot segment, as it gets closer to the end of the training, the maximal resultant linear velocity in each segment increased. Statistical analysis showed the following results; thigh segment caused the increase of speed, using the trunk segment's momentum in the latter term of learning, while the shank segment utilized the momentum of the adjacent proximal segment at the beginning of learning, and the foot segment in the middle of learning. 2. Until the point where the knee joint angle is minimum, as the novice group learn the skill, the flexion of knee and hip joints has changed into the form of coordination pattern in phase. On the other hand, the expert group showed continual coordination pattern in phase that the movement sequences were smooth. From the knee joint maximal flexion to impact timing, all novice and expert groups showed coordination pattern out of phase. 3. From the knee joint maximal flexion to impact timing, the ankle joint was fixed and the knee joint was extended to all the novice stages and expert subjects.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.706-712
• /
• 2012

The effects of barnyard millet (Echinochloa spp.) content (10~30%) on wheat flour dough and noodle properties were investigated. As the amount of barnyard millet increased, the particle size and ash content of mixed flour increased, while lightness tended to decrease. The gelatinization characteristics of millet flour showed higher peak viscosity, holding strength, final viscosity, and setback compared with wheat flour. There was significant positive correlation between protein content and sedimentation volume, as well as between protein content and water absorption. As the amount of barnyard millet increased, hardness, springiness and cohesiveness of wet noodles tended to decrease. From the results of sensory evaluation, composite flours (addition up to 20% barnyard millet) were rated with a quality score for taste and overall acceptance which was comparable with the control flour.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.338-351
• /
• 2016

Park planning is done in a way to satisfy various expectations, including providing green space and offering urban space with specific and detailed strategies. This study focuses on large-scale parks that have been built since 2000 or that are going to be built. Their significance in the city was analyzed along with strategic characteristics for designing urban parks, and implications are suggested. First, the design aspects of urban parks have gradually tended towards flexibility for adapting to the diverse surrounding environments. Relating the parks to the surrounding area is realized through connection with facilities or planning to process the border area smoothly. Second, unlike in the past, urban parks are not just simply used as a resting space but play other productive and complex roles in the urban space for healing in the community. Third, six design strategies are being applied in these parks through mutually complex relations. Relations with external parties and planning inside the parks add more importance to the park for the community. Fourth, the changes of vertical time are reflected in park planning strategies and tend to form a floor plan. This is associated with growing park planning and is being realized as a major characteristic in urban park planning strategies.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.363-373
• /
• 2000

To understand and investigate chemical characteristics of thermal environment in the southwestern Paciflc, we have measured hydrological and chemical parameters such as temperature, salinity, transparency, pH, nutrients and hydrogen sulfide (H$_2$S). Samples were collected with CTD-casting at 12 station, in Manus Basin including PACMANUS, DESMOS and Susu Knolls, Hydrothermal systems consist of circulation zones where seawater interacts with rock, thereby changing chemical and physical characteristics of both the seawater and the rock. The altered seawater, called hydrothermal fluid, is injected back into the ocean from the hydrothermal vent fields and forms hydrothermal plumes. Consequently, we detected hydrothermal plume with transparency and sulfide anomalies at PACMANUS and Susu Knolls. Sulfide, as geochemical tracer of hydrothermal plume, ranged 0-3.31 ${\mu}$M, and averaged 0.63 ${\mu}$M in the study area. The height, flux and activity of the plume are affected by circulations in the deep water and the spread of plume follows along the isopycnal surface. Therefore the observed H$_2$S anomaly can provide important clue for the source location and it appears that the targestsource in the PACMANUS is aligned in the north-south direction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.121-127
• /
• 2018

A system for diagnosing surface defects of long and large pipe inner overlay welds, 1m in diameter and 6m in length, was developed using a Liquid Penetrant Test (PT). First, CATIA was used to model all major units and PT machines in 3-dimensions. They were used for structural strength analysis and strain analysis, and to check the motion interference phenomenon of each unit to produce two-dimensional production drawings. Structural strength analysis and deformation analysis using the ANSYS results in a maximum equivalent stress of 44.901 MPa, which is less than the yield tensile strength of SS400 (200 MPa), a material of the PT Machine. An examination of the performance of the developed equipment revealed a maximum travel speed of 7.2 m/min., maximum rotational speed of 9 rpm, repeatable position accuracy of 1.2 mm, and inspection speed of $1.65m^2/min$. The results of the automatic PT-inspection system developed to check for surface defects, such as cracks, porosity, and undercut, were in accordance with the method of ASME SEC. V&VIII. In addition, the results of corrosion testing of the overlay weld layer in accordance with the ferric chloride fitting test by the method of ASME G48-11 indicated that the weight loss was $0.3g/m^2$, and met the specifications. Furthermore, the chemical composition of the overlay welds was analyzed according to the method described in ASTM A375-14, and all components met the specifications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7331-7339
• /
• 2014

