• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2C
• /
• pp.191-199
• /
• 2006

In this paper, we propose a method to implement a predistorter of the $rho$-th order inverse filter structure to prevent signal distortion and spectral re-growth due to the high PAPR (peak-to-average ratio) of the OFDM signals and the non-linearity of high-power amplifiers. We model the memory-less non-linearity of the high-power amplifier with a polynomial model and utilize the inverse of the model, the $rho$-th order inverse filter, for the predistorter. Once the non-linearity is modeled with a polynomial, since we can determine the $rho$-th order inverse filter only with the coefficients of the polynomial, large memory is not required. To update the coefficients of the non-linear high-power amplifier model, we can use LMS or RLS algorithms. The convergence speed is high since the number of coefficients is small, and the computation is simple since manipulation of complex numbers is not necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1561-1567
• /
• 2013

This paper is regarding the helicopter flight control law design for the handling quality performance. MIL-F-83300 and ADS-33E specification is used of the helicopter flight handling quality and to meet these requirements, ACAH type controller is required. This paper described the ACAH type controller design and performance evaluations. Helicopter dynamics first developed as nonlinear dynamics including rotor dynamics and then linear model was extracted from hovering to forward flight mode using trim condition. Control law used the model following to meet the handling qualities, the simple inverse model as feed forward gain, decoupling logic and phase model to decouple the axes, and linear model to calculate the coefficients. Handling quality evaluation used the matlab based Conduit tool and verified that Level 1 requirement is satisfied.

• 한국해양학회지
• /
• v.25 no.4
• /
• pp.161-181
• /
• 1990

A numerical model is established in order to simulate the storm surges which were observed in the seas around Korea during typhoon and winter storm periods. The typhoons are Brenda (1985), Vera (1986) and Thelma (1987). the winter storm period is January 1-6, 1986. The simulated surges for the typhoon periods show good agreements with the recorded ones for the periods at the Korean coasts, but those for the winter storm show fair agreements in general tendencies, not in details. The model simulation in open sea shows a positive sea level near the typhoon center and a native sea level behind the typhoon. the positive surge seems to be due to the low pressure near a typhoon center and the negative on due to the wind stresses of the typhoon. The negative sea level is usually in the form of an elongated gyre. In the gyre, there is a cyclonic circulation of sea water, in which the pressure gradient force induced by the circular depression of the sea surface is balanced by the Coriolis force in readjusting stage.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.19-23
• /
• 2007

We derived analytically the generalized curvature linear equation useful in the initial optical design of a two-mirror system with finite object distance, including an infinite object distance from paraxial ray tracing and Seidel third order aberration theory for coma coefficient. These aberration coefficients for finite object distance were described by the curvature, the inter-mirror distance, and the effective focal length. The analytical equations were solved by using a computer with a numerical analysis method. Two useful linear relationships, determined by the generalized curvature linear equations relating the curvatures of the two mirrors, for the cancellation of each aberration were shown in the numerical solutions satisfying the nearly zero condition ($<10^{-10}$) for each aberration coefficient. These equations can be utilized easily and efficiently at the step of initial optical design of a two-mirror system with finite object distance.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.80-86
• /
• 2010

Carbon nanotubes (CNTs) exhibit excellent mechanical, electrical, and magnetic properties as well as nanometer scale diameter and high aspect ratio, which make them an ideal reinforcing agent for high strength polymer composites. The functionalized CNTs are believed to be very promising in the fields such as preparation of functional and composite materials. CNT-Polymer composites are expected to have good processability characteristics of the polymer and excellent functional properties of the CNTs. However, since CNTs usually form stabilized bundles due to Van der Waals interactions, are extremely difficult to disperse and align in a polymer matrix. The biggest issues in the preparation of CNT-reinforced composites reside in efficient dispersion of CNTs into a polymer matrix, and the alignment and control of the CNTs in the matrix. There are several methods for the dispersion of nanotubes in the polymer matrix such as solution mixing, bulk mixing, melt mixing, in-situ polymerization and chemical functionalization of the carbon nanotubes, etc. These methods and preparation of high performance CNT-polymer composites are described in this review.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.217-225
• /
• 1993

The cost/benefit analysis method is frequently used in the feasibility study of investments on geo-spatial information system. The cost/benefit analysis method has been applied extensively in the feasibility study of conventional information systems and recently efforts has been made to apply this method to geo-spatial information systems as well. This study efforts were made to present a cost/benefit model suitable for Korean GSIS and this model was then applied to Facility Management. In establishment of the cost model, the items of various costs were defined and a survey was made to find the average unit cost of each item. For the benefit model, the benefits of implementing a geo-spatial information system is classified into tangible and intangible benefits and only th tangible benefits were further classified. The established cost/benefit model was then applied to a gas distribution company with more than 100 employees and more than 300,000 customers. A GSIS was designed and the cost its implementation was compared to the present manual method of operation.

