• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.2
• /
• pp.103-110
• /
• 2016

Fine wires made from platinum have been used as sensors to evaluate the convection performance of nanofluids. However, the wire sensor is difficult to handle due to its fragility. Additionally, an unrealistic convective heat transfer coefficient (h) is obtained if a rigorous calibration process combined with precision equipment is not used for measurement. This paper proposes a new evaluation apparatus for h of nanofluids that uses a thermistor sensor instead of the platinum wire. The working principles are also explained in detail. Validation experiments for pure engine oil comparing h from the two sensors confirmed numerous practical benefits of the thermistor. The proposed system can be used as a useful tool to justify the adoption of developed nanofluids.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10c
• /
• pp.616-618
• /
• 2002

최근 몇 년 동안 이루어진 네트웍 및 인터넷 시장의 발전과 더불어 빈번히 발생하는 시스템에 대한 침입으로 이를 방어하기 위한 여러 도구들이 개발되어왔다. 이러한 도구들 중 침입탐지시스템은 시스템 방어에 핵심적인 역할을 하는데, 현재까지 이를 평가하기 위한 자동화된 온라인 평가도구는 없는 실정이다. 보안관련 시장이 발달한 미국에서는 DARPA의 지원아래 관련된 연구가 진행되어 1998년부터 2000년까지 대규모의 침입탐지시스템 평가가 이루어졌으나, 이때의 평가들은 당시의 침입 수준만을 고려한 것으로 새로운 침입 환경에 대한 확장은 용이하지 않기 때문에, 급속도로 증가하는 침입 기술에 대응하기 위한 새로운 방법이 필요하다. 본 논문에서는 기존 침입코드를 이용하여 새로운 침입을 만들어 내어 침입탐지 평가도구에 적용할 수 있는 모듈 위치변환과 더미코드 삽입을 제안한다. 모듈 위치변환은 알려진 u2r코드를 모듈 단위로 나누고 나뉘어진 모듈의 위치 변환을 통해 새로운 침입을 만들어낸다. 또한 더미코드 삽입은 침입코드의 모듈 사이에 침입과 관련 없이 수행되는 정상 모듈을 삽입하여 새로운 침입을 만든다. 모듈 위치변환을 통해 평균 6.1%의 침입 변환율과 더미코드 삽입을 통해 새로운 침입을 만들었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.105-108
• /
• 2004

This paper introduces a process of the development of a vibration test dummy for the posture of inclined seating. Experimental devices was invented to measure apparent mass curves on the contact point of the hip and the back of a seated human body. During the excitation of a rigid seat secured to a hydraulic exciter, force and acceleration signals were measured on the contact points to determine the apparent mass. In order to describe nonlinear characteristics of a human body, seven levels of Gaussian random signal were used for the base excitation. The modeling of the human body will be performed using measured apparent mass curves. The modeling will be done by June and the prototype of the test dummy will be invented in the following six months.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.201-205
• /
• 1998

시스템공학연구소 감성공학연구부에서는 수행중인 "멀티미디어 컨텐트용 입체음향처리 S/W개발"과제의 일환으로 머리전달함수(Head-Related Transfer Function, HRTF)의 측정을 수행하였다. 본 논문에서는 무향실에서의 HRTF 데이터 측정 과정 및 얻어진 HRTF들에 대한 음상정위청취 평가 결과에 대해 설명한다. 청취 평가에서는 피험자들이 측정된 HRTF와 MIT Media Lab의 KEMAR 더미헤드 HRTF를 사용하여 각 방향에 대해 필터링된 음원을 듣고 음상정위 주관평가를 시행하였는에, 측정된 HRTF를 사용하여 양호한 음상정위 결과를 얻을 수 있음을 확인하였다.있음을 확인하였다.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.53-57
• /
• 2000

In the present paper, a current technical progress for recycling of used steel can is described. The developed technology was a kind of pre-treatment through an automatic equipment system to increase recycling and melting efficiency of used steel co. The process consisted of several unit processes such as breaking of steel can bale, removing dust, separation of aluminum can, delacquering, and compressing to bale. Also, aluminum powders were recovered as a by-product at the delacquering step. The process was carried out automatically through by use of the developed equipment system. The automatic system could be very available in mass treatment of used steel can.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.479-485
• /
• 2017

