• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.270-273
• /
• 2015

In shipbuilding and marine industry, engineering and design software solutions have upgraded from the original 2D schematic data based CAD system to a modern 3D drawing-based system. Due to the fact that the massive amount of data usage in real time and data volumes of various engineering models including graphic data have increased, several problems such as lack of server resources and improper handling of 3D drawings have been raised. Besides, increasing the number of session connections per server can cause deterioration of server performance. Recently, increasing the yard's sophisticated design capabilities highlighted the need to develop engineering and design system which would not only overcome the network performance issues, but would provide efficient collaborative design environment. This paper presents an overview of the framework for collaborative engineering design system based on the virtual application (Citrix XenApp 6.5)and acceleration hardware technology of 3D graphics (NVIDIA GRID K2 solution).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.981-985
• /
• 2005

In the NGN, QoS must be offered. We try to apply QoS technology and MPLS which makes them possible to support rapidly increasing traffic and franc engineering to maintain steady infra to the environment of MPLS traffic engineering. In this paper, we supplement the defect of the traditional MPLS traffic engineering and apply the technology of QoS. To construct far more steady infra, we suggest the way of its development and advanced protocol(ERSVP) compared to traditional protocol.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2021

This study proposes a systems engineering approach for the development of an advanced planning & scheduling (APS) system for a cosmetic case manufacturing factory. The APS system makes production plans and schedules based on the injection process, which consists of 27 plastic injection machines in parallel to control recommended inventory of products. The system uses machine operation/failure information and defective product/work-in-process tracking information to support intelligent scheduling. Furthermore, a genetic algorithm model is applied to handle the complexity of heuristic rules and machine/quality constraints in this process. As a result of the development, the recommended inventory compliance rate is improved by scheduling the 30-day production plan for 15 main products.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.477-480
• /
• 2007

국제표준규격인 ISO 10303(STEP), ISO 13584(PLIB), ISO 15926을 연구하고 해외건설 플랜트의 기자재 데이터를 입수하여 전문가를 통한 분석, 분류 및 국제표준규격(ISO 15926 RDL) 기반과 비교하여 분류체계 구축 및 속성정보 정의 작업을 수행하였다. 통합 및 분리가 필요한 기자재 클래스에 대해서는 통합, 분리 작업을 수행하였고 적용 가능한 속성정보가 있을 경우는 클래스별로 확장 적용하였다. 이에, 5단계 레벨, 637개의 분류체계가 구성되었고 개방형 구조의 XML으로 플랜트 기자재 정보를 구축하여 계층구조 분류트리 표현 및 해당 기자재의 제품에 대한 상세 정보를 나타내었다. 또한, 제품정보를 통합검색, 카테고리검색, 상세검색, 논리검색 기능으로 검색, 확인할 수 있고 표준 및 제품, 업체, 시스템을 관리하는 기자재 정보 관리 시스템을 구현하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.4
• /
• pp.772-776
• /
• 2005

To support abruptly increasing data traffic in these days, network management is needed. And also to maintain the steady infra, there is MPLS need which can support traffic engineering. It's necessary that MPLS doesn't only manage network to support recently booming data traffic, but has capacity to support traffic engineering to keep static infrastructure. Traffic engineering, method that a large-scale user shifts traffic to the beforehand designated routes that pass through specific nodes on network, is operation that is mapping traffic flow to the physical network topology. In this paper, we supplement the defect of the traditional RSVP traffic engineering and to construct far more steady infra, we suggest the way of its development of ERSVP signaling protocol.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.573-582
• /
• 2006

Black-box testing needs to prepare fitting test data, execute software, and examine the result. If we test software effectively, not only selecting test cases but also representing test cases are important. In static testing effectiveness of testing activities also depends on how to represent test cases and checklist to validate. This paper suggests a method for finding ineffective critical test cases and reengineering them. An experiment of reengineering digital set-top box software shows the process and results of checking effectiveness and conformance of current test cases and patching test cases. The result shows how much save the test time and improve test coverage by reengineering test cases. Methods of reuse and restructuring test cases are also studied to fit into embedded product-line software.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.105-108
• /
• 2005

To support abruptly increasing data traffic in these days. network management is needed. And also to maintain the steady infra, there is MPLS need which can support traffic engineering. It's necessary that MPLS doesn't only manage network to support recently booming data traffic, but has capacity to support traffic engineering to keep static infrastructure. Traffic engineering, method that a large-scale user shifts traffic to the beforehand designated routes that pass through specific nodes on network, is operation that is mapping traffic flow to the physical network topology. In this paper, we supplement the defect of the traditional RSVP traffic engineering and to construct far more steady infra, we suggest the way of its development of ERSVP signaling protocol.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.5
• /
• pp.351-365
• /
• 2021

Water treatment process simulator is the tool for predicting sequential changes of water quality in a train of unit processes. This predicts the changes through governing equations that represent physicochemical performance of each unit processes with an initial and boundary conditions. Since there is no operational data for the design of a water treatment facility, there is no choice but to predict the performance of the facility by assuming initial and boundary conditions in virtual reality. Therefore, a simulator that can be applied in the design stage of a water treatment facility has no choice but to be built as a numerical analysis model of a deductive technique. In this study, we had conducted basic research on governing equations, inter-process data-flow, and simulator algorithms for the development of simulators. Lastly, this study will contribute to design engineering tool development research in the future by establishing the water treatment theory so that it can be programmed in a virtual world and suggesting a method for digital transformation of the water treatment process.

• Journal of Powder Materials
• /
• v.27 no.6
• /
• pp.484-489
• /
• 2020

In this study, acoustic and viscosity data are collected in real time during the ball milling process and analyzed for correlation. After fast Fourier transformation (FFT) of the acoustic data, changes in the signals are observed as a function of the milling time. To analyze this quantitatively, the frequency band is divided into 1 kHz ranges to obtain an integral value. The integrated values in the 2-3 kHz range of the frequency band decrease linearly, confirming that they have a high correlation with changes in viscosity. The experiment is repeated four times to ensure the reproducibility of the data. The results of this study show that it is possible to estimate changes in slurry properties, such as viscosity and particle size, during the ball milling process using an acoustic signal.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.310-313
• /
• 2000

본 연구에서는 STEP 표준을 고려하지 않고 설계·개발된 기존의 PDM 시스템이 CAD 시스템에서 생성된 STEP 포맷의 제품 데이터를 활용할 수 있도록 하기 위한 데이터 변환 방법을 제시하고자 한다. 이를 위하여 AP203 응용 프로토콜의 분석과 함께 스키마 매핑을 위한 방법과 절차를 제시하였다 그리고, 이를 바탕으로 AP203 스키마와 ‘중소기업형 PDM 시스템'의 DB 스키마간에 매핑을 설계하였다. 또한, CAD 시스템에서 생성된 제품의 Assembly 구조를 PDM 시스템의 BOM 구조로 변환하기 위한 알고리즘을 함께 제시하였으며, 제품의 product structure를 중심으로 데이터 변환을 위한 STEP-to-DB 변환기 프로토타입을 개발하였다. 그리고, CAD 시스템에서 생성된 제품 데이터에 대한 STEP 스키마 구조와 AP203 응용 프로토콜 스키마와의 구조적 차이를 비교·분석함으로서 CAD 시스템에서 생성된 STEP 포맷의 제품 데이터 구조에 대해 엔지니어링 데이터로서의 구조를 갖도록 하기 위한 기초 자료를 제공하였다.