• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.859-865
• /
• 2018

A construction of infrastructures and base station on the moon could be undertaken by linking with the regions where construction materials and energy could be supplied on site. It is necessary to detect craters on the lunar surface and gather their topological information in advance, which forms permanent shaded regions (PSR) in which rich ice deposits might be available. In this study, an effective method for automatic detection of lunar craters on the moon surface is taken into consideration by employing a latest version of deep-learning algorithm. A training of a deep-learning algorithm is performed by involving the still images of 90000 taken from the LRO orbiter on operation by NASA and the label data involving position and size of partly craters shown in each image. the Faster RCNN algorithm, which is a latest version of deep-learning algorithms, is applied for a deep-learning training. The trained deep-learning code was used for automatic detection of craters which had not been trained. As results, it is shown that a lot of erroneous information for crater's positions and sizes labelled by NASA has been automatically revised and many other craters not labelled has been detected. Therefore, it could be possible to automatically produce regional maps of crater density and topological information on the moon which could be changed through time and should be highly valuable in engineering consideration for lunar construction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.25-39
• /
• 2018

The purpose of this study is to develop an efficient incident detection algorithm by applying machine learning, which is being widely used in the transport sector. As a first step, network of the target site was constructed with micro-simulation model. Secondly, data has been collected under various incident scenarios produced with combination of variables that are expected to affect the incident situation. And, detection results from both McMaster algorithm, a well known incident detection algorithm, and the Naive Bayes algorithm, developed in this study, were compared. As a result of comparison, Naive Bayes algorithm showed less negative effect and better detect rate (DR) than the McMaster algorithm. However, as DR increases, so did false alarm rate (FAR). Also, while McMaster algorithm detected in four cycles, Naive Bayes algorithm determine the situation with just one cycle, which increases DR but also seems to have increased FAR. Consequently it has been identified that the Naive Bayes algorithm has a great potential in traffic incident detection.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.513-527
• /
• 2018

The Tunnel Boring Machine(TBM) is relatively insufficient to cope with unpredicted changes in ground conditions as compared with Conventional Tunnelling Methods. Therefore, it is very important to predict the TBM performance at the design stage and estimate the advance rate for the calculation of the construction period. In this study, we added data to 211 TBM databases constructed in the previous study and analyzed the correlation between TBM outer diameter, maximum thrust, maximum cutterhead torque, cutterhead driving power and RPM, which are the main design and manufacturing specifications of TBM. As a result of the analysis from results obtained in the previous studies, it was confirmed that TBM outer diameter is very effective and important in estimating maximum thrust, maximum cutterhead torque, and cutterhead driving power of the TBM. As a result of comparing the regression equations derived from other TBM databases outside the country and the regression equation obtained from the present study results, the maximum thrust showed a similar tendency to each other, but the maximum torque estimated from the regression equation of this study was higher than that of other countries in the case of the large scale TBM.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.299-316
• /
• 2019

The purpose of this study was to analyze landslide susceptibility in the Pyeongchang area using Weight of Evidence (WOE) and Evidential Belief Function (EBF) as probability models and Artificial Neural Networks (ANN) as a machine learning model in a geographic information system (GIS). This study examined the widespread shallow landslides triggered by heavy rainfall during Typhoon Ewiniar in 2006, which caused serious property damage and significant loss of life. For the landslide susceptibility mapping, 3,955 landslide occurrences were detected using aerial photographs, and environmental spatial data such as terrain, geology, soil, forest, and land use were collected and constructed in a spatial database. Seventeen factors that could affect landsliding were extracted from the spatial database. All landslides were randomly separated into two datasets, a training set (50%) and validation set (50%), to establish and validate the EBF, WOE, and ANN models. According to the validation results of the area under the curve (AUC) method, the accuracy was 74.73%, 75.03%, and 70.87% for WOE, EBF, and ANN, respectively. The EBF model had the highest accuracy. However, all models had predictive accuracy exceeding 70%, the level that is effective for landslide susceptibility mapping. These models can be applied to predict landslide susceptibility in an area where landslides have not occurred previously based on the relationships between landslide and environmental factors. This susceptibility map can help reduce landslide risk, provide guidance for policy and land use development, and save time and expense for landslide hazard prevention. In the future, more generalized models should be developed by applying landslide susceptibility mapping in various areas.

• Journal of Digital Convergence
• /
• v.16 no.12
• /
• pp.635-640
• /
• 2018

The study conducted a Focus Group Interview (FGI) on college students to identify single-person households and Solitary Deaths of single-person households recognized by college students. This can be provided as basic data to address problems in single-person households and social problems such as future youth solitary death and will contribute to building a social safety net. This study conducted FGI to analyze data for five fourth graders majoring in social welfare. In the case of involuntary independent living, the high poverty and unemployment rate of single-person households was cited as the cause of economic instability, housing problems and emotional relationship formation. He said that he thinks about young loneliness because he has vague fears about what happens in the media and what can happen to them. As the number of young single-person households will inevitably increase in the coming months and economic difficulties are the biggest problem and the biggest cause of young solitude, institutional support is needed first, especially for housing costs.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1203-1213
• /
• 2018

