• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.77-84
• /
• 2015

In 2011, greenhouse gas emissions of transport sector were 85.04 million $tonCO_2eq$ and road emissions accounted for 95% of total emissions in the transport sector. There are few innovative technologies to reduce greenhouse gas emissions aside from eco-driving education and public relation program. Therefore, this paper focused on analyzing optimal acceleration by certain road grades and suggested fuel-efficient driving method for various uphill sections. Scenarios were established by driving modes. Speed profiles were generated by scenarios and speed variations. Each speed profile applied to Comprehensive Modal Emission Model and then each fuel consumption was estimated. Driving mode and speed variation that minimized fuel consumption were driven according to grade percent and uphill distance. When driving in the eco-friendly mode of the driving and speed variation, reduction rate of fuel consumption was evaluated by comparison between eco-driving and cruise control mode. When a vehicle drove under eco-driving mode at 100kph, 90kph and 80kph on uphill road, fuel consumptions were reduced by 33.9%, 30.8% and 5.3%, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.5
• /
• pp.525-531
• /
• 2011

Recently, the demand of environmentally friendly transportation has increased due to the environmental issues. Electric two-wheeled vehicles do not have the noise pollution nor exhaust gases of vehicles with internal combustion engines. Performance evaluation of an electric two-wheeled vehicle was carried out. A driving test on outdoor roads was performed and a chassis dynamometer was used. The chassis dynamometer simulates the road load of the vehicle. The road load influences the tests using the chassis dynamometer. The differences between the table method and the coasting test for setting the road load was compared and analyzed.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.139-146
• /
• 2011

Travelling vehicles on roads may slip or overturn due to strong cross wind. This paper presents the path deviation equation and the overturning equation of vehicle, and the process of evaluating the cross wind risk. Case studies for cars and trucks are carried out. It explains the mechanism why the deviation occurs according to the types of vehicles. It shall help to prepare the measures for reducing the risk of travelling vehicles in high wind speeds.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.3
• /
• pp.223-230
• /
• 2021

Currently, self-driving vehicles are on the verge of commercialization after testing. However, even though autonomous vehicles have not been fully commercialized, 81 accidents have occurred, and the driving method of vehicles to avoid accidents relies heavily on LiDAR. In order for the currently commercialized 3-level autonomous vehicle to develop into a 4-level autonomous vehicle, more information must be collected than previously collected information. Therefore, this paper proposes a Driving Situation Judgment System (DSJS) that accurately calculates the crisis situation the vehicle is in by useing the roughness of the road and the state of the passengers of surrounding vehicles including road information and weather information collected from existing autonomous vehicles. As a result of DSJS's PDM experiment, PDM was able to classify passengers 15.52% more accurately on average than the existing vehicle's passenger recognition system. This study can be a basic research to achieve the 4th level autonomous vehicle by collecting more various types than the data collected by the existing 3rd level autonomous vehicle.

• TTA Journal
• /
• s.173
• /
• pp.6-11
• /
• 2017

자율주행차는 센서와 인공지능으로 차량의 위치와 주변 상황을 인지하고 주행 경로를 계획하여, 자동차 스스로 교통법규에 따라 주행하는 차량이다. 이는 4차 산업혁명의 주역으로 2020년 상용화 될 전망이다. 2020년 자율주행차 세계 시장규모는 189억 달러로 예측되고 이를 위해 각국의 자동차사, ICT 업체들이 시장 선점을 위해 치열하게 경쟁하고 있다. 자율주행 상용화를 위한 기술적 해결 이슈로는 센서, 인공지능, 빅데이터 분석, 기능안전, 정밀지도, 신뢰성 높은 차량통신, 차량 SW 플랫폼, 차량 사이버 보안 등이 있다. 이러한 기술적 이슈가 해결되어야 2020년 자율주행차 시대를 맞이하고 새로운 시장이 열리게 될 것이다. 자율주행차 상용화를 위해서 차량, ICT 기술, 도로 인프라 등 산업 융합 및 기업체 간 협업이 기술개발과 사업화를 성공시키는 중요한 열쇠가 될 수 있다는 것을 강조하며, 이번 특집호를 통해 자율주행 실현을 위한 핵심기술 및 표준화에 대한 전체적인 흐름과 방향을 파악하는데 도움이 될 것으로 기대한다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.3
• /
• pp.132-145
• /
• 2020

