• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.177-182
• /
• 2003

본 연구에서는 회전익 상태에서 이/착륙, 저속 전진비행을 하고, 고정익 상태에서 고속 전진비행을 하는 스마트 무인기 추진시스템을 모델링하고 회전익 모드, 고정익 상태의 고속 비행모드, 팁 제트 노즐과 주 엔진 노즐을 모두 이용하는 혼합모드에 대해 정상상태 성능해석을 수행하였다. 성능해석 결과는 각 비행모드에서 덕트의 손실로 인한 추진 시스템의 운용영역이 제한되는 결과를 보였으며, 비행 마하수 변화에 대한 결과와 비교해 고도의 변화에 대한 해석결과가 더 넓은 영역에서 비행영역을 제한함을 알 수 있었다.

• 에너지공학
• /
• 제11권2호
• /
• pp.130-135
• /
• 2002

바이패스 공조시스템은 냉각코일과 가열코일의 공기통과여부에 따라 크게 외기바이패스, 혼합공기 바이패스와 순환공기 바이패스 공조시스템으로 구분할 수 있다. 이 중에서 순환공기 바이패스 공조시스템은 다른 두 방식과 달리 공조되지 않은 외기가 시스템 내부로 직접 유입되지 않으므로 실내온습도 조절면에서 가장 효율적인 시스템이다. 먼저, 수치계산을 통하여 부하변동에 따른 순환공기 바이패스 공조시스템과 단일덕트 정풍량공조시스템의 실내온습도 구현능력을 비교, 평가하였다. 또한 제안 시스템의 성능분석을 위해 실물실험동을 건립하여 그 실험결과를 수치계산결과와 비교하였다. 실험을 통하여 실현열비가 0.7(현열부하만 변동)인 경우, 실내 최대현열부하에 대한 부분부하시의 실내 현열부하의 비(DSL; Design Sensible Load)가 70% 이내에서는 수치계산, simulator 실험 모두 실내상대습도는 ASHRAE STANDARD 62-1999에서 지정하는 60% 이하로 유지됨을 알 수 있었다. 결론적으로, 바이패스 공조시스템은 실내의 온습도를 정해진 범위의 부하변동내에서는 바이패스 댐퍼의 조작만으로 쾌적한 상태로 유지시킬 수 있으며, 환기회수가 많은 장손의 경우, 순환공기 바이패스에 의해 양질의 실내공기질(IAQ; Indoor Air qualify)을 확보할 수 있다.

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.119-125
• /
• 2020

In this paper, we used Helmholtz solver based on 3D finite element method to quantitatively analyze the effects of change of gain, time delay and time delay spread, which are the main variables of flame transfer function, on combustion instability in gas turbine combustor. The effects of the variable of flame transfer function on the frequency and growth rate, which are the main results of combustion instability, were analyzed by applying the conventional heat release fluctuation model and modified one considering the time spread. The analysis results showed that the change of gain and time delay in the same resonance mode affected the frequency of the given resonance modes as well as growth rate of the feedback instability, however, the effect of time delay spread was not relatively remarkable, compared with the dominant effect of time delay.

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.1-10
• /
• 1997

In this paper, an improved lower bound on the burst-error correcting capability of th ecyclic product code is presented and through the analysis of this new bound clustered cyclic product (CCP abbr.)code is proposed. The CCP code, to improve the burst-error correcting capability, combines the idea of clustering and the transmission method of cyclic product code. That is, a cluster which is defined in this paper as a group of consecutive code symbols is employed as a new transmission unit to the code array transmission of cyclic product code. the burst-error correcting capability of the CCP code is improved without a loss in the random-error correcting capability and performance comparison in the digital video camera records (DVCR) system shows the superiority of the proposed CCP code over conventional product codes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권3호
• /
• pp.50-59
• /
• 1993

Usually ship is propelled by the conventional propeller. When the conventional propeller is used for ship's propulsion, reduction of propeller noise is big issue in some special vessel. In order to reduce the acoustic noise of the propeller, novel propulsion system named as MHD propulsion system has been studied among researchers. In this paper, thruster characteristic analysis and system analysis of MHD propulsion system have been carried out. Firstly basic experimental apparatus is designed, fabricated and installed and test is carried out. Test results are compared with numerical analysis. It is confirmed that test results agreed with numerical results satisfactorily.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.123-126
• /
• 2003

This paper describes the development procedure for Tail-Fan system which has the role of anti-torque and yaw control in helicopter. A detailed design of Tail-Fan system was done and structural analysis also was done. After finishing detailed design, Detailed drawings were generated for manufacture. Through detailed design and manufacture, required techniques were achieved for helicopter development. After validation through performance and stability test, acquired techniques will be applied to development of Korea Multi-role Helicopter(KMH) which will be launched

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.831-832
• /
• 2015

K-water에서는 대청댐 하류의 용수를 취수하여 대청광역 계통에 1일 98만㎥을 공급할수 있는 현도취수장을 운영하고 있다. 취수장에는 고압전동기 10대가 운영되고 있으며, 장시간 연속운전 및 하절기 주위온도 상승 등으로 권선온도가 상승되어 설비의 안전성 문제가 제기되어 왔다. 취수펌프동 실내온도 및 고압전동기 권선온도 저감을 위해 펌프동 배기시스템 운영시간 변경 및 고압전동기 냉각 흡기덕트 설치 등의 개선 노력으로 권선온도 저감은 물론 에너지절감 및 기기의 수명연장 등 설비 운영의 안전성을 확보한 연구결과이다.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.56-62
• /
• 2010

In this paper, a recurrent cerebellar modulation articulation control (RCMAC) has been developed for improvement of noise attenuation performance in active noise control system. For the narrow band noise, a filter-x least mean square (FXLMS) method has bee frequently employed as an algorithm for active noise control (ANC) and has a partial satisfactory noise attenuation performance. However, noise attenuation performance of an ANC system with FXLMS method is poor for broad band noise and nonlinear path since it has linear filtering structure. Thus, an ANC system using RCMAC is proposed to improve this problem. Some simulations in duct system using harmonic motor noise and KTX cabin noise as a noise source were executed. It is shown that satisfactory noise attenuation performance can be obtained.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2003년도 추계공동학술대회
• /
• pp.707-720
• /
• 2003

Product factory is a real-time financial product design system for the Internet customers. The hybrid product is a product taking combined characteristics of two different products. Hybrid product factory is a product factory that designs hybrid products from two different products based on both business rules and customer requirements. Though the importance of product factory is emphasized in the industry, there has not been much research peformed regarding product factory. In this research, we developed a product factory system that designs hybrid products. To design a hybrid product, it is necessary to have a method to combine attributes and values of two different products, and a method to control the combining operations to properly reflect business requirements. In this research, we developed four different combining operators and business rule representations. In addition, to prove the effectiveness of this methods, we implemented a prototypical system and demonstrated on cases regarding financial loan products.

• 한국유체기계학회 논문집
• /
• 제14권4호
• /
• pp.45-51
• /
• 2011

The kimchi refrigerator is the electronic home appliance which is used for the maturing and a custody of the kimchi. In this paper, performance improvement of fan and duct system for kimchi refrigerator has been studied by using a commercial CFD code. In order to achieve a improved fan performance, three-dimensional computational fluid dynamics and the Design of Experiments method have been applied. Additionally, to know the optimized duct inlet shape with the optimized fan, the overall performances were calculated with various duct inlet shapes. The final fan and duct system for kimchi refrigerator showed improved performance in efficiency and total head compared with the existing model.