• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.117-131
• /
• 2007

Representation of building internal space is an active research area as the need for more geometrically accurate and visually realistic increases. 3 dimensional representation is common ground of research for disciplines such as computer graphics, architectural design and engineering and Geographic Information System (GIS). In many cases CAD plans are the starting point of reconstruction of 3D building models. The main objectives of building reconstruction in GIS applications are visualization and spatial analysis. Hence, CAD plans need to be preprocessed and edited to adapt to the data models of GIS SW and then georeferenced to enable spatial analysis. This study automated the preprocessing of CAD data using AutoCAD VBA (Visual Basic Application), and the processed data was topologically restructured for further analysis in GIS environment. Accuracy of georeferencing CAD data was also examined by comparing the results of coordinate transformation by using digital maps and GPS measurements as the sources of ground control points. The reconstructed buildings were then applied to visualization and network modeling.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.3-12
• /
• 2016

Recently, construction industry shows active expansion in overseas construction market. But the active work limited in construction work, on the other hand, design-drawing work is evaluated shortage of competitive power. So this study aim to improve the competitive of 'domestic design-drawing work'thorough objective evaluation. Objective evaluation is consist of 'design attribution'. Design attribution is based on the execution drawing and complement by existing reasearch, expert interview. And then, list up the 'design attribution' evaluation list to carry out a survey targeting hands-on worker. Survey is consist of 'Likert 5-point scale, FMEA method'. As a result, construction company and design company show different opinions in both relative position evaluation and importance evaluation.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.437-444
• /
• 2008

최근 유비쿼터스 시대를 맞아 건설 분야에서 이용되는 CAD 자료에서 GIS 자료로의 변환 및 융복합에 대한 요구가 증대되면서 상호변환을 위한 연구가 활발하게 진행되고 있다. 본 연구에서는 건설도면 CAD 데이터를 활용하여 수치지도의 건물데이터를 수정, 갱신하기 위한 방법론의 일환으로 건설도면의 건물외곽선을 추출하여 수치지도의 건물데이터 수준으로 일반화하는 선형 단순화 알고리즘을 비교 분석하였다. 선형 단순화 알고리즘은 Douglas-Peucker 알고리즘, Lang 알고리즘, Reumann-Witkam, Opheim 알고리즘을 적용하였으며 분석방법으로는 시각적 분석, 절점 수, 총길이, 면적 변화율 분석 그리고 각 절점이 수치지도 작성내규를 만족하는 비율을 이용하였다. 분석 결과 Douglas-Peycker 알고리즘이 시각적 측면과 절점 수 감소율 측면에서 상대적으로 우수한 단순화 결과를 보여주었으나 수치지도 작성내규 만족도 측면에서는 공통적으로 $50{\sim}60%$ 수준의 만족도를 보이고 있어 국내의 수치지도의 건물데이터를 작성하기 위한 단순화 기법으로는 한계가 있는 것으로 나타났으며 이를 만족시키기 위한 일반화 알고리즘의 개발이 필요하다고 판단된다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.4
• /
• pp.105-112
• /
• 2009

The present serial cadastral maps, which have lots of problems arisen from map matching processes, have very limited applications. That is, the poor quality of serial cadastral maps has kept us from using them. Therefore, a special project for improving the quality of serial cadastral maps was proposed by korean cadastral specialists to solve those problems. The primary purpose of this study is to provide effective ways of serial cadastral map production by reviewing the errors of the present situation-based serial cadastral map production using GIS and digital orthophoto.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.4
• /
• pp.3-11
• /
• 2010

Currently the quality of construction drawings is deteriorated due to restrictions on time costs allowed to the design phase. Moreover shop drawings are arbitrarily produced without the standard criteria, and cleared off after the completion of construction. As a result, the information of produced shop drawings is not feedback to the design phase, and the quality of the construction drawings become worse. This study proposes checklists that include information requested at construction sites and the shop drawings as well as the existing checklists for the construction drawings. The checklists integrate designer's check-items according to breakdown of drawings and contractor's check-items base don construction process. Index matrices of the integrated checklists is developed for practical application of the checklists, and validated through intensive interview with design and construction practitioners.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.4D
• /
• pp.553-560
• /
• 2008

As it was developed to korea standard of the CAD Drawing in Construction CALS/EC for the productivity Improvement in Construction Industry and efficiency rising of construction management. it is high time to design the standard system in water resources. The purpose of this study is to establish the strategies for standard system of drawing information in water Resources parts for construction CALS/EC. This study is to analyse the existing construction drawing standards including CMS, CMMS, drawing guideline of a water Resources public institution, ISO, US National CAD Standard, Japanese Standard. As a result of the analysis, this study proposes the prime structure of the water Resources drawing information standard to support construction CALS/EC. For the establishment of standard system in real practice, this study establishes the numbering system to joint the current standard system for a water Resources order institution and to keep construction CALS/EC. In conclusion, the standard system of drawing information is proposed as a fundamental frame to water Resources parts of construction CALS/EC.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.76-90
• /
• 2011