By coming of the 4th industrial revolution era, HD map have became a key infrastructure for determining precise location of autonomous driving in areas of futuristic cars, logistics and robots. Autonomous vehicles have became more dependent on HD map to determine the exact location of objects detected by various sensors such as LiDAR, GNSS, Radar, and stereo cameras as well as self-location decisions. By actualizing autonomous driving and C-ITS technologies, the demand for precise information on HD map have increased. And also the demand for the creation of new information based on the convergence of various changes and real-time information have increased. In this study, domestic and international HD map standards and related environments have analyzed. Based on this, usability has researched which comparison with standard HD map established by various institutions. Additionally, usability of standard HD map have studied for applying actual autonomous vehicles by reworking HD map. By the result of study, standard HD map have well established to use by various institutions. If further research about layer classification and definition by institutions will carried out based on this study, it has expected that and efficient establishment and renewal of HD map will take place.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.453-459
• /
• 2006

This paper presents an experimental evaluation of wandering effect on asphalt concrete pavement responses. A laser-based wandering system has been developed and its performance is verified under various field conditions. The portable wandering system composed of two laser sensors with Position Sensitive Devices can allow one to measure the distance between laser sensors and tire edges of moving vehicle. Therefore, lateral position of each wheel on the pavement can be determined in a real time manner. Pavement responses due to different loading paths are investigated using a roll over test which is carried out on one of asphalt surfaced pavements in the Korea Highway Corporation test road. The pavement section (A5) consists of 5 cm thick surface course; 7 cm intermediate course; and 18 mm base course, and is heavily instrumented with strain gauges, vertical soil pressure cells and thermo-couples. From the center of wheel paths, seven equally-spaced lateral loading paths are carefully selected over an 140 cm wandering zone. Test results show that lateral horizontal strains in both surface and intermediate courses are mostly compressive right under the loading path and tensile strains start to develop as the loading offset becomes 40 cm from the wheel path. The development of the vertical stresses in the top layers of subbase and anti-frost is found to be minimal once the loading offset becomes 50 cm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.3
• /
• pp.563-570
• /
• 2024

This paper proposes a method to recognize and track drivable lane areas to assist the driver. The main topic is designing a deep-based network that predicts drivable road areas using computer vision and deep learning technology based on images acquired in real time through a camera installed in the center of the windshield inside the vehicle. This study aims to develop a new model trained with data directly obtained from cameras using the YOLO algorithm. It is expected to play a role in assisting the driver's driving by visualizing the exact location of the vehicle on the actual road consistent with the actual image and displaying and tracking the drivable lane area. As a result of the experiment, it was possible to track the drivable road area in most cases, but in bad weather such as heavy rain at night, there were cases where lanes were not accurately recognized, so improvement in model performance is needed to solve this problem.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.35-45
• /
• 2005

The speed enforcement camera has been regarded as one of the most important safety countermeasures. Drivers decelerate in front of the speed enforcement camera and gain speed up after passing the camera. So there is a strong need to develop the method how to place the camera to overcome this problem. This study applied the concept of design consistency to the installation of the camera, so speed difference along the road sections should be controlled within the predetermined boundary. Specially, this study also regarded camera as the one of the elements of the road alignments which can change the speed of drivers abruptly, and suggested the way to put this concept into the selection of the placement of the camera.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.139-146
• /
• 2021

Ahead of the commercialization of autonomous vehicles, it's application should be considered into the current transportation infrastructure. Under limited traffic circumstances, effective set of lane change rules alone could bring benefits to the autonomous driving system. In this study, a cooperative movement (local platooning) plan with limited vehicles associated as pocket driving, aiming at effective movement between vehicles in urban environment was proposed. Under congested roadway condition, the gaussian gap between vehicles was introduced to secure gap acceptance for safe lane change maneuver. Proposed lane change method showed 86.6% delay reduction along with traffic volume improvement. This result could be considered as a crucial factor in designing a next-generation roadway infrastructure with autonomous driving.