• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.159-166
• /
• 2009

On freeways, factors inducing traffic accidents consist of two major elements such as driver factors and road environment factors. Research have been done and shown that there would be relationship between design elements such as radius, slopes, superelevations, and observed speeds and accident rates. The present paper confirms that these elements are correlated with accident rates. Furthermore, the paper identifies standard deviation of these elements as the design consistency and compare them with reduction of accident rates. This type of work leads to identify the fact that standard deviations based design consistency are correlated with accident rates. The results of the paper may contribute to encourage the quantified use of design consistency during highway design.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.2 s.20
• /
• pp.29-37
• /
• 2002

Many of the traffic accidents on roads are a result of alignment defect of the roads. This alignment of the road needs to lie analyzed with accuracy for improving design of road, and it needs the design drawing of road, and coordinates of the main point. Accordingly, in this study the precision of location based on existing design drawing was compared with the data acquired by the combination of RTK GPS/GLONASS. The result of study is included within range 5cm, we would like to propose an effective and useful approach method to utilize the satellite for road alignment information system by evaluating the represented road alignment.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.25-31
• /
• 2010

Road design guideline provides the directions on how to design a road alignment based on design speed, and this guideline has a design expectation in that design speed is supposed to be equal to the operating speed of drivers. Horizontal curve design is also based on design speed, and minimum radius is derived based on the drivers comfort while negotiating the curve. However, side friction reflecting drivers comfort is lower than a physical friction measured on wet road surface, therefore, it is reasonable to regard the criterion on minimum radius has a safety margin. Futhermore, the practical preference of choosing the larger radius than minimum leads to a noticeable gap between design speed and operating speed, so links to the violation of design expectation implicated in the guideline. In order to review this assumption, friction and operating speed at rural roads was measured and observed. As the results, a safety margin brought out by the gap between comfort-based friction and measured friction is qualitatively derived. Also, the gap between design speed and operating speed presumably caused by the safety margin and practical preference is analysed. By this, it is suggested that current design guideline should provides not only the minimum radius but also the management of road alignment design to minimize the gap between the design speed and operating speed.

• 한국도로학회지:도로
• /
• v.15 no.3
• /
• pp.40-45
• /
• 2013

• 한국도로학회지:도로
• /
• v.12 no.1
• /
• pp.20-25
• /
• 2010

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.91-101
• /
• 2003

This study modeled 4-lane highway in three-dimensional virtual reality in order to overcome difficulties of field experiment. and the research subject was placed in a driving simulator. We survey the driver's cognitive characteristics to the alignment changes in the three-dimensional virtual reality highway. Especially, maximizing the identity of driving movements and virtual scenery on the basis of the data obtained by dynamic analysis module. we minimized simulator sickness for the graphic module of driving simulator. And we carried out cognitive evaluation on the basis of adjective words extracted by dictionary and the opinion of specialist. In this study LISREL model was used to detect the causal relation between geometry and safety in cognitive side, and found that geometric change affects the safety of drivers by static and dynamic road safety model in three-dimensional combined alignments. As the result, for constructing safety road. we consider drivers' cognitive characteristics as human factors in road design, and we think that they are very important factors to improve road safety.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.247-255
• /
• 2008

According to "A guide Book to Highway Design", most road elements are chosen based on a certain design speed in order to ensure obtaining safe and smooth traffic operating. However, road safety in practical way is corelative to not only all element of roads but also road shape, for example, between straight line and curves line and between curved lines. Also, it is relates to alignments such as horizontal alignment, vertical alignment, and cross section. That is, the practical road design should be examined in both sides of 3 dimension and consecutiveness as the practical road is a 3-dimensional successive object. The paper presents a concept for acceleration to evaluate consistency of road considering actual road shape on 3-dimension. Acceleration of vehicle is influential to road consistency based on running state of vehicle and state of drivers. Especially, the magnitude of acceleration is a quite influential element to drivers. Based on above, the acceleration on each point 3-D road can be calculated and then displacement can be done. Computation of acceleration means total calculation on each axis.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.139-146
• /
• 2004

Road design should be conformed to the expectancy of drivers. The alignment such as long tangent followed by the sharp horizontal curve should be avoided for the road design consistency. Currently, operating speed profile model is generally used to check the consistency of the successive road alignments. In this model, the hypothesis about the drivers' behaviour on the long tangent followed by the sharp horizontal curve is also included. This study compares the hypothesized drivers' behaviour in the existing operating speed profile model with the actual drivers' behaviour observed at the two lane rural roads. In addition to this, comparison between the acceleration for the vehicles approaching and departing horizontal curves suggested by the foreign research and the value observed at this study was made, From this study, it was concluded that the hypothesis in the existing model was well representing the actual drivers' behaviour. The deceleration for vehicles approaching the horizontal curves was ranged $0.39{\sim}1.06m/s^2$ with the average of $0.66m/s^2$. The average acceleration for the vehicles departing horizontal curves was $0.22m/s^2$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.293-299
• /
• 2003

In the future, the design of road should be convenient in using of high-technology information and it needs the design of alignment that is able to make the maximum vehicles inducement function appropriated for CNS(Car Navigation System). So it needs to analysis appropriately the alignment of road for the improvement design of road which is established and to make the design of road and the coordinate of the main points. Therefore, this research had acquired the road data by RTK-GPS to accurate the analysis of road alignment and compared with Total Station. As the result, we could acquire the design source of the road alignment using RTK-GPS. Also, it was estimated the accuracy after comparing the design with RTK-GPS coordinates. We made an analysis of the degree of slant or the ups and downs of surface. We made an analysis of three dimensional visual information which was included in GSIS concept and estimated the accuracy. Finally, we analyzed the earth volume calculation by comparing with Total Station.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.141-153
• /
• 2010

The study is about the development of operating speed prediction models aimed for an evaluation of design consistency of four lane rural roads. The main differences of this study relative to previous research are the method of data collection and classification of road alignments. The previous studies collected speed data at several points in the horizontal curve and approaching tangent. This method of collection is based on the assumption that acceleration and deceleration only occurs at horizontal tangents and the speed is kept constant at horizontal curves. However, this assumption leads to an unreliable speed estimation, so drivers' behavior is not well represented. Contrary to the previous approach, speed data were collected with one and data analysis using a speed profile is made for data selection before building final models. A total of six speed prediction models were made according to the combination of horizontal and vertical alignments. The study predicts that the speed data analysis and selection for model building employed in this study can improve the prediction accuracy of models and be useful to analyze drivers' speed behavior in a more detailed way. Furthermore, it is expected that the operating speed prediction models can help complement the current design-speed-based guidelines, so more benefits to drivers as real road users, rather than engineers or decision makers, can be achieved.