• Journal of Powder Materials
• /
• v.21 no.3
• /
• pp.202-206
• /
• 2014

Leaching of MOCVD dust in the LED industry is an essential stage for hydro-metallurgical recovery of pure Ga and In. To recover Ga and In, the leaching behavior of MOCVD scrap of an LED, which contains significant amounts of Ga, In, Al and Fe in various phases, has been investigated. The leaching process must be performed effectively to maximize recovery of Ga and In metals using the most efficient lixiviant. Crystalline structure and metallic composition of the raw MOCVD dust were analyzed prior to digestion. Subsequently, various mineral acids were tested to comprehensively study and optimize the leaching parameters such as acidity, pulp density, temperature and time. The most effective leaching of Ga and In was observed for a boiling 4 M HCl solution vigorously stirred at 400 rpm. Phase transformation of GaN into gallium oxide by heat treatment also improved the leaching efficiency of Ga. Subsequently high purity Ga and In can be recovered by series of hydro processes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.35-38
• /
• 2006

This study investigated fundamental properties of lightweight foamed concrete using cement kiln dust (CKD) and both fly ash(FA) and stability agent. Test results showed that concrete incorporating more amounts of admixture decreased slump flow and it caused increase of superplasiticizer in order to secure the fluidity performance. In addition concrete adding stability agent showed stable flow state, resisting segregation of materials and decreasing bleeding capacity. Sinking depth of concrete incorporating 20% of CKD and adding 0.002% of stability agent was indicated at 0mm. For the properties of hardened concrete. compressive strength of concrete incorporating CKD declined due to a lower appearance density, compared with other specimens. The difference of that was not very significant and the value of ail specimen was higher than KS range. Moreover strength of concrete incorporating CKD was even higher at curing temperature $5^{\circ}C$. Tensile strength ratio of concrete incorporating CKD was indicated between 0.50 to 0.59, which is higher value than control concrete. Heat conductivity of concrete incorporating FA was under the KS range while concrete incorporating 20% of CKD was satisfied in KS. Concrete adding stability agent improved insulation performance due to the lower heat conductivity. In conclusion, it is possible that concrete incorporating 20% of CKD and adding 0.002% of stability agent can secure high quality of lightweight foamed concrete.

• Korean Journal of Agricultural Science
• /
• v.40 no.3
• /
• pp.203-208
• /
• 2013

Differences in the filling amount of substrates in container can influence severely on the soil physical properties and crop growth. This research was conducted to secure the fundamental informations related to the changes in soil physical properties as influenced by the filling amount of coir dust-based substrates in container. For the experiment, three substrates were formulated by blending coir dust (CD) with expanded rice hull (CD+ERH, 8:2, v/v), carbonized rice hull (CD+CRH, 6:4, v/v) or ground and aged pine bark (CD+GAPB, 8:2, v/v). Based on the optimum bulk density, the amount of substrates filled in 347.5mL aluminum cylinder were adjusted to 90, 100, 110, 120, and 130%. Then the changes in total porosity (TP), container capacity (CC), and air-filled porosity (AFP) by various filling amounts were measured. The TP decreased linearly in CD+ERH and CD+GAPB and quadratically in CD+CRH as the filling amounts of the media increased from 90% to 130%. The CC in CD+ERH and CD+GAPB media increased as the filling amount increased from 90% to 120%, then decreased in 130%, showing quadratic change. The CC in CD+CRH was the highest in 90% filling amount and decreased gradually as the filling amount of root medea increased. The AFPs in CD+ERH and CD+GAPB media were 38 and 37%, respectively in 90% filling amount and they decreased drastically until 110% filling, then gradually in 120 and 130% filling amount showing the quadratic changes. The AFP of CD+CRH at 90% filling amount was 22% and it decreased as the filling amount increased until 130%, showing linear change. These results indicate that the increase in filling amount of substrates influenced more severely the AFP than CC, and careful consideration on container filling is required to provide a better root condition thus maximize crop growth.

