• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.253-257
• /
• 2020

The local information processing devices are devices that process information by converting voltage, current, and digital electric signals from legacy-type power facility into IEC 61850 based data. It acquires and processes the operation information of legacy-type power facility, performs control of power facility, and interlock function using internal logic. In particular, the time to convert data to process input and output information for a device is important because a number of protection relay input and output signals are handled by only one device. This paper introduces test methods and cases for measuring IEC 61850 communication function and input/output data conversion time of local information processing device.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.1
• /
• pp.58-68
• /
• 1998

A computer-controlled system for measuring dielectric hysteresis has been developed. This system consists of the wave generation par\, the high voltage amplifier part, the measurement part, the data acquisition part and the related controll circuits and is interfaced to P.C(personal computer). The applied voltage and its frequency are controlled by P.C . Since the measured datas can be saved in the RAM of P.C, the analysis and the graphics of the datas are very convenient. As a accuracy test, the capcitances of the commercial mica and styroll capacitors were measured by applying high voltage and the results were good agreement with the rating values. In the test of PZT ceramic sample, the typical D-E hysteresis loops were obtained by applying a single frequency voltage to the sample, and $\varepsilon-E$ and D-E hysteresis loops could be measured at the same time by applying a double frequency voltage to the sample.sample.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.259-261
• /
• 2005

기존 계통 안정도 평가와 제어의 방법은 전체 계통의 데이터를 취득한 후 평가하고 제어하는 방식으로 이루어져왔다. 하지만 이 방식은 계산 효율 측면과 통신상의 문제로 인해 신뢰성 측면에서 문제가 있다 더욱이 긴급한 상황에서 전압 불안정을 판단하기에는 많은 문제점이 발생한다. 이러한 문제를 해결하기 위하여 PMU(Phase Measurement Unit)와 같은 측정 장치에서 제공하는 지역정보를 이용한 VIP(테브난 임피던스와 부하 임피던스의 비교 분석하여 제어하는 방법)가 제시되었다. 본 논문에서는 VIP 알고리즘을 이용한 전압 불안정 현상 모의를 실시간 Digital Simulator (Hypersim)를 이용하여 계통을 분석하였다. Hypersim에서는 실제 계통과 유사한 모의를 통해 동적 모의가 가능케 하고 있다. 이것은 동안 실효치 데이터를 기반으로 하는 시간 모의에서 벗어나 실제 계통과 같이 순시치 데이터를 가지고 실제 상황처럼 모의 분석할 수 있는 것이다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1922-1923
• /
• 2007

현대 사회는 급속한 기술의 발전으로 인하여 공상과학영화에서나 볼 수 있었던 첨단 기술들이 실생활에서 구현되어지고 있다. 이러한 첨단기술 중 하나였던 뇌를 이용하여 각종 인터페이스를 제어하는 기술인 BCI 및 BMI 기술이 각광을 받고 있다. 이러한 기술들은 EEG 신호의 취득 및 분석 기술이 발전하면서 많은 발전을 이루었고 앞으로도 그 발전 가능성은 무궁무진하다. 따라서 본 연구에서는 이러한 기술의 실현을 위해 획득된 뇌파 신호를 분석하여 기계장치를 제어 할 수 있도록 데이터의 처리 방법을 제안하였다. 이러한 데이터 처리 방법으로는 Fir(Finite impulse response)필터링과 ICA알고리즘의 구현, FFT 분석을 통한 주파수별 전력분포 계산의 과정이 있다. 이러한 과정 등을 통해 피검자가 원하는 EEG 데이터를 얻을 수 있게 된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.580-582
• /
• 2015

본 프레임워크의 기본 방향은 [공공서비스를 제공하기 위한 재난안전 정보를 구현하기 위한 5단계로 피해지역에 설치된 정보수집 장치로부터 관측된 데이터와 현장에 대한 신고 정보를 취득함으로써 1단계 현장의 상황을 감시/관측하여 피해 현황을 인지할 수 있는 정보수집체계를 구축하고 수집된 데이터 중에서 오류 데이터를 정제하고 정보 모델링의 분류와 그룹핑을 통한 2단계 상황정보를 유형화한다. 그리고 유형화된 상황정보와 관련된 사건을 대상으로 일련의 규칙이나 상호관계를 파악하는 3단계 패턴 분석 과정을 통하여 4단계 공공서비스 매체별 특성을 고려하여 변환함으로써 대국민과 유관기관에게 재난안전 정보를 전달하는 5단계 공공서비스로 구현한다.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.221-230
• /
• 2016