As most landscape drawings tend to be recorded in electronic format, the need for layer standards is growing. While the categorization system of planting drawings has been progressing, landscape facility drawings are being delayed. So, the purpose of this study was to establish the categorization system of computerized landscape facility drawing documents. In the beginning of this study, it found that the layer categorization system of "The Standards of Construction CALS/EC computerized drawings v1. 1" and "The submit instructions of electronic design documents" are not suitable for the landscape facility drawings. 1,154 drawings drawn by 10 landscape architect offices were used to analyze the current layer categorization status. As a result, it found that "The Standards of Construction CALS/EC computerized drawings v1. 1" were not introduced in landscape facility drawings and 46% of layers were produced indefinitely. The new layer categorization system consisting of 15 facility items was drawn by applying the ISO construction information categorization system. The new layer categorization system is set on the basis of the legal code, landscape design standards, and design guidelines of public institutions. This new layer categorization system is expected to propagate at the landscape architect offices in the early.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1809-1815
• /
• 2022

A digital twin is a technology that creates a virtual world identical to the real world. Problems in the real world can be identified through various simulations, so it is a trend to be applied in various industries. In order to apply the digital twin, it is necessary to analyze the drawings in which the structure of the real world to be made identical is designed. Although the technology for analyzing drawings is being studied, it is difficult to apply them because the rules or standards for drawing drawings are different for each author. Therefore, in this paper, we implement a system that analyzes and classifies the vertex detail, one of the drawings, using artificial intelligence. Through this, we intend to confirm the possibility of analyzing and classifying drawings through artificial intelligence and introduce future research directions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.559-561
• /
• 2000

현재 활발한 연구가 진행중인 유전자 분석과 같은 분야에서는 유전자 염기 서열과 같은 대규모 서열 정보들에 대한 효과적인 분석기술을 요구하고 있다. 본 논문은 이러한 서열 정보들 사이의 유사도를 측정하고 분석하는 작업을 효과적으로 지원하기 위한 가시화 도구의 개발을 다룬다. 본 논문에서 사용하는 유사도 가시화 기법은 유전자 정보의 유사도 가시화를 위해 제안되었던 시각적 점-행렬 도면(Graphical Dot-Matrix Plots) 기법을 이용하는데, 이 시각적 점-행렬 도면 기법은 비교 대상이 되는 서열 정보의 크기가 커지면 효율적으로 가시화하기가 힘들다는 단점을 가진다. 본 논문은 시각적 점-행렬 도면 기법의 이러한 문제를 해결하기 위해 서열 정보 유사도 비교 결과를 화면의 해상도 내에서 표현할 수 있도록 데이터를 영역별로 분할하고 각 영역별 일치도를 이분 그래프(bipartite graph)의 최대 평면 일치(maximal planar matching)를 이용하여 결정하고 이를 하나의 화소(pixel)로 출력하는 기법을 제안한다.

• Proceedings of the Korean Institute of Landscape Architecture Conference
• /
• 2017.10a
• /
• pp.16-18
• /
• 2017

컴퓨터 기술이 발전함에 따라 디지털 게임 속 가상경관은 보다 정교해지고 있으며, 설계 및 구현 과정에서 고려를 요구하는 요소들이 증가하고 있다. 하지만 여태 가상경관 설계를 위한 정형화된 설계 방법론도 전무한 관계로, 디자이너들은 비효율적인 설계 과정을 거치며 동시에 질적으로도 만족스럽지 못한 결과물을 구축하고 있다. Ian McHarg의 도면 중첩법은 레이어 단위로 설계 고려요소를 정리하여 설계를 진행하기에, 설계에 고려할 요소들을 체계적으로 종합하는 디자인의 진행이 가능하다. 이에 본 연구에서는 도면 중첩법을 활용한 가상경관 설계 방법론을 구축하였다. 이를 위해서 우선 가상경관의 공간적 특수성에 따라 분류를 진행하는 분류 방법론을 문헌 조사를 통해 파악하여, 이들을 각각의 레이어로 조직하였다. 그리고 설계 영역으로서의 가상경관과 실공간의 차이점을 파악하여 이들을 기반으로 한 가상경관 설계 방법론을 구축하였다. 마지막으로 프로토콜 분석방법론과 공간 구성요소의 비교분석을 통하여 본 연구에서 구축한 설계 방법론의 유효성을 검증하였다. 검증 결과, 본 설계 방법론은 디자이너들의 작업 시간을 22% 이상 줄일 수 있었으며, 동시에 작품의 질을 향상시킬 수 있었다. 향후 본 설계 방법론은 디지털 게임을 비롯한 가상경관 설계 및 구현의 영역에서 활발한 활용을 기대할 수 있을 수 있으며, 나아가 가상경관을 조경 설계의 한 영역으로써 확장이 가능할 것임을 시사한다.