• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.355-361
• /
• 2014

The aim of the present study was to evaluate a relative emission of image plate (IP) in computed radiography (CR) system by using relative sensitivity in film/screen methods. The characteristic curve was obtained by using the uniform aluminum 11-step wedge penetrometer. X-ray exposure factors on radiographic digital image were 50 kVp, 10 mAs. We adjusted zero of all parameter of algorithms (MUSICA) so proximate to raw data and applied to 200 of exposure class. Modeling on relative emission of IP are used IP without fading time and IP after 4 hours, 8 hours, 12 hours, 24 hours in the respective storage after X-ray exposure. The results of this study showed that the sensitivity point density at the measuring of relative sensitivity in CR was suited pixel values of the 2000 easy to relatively measure the characteristic curve and when relative sensitivity is decreased, the amount of light emitted from the image signal for generating was also decreased. In conclusion, the proposed method of measurement of relative sensitivity can be utilized to evaluate the quantity of relative emission of IP in CR system.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.243-251
• /
• 2004

This study was to quantitative analysis compare to dynamic characteristic change of the regional cerebral blood volume (rCBV) after development of cerebral fat embolism in cats using perfusion MR Imaging. Forty-four adult rats were used. Triolein (n = 15), oleic acid (n = 9) and linoleic acid (n = 11) were injected into the internal carotid artery using microcatheter through the transfemoral approach. Polyvinyl alcohol (Ivalon) (n = 9) was injected as a control group. Perfusion MR images were obtained at 30 minutes and 2 hours after embolization, based on T2 and diffusion-weighted images. The data was time-to-signal intensity curve and ΔR$_2$＊ curve were obtained continuously with the aid of home-maid image proc in.leased significantly at 2 hours compared with those of 30 minutes (P＜0.005). In conclusion, cerebral blood flow decreased in cerebral fat embolism immediately after embolization and recovered remarkably in time course. It is thought that clinically informations to dynamic characteristic change of the cerebral hemodynamics to the early finding in cerebral infarction by DWI and PWI

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.17-26
• /
• 2011

We have developed a wearable device that can convert sensor data into real-time step counts. Sensor data on gait were acquired using a triaxial accelerometer. A test was performed according to a test protocol for different walking speeds, e.g., slow walking, walking, fast walking, slow running, running, and fast running. Each test was carried out for 36 min on a treadmill with the participant wearing an Actical device, and the device developed in this study. The signal vector magnitude (SVM) was used to process the X, Y, and Z values output by the triaxial accelerometer into one representative value. In addition, for accurate step-count detection, we used three algorithms: an heuristic algorithm (HA), the adaptive threshold algorithm (ATA), and the adaptive locking period algorithm (ALPA). The recognition rate of our algorithm was 97.34% better than that of the Actical device(91.74%) by 5.6%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.344-346
• /
• 2018

Air pollution has become a social issue. Particularly, interest in fine dust is increasing. Various kinds of sensors are being used to measure fine dust. The most commonly used infrared detection dust sensors operate by sensing the diffraction of light through an infrared receiver and sensing the light reflected by the dust in the air. However, this method has a drawback in which accurate data analysis is difficult due to deviation caused by the noise during measurement. In order to overcome such drawbacks, in this thesis, a low pass filter algorithm of FIR(Finite Impulse Response) filter was designed and implemented.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.39-48
• /
• 2012

In case a measurement output of gyro sensor is an accumulated angle counts, it is usually provided as a binary bit counter which is allowed to roll-over at its maximum or minimum value. And it is a well known fact that the roll-over behavior restricts the measurement range of the processed sensor output below the actual measurable range of sensor hardware itself. In this study, a conventional sensor data processing method for a gyro with an accumulated angle output is introduced. And also, an improved method which can extend the processed output range over the conventional one is proposed. It is also derived that the increased range depends on the variation speed of a input signal. Finally, the derived equations and the performance of the proposed algorithm are verified using a computer simulation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.279-283
• /
• 2004

In general, triangular shape filters are used in the filter bank when we extract MFCC feature parameters from the spectrum of the speech signal. A different approach, which uses specific filter shapes in the filter bank that are optimized to the spectrum of training speech data, is proposed by Lee et al. to improve the recognition rate. A principal component analysis method is used to get the optimized filter coefficients. Using a large amount of 4-digit telephone speech database, in this paper, we get the MFCCs based on the PCA-optimized filter bank and compare the recognition performance with conventional MFCCs and direct weighted filter bank based MFCCs. Experimental results have shown that the MFCC based on the PCA-optimized filter bank give slight improvement in recognition rate compared to the conventional MFCCs but fail to achieve better performance than the MFCCs based on the direct weighted filter bank analysis. Experimental results are discussed with our findings.

• The Journal of Information Technology
• /
• v.3 no.2
• /
• pp.39-47
• /
• 2000

Among the compression methods of moving picture information, a motion estimation method is used to remove time-repeating. The Block Matching Algorithm in motion estimation methods is the commonest one. In recent days, it is required the more advanced high quality in many image processing fields, for example HDTV, etc. Therefore, we have to accomplish not by means of Partial Search Algorithm, but by means of Full Search Algorithm in Block Matching Algorithm. In this paper, it is suggested a structure that reduce total calculation quantity and size, because the structure using Bit Plane select and use only 3bit of 8bit luminance signal.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.238-244
• /
• 2013

In energy dispersive X-ray fluorescence analysis, the removal of the continuum on which the X-ray spectrum is superimposed is one of the most important processes, since it has a strong influence on the analysis result. The existing methods which have been used for it usually require tight constraints or prior information on the continuum. In this paper, an efficient background correction method is proposed for Energy Dispersive X-ray fluorescence (EDXRF) spectra. The proposed method has two steps of background modeling and background correction. It is based on the basic concept which differentiates background areas from the peak areas in a spectrum and the SNIP algorithm, one of the popular methods for background removal, is used to enhance the performance. After detecting some points which belong to the background from a spectrum, its background is modeled by a curve fitting method based on them. And then the obtained background model is subtracted from the raw spectrum. The method has been shown to give better results than some of traditional methods, while working under relatively weak constraints or prior information.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.663-670
• /
• 2001

This paper proposes a new power reduction method for 2D FIR (Finite Impulse Response) filters. We exploited the spatial redundancy of image data in order to reduce power dissipation in multiplication of FIR filters. Since the higher bits of input pixels are hardly changed, the redundant multiplication of higher bits is avoided by separating multiplication into higher and lower parts. The calculated values of higher bits are stored in memory cells, cache such that they can be reused when a cache hit occurs. Therefore, we can reduce power in 2D FIR Filter modules about 15% by using the proposed separated multiplication Technique (SMT).

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.175-183
• /
• 2011

Performance of digital video watermarking is an assessment that hides a lot of information in digital videos. Therefore, it is required to find a way that enables to store lots of bits of data into a high quality video of the frequency area of digital contents. Hence, this paper designs a watermarking system improving security with an enhancing watermarking based on invisible watermarking and embedding an watermarking on LH and HL subband and its subband by transforming wavelet after the extraction of luminance component from the frames of video by compromising robustness and invisible of watermarking elements. The performance analysis of security of watermarking is carried out with a statistic method, and makes an assessment of robustness against variety of attacks to invisible watermarking. We can verify the security of watermarking against variety of attacks by testing robustness and invisible through carrying out general signal processing like noise addition, lossy compression, and Low-Pass filtering.