As structures' long term performances and users' safety have been highlighted, a new maintenance technique using IT has drawn attention around the globe. Therefore, throughout the paper, by analyzing bridge's static and dynamic data using wireless measuring sensor, a "real time smart bridge monitoring system" has developed. Smart bridge monitoring system is consists of three main parts a sensor that can measure major members' movement, a wireless system that informs the data from the sensor, and the database system that analysis the data. In order to test the performance of the system, five different were placed on the Olympic Bridge, Seoul. The power system of the sensors was replaced by self-sustain solar energy system. In order to validate data from the real time smart bridge monitoring system, the data was collected for a week from both wireless system and the wired system and the two data were compared to see the relevance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.11
• /
• pp.2736-2744
• /
• 2013

In this paper, we present a Smart Water Treatment Plant using Zigbee USN devices and a real-time monitoring system in K-water Flow Meter Calibration Center Building. For verification, the data of vertical type WTP such as flow rate, pressure, water level and water temperature are obtained by the Zigbee USN devices, operating in 2.45 GHz band, and be wirelessly surveilled by the real-time monitoring system. The received data from the sensor is transmitted to the data processing device, and then the processed data can be monitored on a smart phone. Consequently, the pilot plant based on the low-cost and high-efficiency USN has been developed with the performance analysis for the communication network and remote monitoring system on mobile devices.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.15-22
• /
• 2008

A ship in a sea cruises with rolling, pitching, heaving etc because of environmental causes such as wind and wave. Those motions make crews or passengers feel inconvenience and they feel acceleration changes. Therefore, if lateral and vertical accelerations can be measured at a specific position in a ship, it can be known how discomfortable crews or passengers are. The motion monitoring system developed in this paper consists of measuring and communicating part including five accelerometers and gyro and a main computer which acquires measuring data and calculates motion indices. MSI(Motion Sickness Incidence) and MII(Motion Induced Interrupt) are calculated in real time using measured acceleration and angular rate. The validity of the developed system was confirmed through the real ship test of Hannara which is the school ship of Korea Maritime University.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.4
• /
• pp.504-510
• /
• 2019

Practical test items were analyzed to extend the existing scoring method for boat operator licenses to an electronic scoring method. We have attempted to digitize the method within the current practical test system scope and have developed an electronic scoring system using LiDAR sensors and WAVE communication. The results of the study are as follows; the first, the scoring data entered into the LiDAR and examiner score device on the boat were transferred from an integrated processing unit to a land control center through WAVE communication. The system was constructed and verified to store and manage examinee data. Second, when testing the meandering task, accurate distance measurement was achieved by using LiDAR instead of visually observing the stick (3 m), and an accurate distance was displayed through the examiner score device quickly. Finally, we confirmed that it is possible to smoothly transmit and process the WAVE communication used to transfer the score data acquired from the boat to the monitoring center at a high speed without loss.

• Journal of Advanced Navigation Technology
• /
• v.23 no.4
• /
• pp.316-321
• /
• 2019

In this paper, by applying the constant current principle we develop an impedance measurement system which can measure the high precision impedance of various electric materials by using microprocessor. This measurement system board has an interface device for acquiring digital data from an external device including an impedance measuring device, and system software is also developed by a firmware program executed on such an embedded board. It can measure the high precision impedance of a specific band with 1/32768 precision by using 15-bit ADC(analog to digital converter) and calculate it to the five digits to the right of the decimal point(fraction part). Data is transmitted through a USB interface of a general computer and a measuring device to manage digital data. An impedance measurement system equipped with a communication function capable of a more general and easy-to-use interface than other equipment is developed and verified.