• Journal of architectural history
• /
• v.21 no.5
• /
• pp.19-32
• /
• 2012

The purpose of this paper is a study on the dome plan of S. M. del Fiore Church of F. Brunelleschi. The results of study are as follows: 1. The planning of floor, elevation and cross section plan of S. M. del Fiore church is basically planned by each other correlation. In particular, the octangular form of geometrical standard which is formed with altar as the center at the crossing part is important component elements which is decided by not only the dome, but form and size of the drum and floor plan form of the lantern 2. The dome which has been planned by F. Brunelleshi has completed the new dome, preserving gothic thought intended by the church plan after study on architecture of ancient Rome with Pantheon. And the dome which is a main space of church through all aspects of plan, structure, function and construction about the dome is a opportunity in the beginning of Renaissance architecture which is a new epoch and a turning point of architecture on various point of view. 3. The dome which is constructed by F. Brunelleshi has been planned through the innovative solution by the refusal of traditional semicircle form dome, centering use and creation double-shell structure form for the first time in history. And the construction of dome has been solved with the invention of various construction equipments and machineries, the stone rib planned for connection and reinforcement about shells of the octangular form, the support method for reduction the gravity of bricklayers work and the brick work of nock-patterned shape which is masonry construction method of the architecture of ancient Rome.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.23-30
• /
• 2011

In this study, deterioration degrees of concrete were investigated at laboratory under seawater attack and cycling freeze-thaw, which are major durability performance deterioration factors of concrete. Deteriorations of mixed concrete using Portland & blended cement were examined by instrumental analysis of changes in relative dynamic modulus of elasticity and compressive strength. After 520 cycles of freeze-thaw, relative dynamic modulus of elasticity and compressive strength of concrete mixed with normal Portland and LHC over 75% showed relatively low resistance of approximately 44% of those values of SRC. Concrete replaced with 50% fine powder of blast furnace slag showed the most excellent freeze-thaw resistance among the tested blended cement concrete.

• Journal of Environmental Policy
• /
• v.8 no.3
• /
• pp.81-113
• /
• 2009

This study conducted a regulatory impact analysis regarding the introduction of the Korean version of REACH(Registration, Evaluation and Authorization of Chemicals). The direct cost of the Korean REACH is estimated at a total of 101 billion Korean won over the 11 year period. The cost includes pre-registration, testing, registration, Chemical Safety Assessment(CSA) and Chemical Safety Report(CSR), evaluation, and the authorization costs of 15,223 chemical substances produced and imported more than 1 ton per year in Korea in 2006. With regard to the benefit, the only public health benefit is included in the estimation. Based on the available foreign and domestic data, this study estimated that the economic values of public health benefits are in the range of 33.2~138.6 billion Korean won if only the savings of the National Health Expenditures are considered and it reaches 203.9~1,640.3 billion Korean won if the willingness to pay(WTP) for disease prevention is included. This study proved that the Korean REACH passed the cost/benefit criteria. The benefit-cost ratio of the Korean REACH, however, is estimated to be lower than its EU counterpart. Thus it is suggested that a rigorous study to reduce the costs to industry be required before the Korean government introduces the Korean REACH.

• Journal of the Korean housing association
• /
• v.18 no.6
• /
• pp.45-55
• /
• 2007

The study is based on a two-year research study titled 'A study on the Development of the Programs for Housing Policy to support Multi-family Housing Remodeling in Korea'. The primary purpose of this two-year study was to recommend governmental program initiatives for supporting multi-family housing remodeling activities in Korea. As a part of this research study, this article was written based on the results from the two surveys regarding multi-family housing remodeling in the United States and Korea, and a focus group with housing researchers affiliated to the Joint Center for Housing Studies. Major research findings are presented as follows: First, there have been various types of supportive programs for single- and multi-family housing remodeling in the United States. Those have focused on lower income families than middle income families. Compared with the programs in the United States, the apartment remodeling in Korea has been focusing on small population of the multi-family housing owners. Apartment remodeling in Korea needs supportive programs for rental housing remodeling and the housing remodeling for low-incomes. Second, there have been various types of remodeling activities made in multi-family housing properties in the United States. Size of remodeling project also varied. Their remodeling activities were based on the long-term repairing plans initiated by professional apartment management groups. For making our multi-family housing properties more sustainable, we also need to have the long-term repairing plans. Third, the apartment property remodeling has been regarded as a substitute of reconstruction of apartment properties. However, remodeling should be regarded as one of the most efficient ways to extend the life-cycle of apartment buildings. Thus, benefits and executive plans of apartment remodeling should be studied by a professional research center under our governmental responsibilities as done in the United States.