• Resources Recycling
• /
• v.10 no.4
• /
• pp.34-41
• /
• 2001

A research was performed to evaluate a use of shredder residue to currently dispose of at landfills. Laboratory analyses were conducted to determine especially the fuel characteristics of shredder residue. For this aim, shredder residue was classified by the particle size as well as by the type of material and the content of Cl, S, ash, and calorific value were determined. Due to the chlorinated plastic content of shredder residue, mean concentration of Cl was found to exceed 4wt% except one sample while that of S was ranged from 0.25 to 0.39 wt%. As far as calorific value was concemed, plastic was observed to be more than 10,000 kcal/kg while wood/paper and fiber accounted for approximately 4,000 kcal/kg. Shredder residue was found to contain varying trace amounts of metal elements, including Fe of 6∼8.5 wt%. Hg and Cr(VI) were not detected, however, while Cd was contained as small as 0.0004-0.0009 wt%.

• Resources Recycling
• /
• v.30 no.1
• /
• pp.35-43
• /
• 2021

In this study, Na2SO4 and KCl reagents were used to synthesize K2SO4 as a basic study for recycling byproducts generated during the manufacture of steel and cement. The mole ratio of Na2SO4 to KCl, the saturation of the solution, and the stirring temperature were controlled to derive the optimal manufacturing conditions. The microstructure and crystallinity of the materials prepared were evaluated using scanning electron microscopy and X-ray diffraction analysis. Pure K2SO4 was obtained when the mole ratio of Na2SO4 to KCl was 1:6-18, the saturation of the solution was less than 160%, and the stirring temperature was 20℃, 50℃. The optimal manufacturing conditions to maximize the crystallinity and yield of K2SO4 while minimizing the energy consumption were 1:6 mole ratio of Na2SO4 to KCl, 140% saturation of the solution, and 20℃ stirring temperature.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.140-146
• /
• 2018

This research was conducted to determine the influence of incorporation levels of sulfur into a coir dust+pine bark medium (1:1, v/v) on the changes in the bicarbonate ($HCO_3{^-}$) concentrations and pH of soil solution, crop growth, and nutrient uptake of 'Ssanta' strawberry. In the preparing of the mixed medium, sulfur powder was added with the rate of 0 (control), 0.23, 0.45, 0.90, and $1.80g{\cdot}L^{-1}$ and Hoagland nutrient solution containing $240mg{\cdot}L^{-1}$ $HCO_3{^-}$ was supplied during the crop cultivation. The growth measurements and tissue analysis for the determination of nutrient contents were carried out 140 days after solution application and the soil solution analysis was performed every two weeks. As the level of sulfur was elevated, the overall growth of mother plants became better showing that the growth indexes except chlorophyll contents were the lowest in control treatment but the statistical differences were not found among the three treatments of $0.45g{\cdot}L^{-1}$ or higher sulfur. The higher the levels of sulfur incorporation, the higher the occurrence of runners and the growth of daughter plants. The length of the runners and the number of daughter plants occurred per mother plants were higher in the treatments of 0.90 and $1.80g{\cdot}L^{-1}$ than the three treatments of 0, 0.23, and $0.45g{\cdot}L^{-1}$, but the statistical differences were not observed between the 0.90 and $1.80g{\cdot}L^{-1}$ treatments. The rose of pH and $HCO_3{^-}$ concentrations in soil solution of root media continued all the cropping period, but those decreased slightly in the treatments of $0.90g{\cdot}L^{-1}$ or higher. The soil solution concentrations of $K^+$ and $PO_4{^3-}$ in the treatments of 0.90 and $1.80g{\cdot}L^{-1}$ was lower than those in other treatments and the statistical differences in the $Ca^{2+}$ and $Mg^{2+}$ concentrations were not observed among all treatments. The nutrient contents in tissue analyzed in this experiment were the lowest in the control treatments and those increased as incorporation rates of sulfur were elevated. Above results indicated that when 'Ssanta' strawberry is grown hydroponically and the root medium is coir dust and the pine bark (5:5, v/v) mix, the sulfur incorporation rate as pre-planting fertilizer has to be higher than $0.9g{\cdot}L^{-1}$ root medium to reduce the $HCO_3{^-}$ injury.

• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.658-667
• /
• 2015

This research was conducted to investigate the influence of various levels of fused superphosphate as pre-planting fertilizer on the growth of red-leaf lettuce and changes in the chemical properties of the soil solution in three root media, namely coir-dust plus expanded rice hull (8:2, v/v; CD+ERH), carbonized rice hull (6:4; CD+CRH), or ground and aged pine bark (8:2; CD+GAPB). The amounts of fused superphosphate (FSP) incorporated into the three root media during formulation were controlled from 0 to $6.0g{\cdot}L^{-1}$ in $1.5g{\cdot}L^{-1}$ increments. The root media containing fertilizers were packed into 300 mL plastic pots and seedlings of red-leaf lettuce at the 3rd leaf stage were transplanted. After transplanting, the crops were fed with a solution of neutral fertilizer ($100mg{\cdot}L^{-1}$). The growth of red-leaf lettuce was investigated 5 weeks after transplanting and soil solutions were extracted and analyzed every week for pH, EC, and concentrations of macro-nutrients. The elevation of application rates of FSP in the three root media resulted in better growth, and the crops grown in CD+ERH and CD+GRPB had greater fresh and dry weights than those in CD+CRH when compared among the treatments of equal amounts of FSP. The pH and $PO_4{^{-3}}$ concentrations in the soil solution of CD+CRH at 3 weeks after transplant were in the ranges of 4.0 to 4.8 and 20 to $100mg{\cdot}L^{-1}$, respectively. These were lower pH and higher $PO_4{^{-3}}$ concentrations than those in CD+ERH and CD+GAPB. The $K^+$ concentrations were higher in CD+CRH than those in the other two root media, and the elevation of FSP application rates resulted in higher $Ca^{+2}$, $Mg^{+2}$ and $SO_4{^{-2}}$ concentrations in soil solution of the three root media. The $NO_3$-N concentrations in soil solution rose continuously during crop cultivation, implying that the leaching percentage was elevated. The soil solution EC varied, showing the same tendencies as the $NO_3$-N concentrations. The above results indicated that the CD+ERH and CD+GRPB media performed better than CD+CRH, and optimum application rates of FSP in the three root media were 4.5 to $6.0g{\cdot}L^{-1}$ for pot cultivation of red-leaf lettuce.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1088-1095
• /
• 2019

The CKD extract is wastewater from which KCl in CKD has been removed to reuse CKD as a cement raw material, and tried to reuse no extracts due to problems such as wastewater treatment facility expansion. As a result of removing KCl by the ion exchange method, the pH of the extract after ion exchange decreased from 12.7 to less than pH 2, and it was confirmed that H⁺ of the cation exchange resin was dissolved in the extract through ion exchange. In addition, the selectivity of the ion exchange was removed in the order of Ca²⁺, K⁺, it was determined that the increase in the contact time to remove the K⁺ ions. The batch system had a contact time of 6 times or more, compared to the continuous system, and showed 4 times of K⁺ removal efficiency and 7 times of Cl^- removal efficiency. It was showed by analyzing the pH of the extract that more H⁺ of the cation exchange resin was extracted than OH^- of anion exchange resin as the pH of the extract was changed.

• Journal of agriculture & life science
• /
• v.44 no.5
• /
• pp.9-13
• /
• 2010

This study was conducted to identify the possibility of utilization of coconut substrates for nutrition culture of cut-chrysanthemum. The materials of substrate were composed of dust, fiber, and chip from coco-nut fruit. Dust was used in dust (100%), and dust+chip and +fiber were used in the ratio of 7:3 (v:v), respectively, as coconut mixture substrate. Perlite was used as control in this experiment. Water content in the perlite medium was lower than in dust substrate. The pH of all coconut substrates ranged from 6.5 to 5.8, whereas perlite substrate ranged from 7.3 to 6.7. While, EC of dust substrates shown to be highest but perlite substrate was lowest. The growth of chrysanthemum such as stem length, leaf area, and dry matter showed better results in coconut substrates than that of perlite and dust. However, there was no differences days to in flowering among treatments.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.34-41
• /
• 2022

Smelting reduction of spent lithium-ion batteries results in metallic alloys, slag, and dust containing Li(I). Precipitation of Li₂CO₃ was performed using the synthetic leachate of the dust. Herein, the effects of the precipitant and addition of non-aqueous solvents on the precipitation of Li(I) were investigated. Na₂CO₃ was a more effective precipitating agent than (NH₄)₂CO₃ owing to the hydrolysis reaction of dissolved ammonium and carbonate. The addition of acetone or ethanol improved the Li(I) precipitation percentage for both the precipitants. When using (NH₄)₂CO₃, the Li(I) precipitation percentage increased at a solution pH of 12. Under the same conditions, the Li(I) precipitation percentage using Na₂CO₃ was much higher than that using (NH₄)₂CO₃.