As the Korean government initiates the Han-style campaign, the efforts and expectations for the modernization and industrialization of Hanok are growing. Accordingly, a major R&D project sponsored by the government is in progress for the development of related technologies, in which the development of a Hanok design support system based on Building Information Modeling(BIM) technology is included as one of the major subjects. However, the development of design tools for Hanok so far has not focused on the windows and doors, which is another major element of Korean traditional architecture. Therefore, this study developed a BIM-based design tool for Hanok windows and doors as an approach to the integrated design of various Hanok elements and their applications to modern buildings. To this end, the characteristics of Hanok windows and doors were analyzed first in terms of the location, opening method, style, components, and the over-all construction. A design tool was then developed with the parametric modeling functions of the $ArchiCAD^{(R)}$system. The applicability and efficiency of the developed tool were verified with design simulations. This is expected to contribute to not only the application of Hanok windows and doors to modern buildings but also to the further development of an integrated Hanok design system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.11
• /
• pp.1591-1595
• /
• 2012

Styela clava (Korean name: miduduk) tunic was produced as a byproduct after processing of S. clava. To utilize S. clava tunic, fish paste containing tunic powder was prepared, and quality characteristics were evaluated for color, textural properties, and sensory attributes. Increasing the amount of S. clava tunic in fish paste tended to decrease lightness (L), redness (a), and yellowness (b) values of the surface part of fish paste. Strength and hardness of fish paste increased with increasing amount of tunic. All test samples with 3 mm thickness showed good flexibility and did not break even after folding in half four times. For overall acceptance in the sensory evaluation, fish paste containing 1% S. clava tunic acquired a relatively higher score. These results suggest that S. clava tunic can be applied to fish paste products to improve quality and functionality.

• Education of Primary School Mathematics
• /
• v.11 no.1
• /
• pp.59-74
• /
• 2008

Mathematical knowledge is not exact definition but the supposition. Considering the nature of mathematics, realization of mathematics teaching which pursues critical thinking and rationality would be our problems. Accordingly, I set the subject of this study whether learning of constructivist discussion, which induces reflective thinking through communicating with others by expression with language of mathematical thinking in discussion, is effective against attitude on Mathematics and Mathematics achievement and study themes are as follows; A. Is learning of constructivist discussion effective against attitude on Mathematics? A-1. Is there any difference of self-conception on the subject between experimental group applied to learning of constructivist discussion and comparative group? A-2. Is there any difference of attitude on the subject between experimental group applied to learning of constructivist discussion and comparative group? A-3. Is there any difference of learning habits on the subject between experimental group applied to learning of constructivist discussion and comparative group? B. Is learning of constructivist discussion effective against mathematics achievement? The objects of study are 30 children of one class in the third grade of elementary school in Seoul for experimental group, and another one class with 30 children is comparative group. Study results and conclusion based on those results are as follows; First, students make reflective thinking through communication each other, therefore, instructor should create discussion environment for communication to express and form their mathematical thinking. Next, adaptability in student's mathematics activities and mathematical ideas should be permissible, and those should become divergent thinking. However, this study analyzed comparative results from only two each class having enrollment of thirty in the third grade. Accordingly, results from students in various grades and environment that are required to get more significant conclusion statistically.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.3-10
• /
• 2008

Cadastral map is a public book that has been composed by continuous parcel having location, number, classification, boundary and an area based on Cadastral Law. A few years ago, cadastral map had been managed by form drawn on 2 dimension plane paper with 7 regular scales. Recently as computer systems are upgrading, cadastral map was able to have a chance to develope one step. Its type has been remade from raster to vector. In result, the cadastral map of vector type becomes to apply variously. Therefore, digital cadastral map has been ready a system to be use with multi-propose by KLIS(Korean Land Information System). In this research, it concretely want presentation of status using land more than original parcel on basic coordination cadastral map and KLIS(Korean Land Information System). The cadastral map is composed as parcel unit was applied by new presentation technique to "Model Research on One Parcel Presentation Technique for Land Status of Cadastral Map". The function of cadastral map on One Parcel Presentation Technique which is not only location relation of possession right and expression of states using land in 28 classifications demonstrated on the cadastral law but also used as foundation data of GIS construct business is developed by lines and classification of parcel to center around public sites of roads, rails, drains and rivers. especially, this research is composed of technique elevation and development of One Parcel Projection Technique of cadastral map in using object of roads among public sites.