• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.17-21
• /
• 2015

There have been sustained developments of advanced technologies using traffic safety facilities recently and techniques for identifying failure modes and devices which could result in fatal outcomes. The purpose of this research is aimed at improving the driving conditions in advance through analyzing the IT convergence, driving education, researches for vehicles, field of construction and robotics. The researchers evaluate on usability tests of the driving with 26 candidates through focusing on safety, convenience, efficiency, effectiveness. Using specialized LED panel to enhance driving performances of disabled people are for cautious road conditions like foggy weather or heavy rain. As a result, there were improvements in the driving conditions, and candidates reported this system was helpful. It allows them for maintaining proper driving all times and was especially informative for people with low vision or visually impaired. This system plays a pivotal role as a prevention mechanism not only for regular drivers but also for further delict of traffic violations or accident offenders who already have former record on tort.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.235-245
• /
• 2008

Since rapidly increase of tunnel with increasing of expressway, the study on safety improvement of safety device at entrance of expressway tunnels is necessary. The existence of tunnel occurs more speed reduction than an upward slope by itself, the collision accident of tunnel entrance causes heavier damage than that of general accident on the road. So, many kinds of safety devices such as poly-ethylene barrier, guard-rail are placed on the road side. But these devices affect the drivers as an obstacle. Although there are various safety devices that are placed at tunnel entrance, this study is related to following 2-cases. One is that the poly-ethylene barrier is placed and the other is that a safety devices is not placed. The reason that these two cases are selected, is that poly-ethylene barrier is usually placed at many tunnel entrances and safety devices can affect the drivers as an obstacle. This study is related to the difference of right-hand side clearance between inside tunnel and outside tunnel, too. The average difference observed car speed and VDS(vehicle detect system) speed nearby the tunnel is analysed. Through the statistical analysis of the average difference, this study suggests an alternatives on safety improvement of safety devices at entrance of expressway tunnels. It is concluded that the small difference of right-hand side clearance is desirable to drivers when a poly-ethylene barrier is placed. And when the difference of right-hand side clearance is large, no safety devices is desirable, and when the difference of right-hand side clearance is small, poly-ethylene barrier should be placed to improve safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.559-569
• /
• 2021

In this study, using structural equation modeling, a policy acceptance evaluation model was developed to evaluate the service items of roadsthat affect the acceptance of the Safety Speed 5030 policy. The relationship of influence on policy acceptance was found to be as follows: In the driver group, satisfaction with mobility (0.411), economy (0.217), safety (0.181), and environment (0.089) are in the order of top priority; and in the non-driver group, satisfaction with safety (0.466), mobility (0.223), environment (0.194), and economy (0.111) are in the order of top priority. From these results, in order to increase acceptance of the Safety Speed 5030 policy, it is necessary to differentiate the provision of services according to the characteristics of each road user type. This infers it is important to improve mobility for roads with a high hierarchy mainly used by driver groups, and to improve safety for roads with low hierarchy mainly used by non-driver groups. Therefore, the evaluation model for acceptance of the Safety Speed 5030 policy suggested in this study can be used as basic data for activating the Safety Speed 5030 policy in the future by reflecting the qualitative evaluation of users.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.573-582
• /
• 2014

Since there is no clear installation criteria on minimum spacing between signalized intersection and minor road, many problems have occurred in terms of traffic operation and safety. Even though many studies about entrance/exit intersection have been done in operational aspects, there is no specific and detailed research between the signalized intersection and minor road by now. Thus, this research suggests the optimal spacing between signalized intersection and minor road considering traffic operation and safety. Also, survey on vehicle behavior was conducted in this research. In conclusion, by suggesting the required minimum spacing between signalized intersection and minor road, it can be contribute in establishing and operating the installation criteria between signalized intersection and minor road.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.133-144
• /
• 2003

The current procedure of estimating accident reduction benefit shows fixed accident rates for each level of roads without considering the various characteristics of roadway geometries, and traffics. In this study, in order to solve the problems mentioned in the above, models were developed considering the characteristics of roadway alignments and traffic characteristics. The developed models can be used to estimate the accident rates on new or improved roads, In this study, only urban highways were included as a beginning stage. First of all. factors influencing accident rates were selected. Those factors such as traffic volumes. number of signalized intersections, the number of connecting roads, number of pedestrian traffic signals, existence of median barrier, and the number of road lane are also selected based upon the obtainability at the planning stage of roads. The relationship between the selected factors and accident rates shows strong correlation statistically. In this study, roads were classified into 4 groups based on number of lanes, level of roads and the existence of median barriers. The regression analysis had been performed for each group with actual data associated with traffic, roads. and accidents. The developed regression models were verified with another data set. In this study, in order to develop the proposed models, only data on a limited area were used. In order to represent whole area of the country with the developed models. the models should be re-analyzed with vast data.

• Transportation Technology and Policy
• /
• v.1 no.3
• /
• pp.96-104
• /
• 2004

• 한국도로학회:학술대회논문집
• /
• 2004.10a
• /
• pp.303-308
• /
• 2004

• 도로교통
• /
• s.103
• /
• pp.38-51
• /
• 2006

• 한국도로학회:학술대회논문집
• /
• 2005.11a
• /
• pp.379-384
• /
• 2005

• The Monthly Technology and Standards
• /
• s.19
• /
• pp.58-58
• /
• 2003