In Arctic and Antarctic ocean, remote sensing is the most effective observation for environmental changes due to the inaccessibility of the regions. Even though satellite, UAV (Unmanned Aerial Vehical) are well known remote sensing platforms, and research vessel also used for automatic measurement on the regions, varied environment of Polar regions require time series and wide coverage of data. Especially, in high latitude, apply an optical satellite remote sensing is not easy due to low sun altitude. In this paper, we introduce an operation of hyper-spectrometer (HyperSAS/Satlantic inc.) which is mounted on Ice Breaker Research Vessel ARAON of Korea Polar Research Institute since 2010, to acquire an above water reflectance atomatically through every research cruise on Arctic and Antarctic ocean and transit both regions. In addition to, auxiliary data for the remotely acquired data, in situ water sampling were also obtained. The above water reflectance and in situ water sampling data are continuously acquired since 2010 will contribute to improve an Ocean Color algorithm in the high latitude and help to understand ocean reflectances over from high latitude through low latitude. Preliminary result from above water reflectance showed characteristics of Arctic ocean and Antarctic Ocean and used to develop algorithms for estimating various ocean factors such as chlorophyll and suspended sediment.

• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.8
• /
• pp.317-322
• /
• 2019

Programming judge systems for programming training support are typically built on the Web, where the examiners uploads a programming problem, which the student reads and submits an answer to the problem. The judge system executes the submitted answer of source code to provide feedback such as pass, failure, and error messages. Students who receive the feedback except for the pass continues debugging the source code until they are judged to pass. We developed an online judge system to support programming training and analyzed answers submitted by the students and found that many of the students who were not judged to pass that test did not know exactly where they were wrong but continued to solve the problem. The current judge system generally feeds runtime error messages back to students. However, with only runtime error message, it is difficult for student who train to find the wrong part of the answer. Therefore, in this paper, we propose a system that provides the feedback of programming failure by analyzing the control flow of the test cases used in the source code submitted by the student. The proposed system helps students find the wrong parts more quickly by feeding back the paths where faults in the control flow may exist. In addition, we show that this system is applicable to the answer source code that the actual student submitted.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.256-259
• /
• 2016

The growth of mobile devices in Internet of Things (IoT) leads to a number of intelligent buildings related IoT applications. For instance, home automation controlling system uses client system such web apps on smartphone or web service to access the home server by sending control commands. The home server receives the command, then controls for instance the light system. The gateway based RESTful technology responsible for handling clients' requests attests an internet latency in case a large number of clients' requests submit toward the gateway increases. In this paper, we propose the design tasks of the IoT gateway for handling concurrency events. In the procedure of designing tasks, concurrency is best understood by employing multiple levels of abstraction. The way that is eminently to accomplish concurrency is to build an object-oriented environment with support for messages passing between concurrent objects. We also investigate the performance of event-driven architecture for building IoT gateway using node.js on one side and communication protocol based message-oriented middleware known as XMPP to handle communications of intelligent building control devices connected to the gateway through a centralized hub. The Node.JS is 40% faster than the traditional web server side features thread-based approach. The use of Node.js server-side handles a large number of clients' requests, then therefore, reduces delay in performing predefined actions automatically in intelligent building IoT environment.

• Journal of Cadastre & Land InformatiX
• /
• v.49 no.1
• /
• pp.103-112
• /
• 2019

Extraction of region of interest for satellite image classification is one of the important techniques for efficient management of the national land space. However, recent studies on satellite image classification often depend on the information of the selected image in selecting the region of interest. This study propose an effective method of selecting the area of interest using the continuous digital topographic map constructed from high resolution images. The spatial information used in this research is based on the digital topographic map from 2013 to 2017 provided by the National Geographical Information Institute and the 2015 Sejong City land cover map provided by the Ministry of Environment. To verify the accuracy of the extracted area of interest, KOMPSAT-3A satellite images were used which taken on October 28, 2018 and July 7, 2018. The baseline samples for 2015 were extracted using the unchanged area of the continuous digital topographic map for 2013-2015 and the land cover map for 2015, and also extracted the baseline samples in 2018 using the unchanged area of the continuous digital topographic map for 2015-2017 and the land cover map for 2015. The redundant areas that occurred when merging continuous digital topographic maps and land cover maps were removed to prevent confusion of data. Finally, the checkpoints are generated within the region of interest, and the accuracy of the region of interest extracted from the K3A satellite images and the error matrix in 2015 and 2018 is shown, and the accuracy is approximately 93% and 72%, respectively. The accuracy of the region of interest can be used as a region of interest, and the misclassified region can be used as a reference for change detection.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.300-312
• /
• 2019

The purpose of this study is to develop an astronomical observing education program that enables high school students to inquire the distance of astronomical bodies based on the research methods (observing open clusters and exploring collected big data) using small telescopes and DSLR cameras. After analyzing the 2015 revised science curriculum, we developed science club activity materials and teacher-student learning contents suitable for high school earth science education. A panel of six teachers and researchers of earth science education and astronomy, participated in developing the educational materials. The validity of the program was verified through establishing the agreement among the panels after in-depth discussions and clarifications. The program, developed with 10 lessons in total, showed high satisfactory content validity (CVI, .89) and conformity of school class (Likert's 5 point scales, 4.17). The feedback of the panels and the Delphi analysis continued to improve the quality of the program. The pilot testing result with high school students (N=9) showed that the students' satisfaction rate was high as 4.48. Using the astronomical observational education program of this study is expected to contribute in improving the convergence educational activity, interest, curiosity, and inquiry ability of students in the universe and the astronomical bodies.