This study provides basic indices for the development of a pet dog's dummy. Surveys were conducted with 71 owners of small dogs weighing under 10kg as preliminary research for information on pet dogs, uses and complaints about their clothes and demographic information to investigate wearing conditions. We collected pictures of 30 products sold in 12 brands at home and abroad to analyze size, materials, and patterns and investigate the actual production conditions. The survey results on wearing conditions indicated that 'Maltese' was the breed most often raised in households. Dogs weighing 'between 3kg and 4kg' were most common. Dogs under five years of age took up 53.5%. Most of the clothes were 'S' size, followed by 'M' and 'L' Most responded, 'The overall size does not fit' as an inconvenience when worn for long. Second, most brands developed products in three sizes. The displayed details included neck and chest circumference, back length and dummy height. Cotton and artificial leather were used most often for the outer fabric, cotton for the internal filling along with wire and aluminum for some products to maintain shape and motions. Most dummies consisted of back+outer leg, belly, inner leg and sole. Sometimes, a composition line was added by the chest shape, and an incision was placed between the body and leg for breeds with thick legs. Most patterns had a composition line in the leg connected from the belly.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.2
• /
• pp.91-101
• /
• 2012

In planning phase of Public Multi-Housing Projects, it is required to develop the methodology and criteria for fair cost prediction with influencing power from planning phase to occupancy phase. Many studies still have focused on the prediction of cost by multiple regression. However, there is no logical explanation about the influence of nonmetric variables for the prediction of cost in planning phase. Accordingly, this research pursues a cost prediction model including nonmetric variables for use in planning phase. There are 3 steps of this research : 1) Finding the factors influencing construction cost and assigning variables for a multiple regression. 2) Conducting a dummy regression analysis with nonmetric variables and model validation by comparing actual cost data. 3) Developing the ratio of RC structure cost to wall structure cost by using cost predection model. The results could establish cost prediction process including the influence of nonmetric variables and the ratio of RC structure cost to wall structure cost.

• Economic and Environmental Geology
• /
• v.34 no.3
• /
• pp.271-281
• /
• 2001

The characteristics of the heavy metal contamination in the soils affected by the tailings of the Palbong mine have been studied. The soils in the studied area consist mostly of loam by the particle size analysis, but a little of it, located near the stream, consist of loamy sand to sandy loam, finally to loam downward. The organic contents of soils are significantly low aoom 2 percent and the pH is in acidic ranging 6.0 $\pm$ 0.1. The samples of the parent rocks, the normal soils, the tailings and the channel deposits from the studied area were chemically analysed. From the result, the heavy metal concenlration of the soils is a little Jow compared with that of the parent rocks, shows the hydrologic process of the surface and the groundwater. The contamination of the tailings from the ore mining are high in lead, copper and arsenic. In the channel deposits the concenlrations of lead and copper are abnormally high but that of arsenic is uniquely low. And most of heavy metal contamination are decreased with the distance from the mine. It is caused by the properties of the surface and the ground water during the process of the heavy metal migration. The correlation-coefficient between sand and silt contents and the concentrations of Cd, Cu and Pb are significant but the amounts of As and Hg are increased with the clay contents. The dispersion of the heavy metals with the distance shows that the concentrations of them in the soils sampled at distance of 100 m to 200 m along the stream started near the Palbong mine are extremely high compared with those from other distances. These discrepancies are significant in Cd, Cu, Pb and Hg, but low in As. All the samples contain below detection limit of Cr+6 In the present stream water the concentrations of the heavy metals are not detected. So, it is interpreted that the concentrations in the soils are caused by the activities of the mining during the operation and have been continued by the dispersion from the tailings since after the closure of the mining, especially by the surface and ground water. The concentrations are diminished with the distance from the mining site, but in the interval of 800-2000 m increases abruptly. In the soil samples counted on the dispersion direction by wind, the lowering of the concentration is relatively uniform with the distance from the mining site. So, the rapid increase of the heavy metal concentrations is presumed to have been caused by the ground-water movement. In the migration of the heavy metals, the groundwater conditions, such as pH, Eh, the contents of colloidal particles, and Mn and Fe oxides are closely involveo. Integrating with these factors, it is interpreted that the groundwater conditions which have caused the heavy metal contamination of the studied area are those that the pH is about 3 in oxidized conditions, the contents of the colloidal particles are low, and Mn and Fe oxides are not involved in the migration of the heavy metals. Meanwhile, the vegetables growing on the soils in the studied area are not affected by the contamination of the heavy metals.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.7
• /
• pp.1058-1072
• /
• 1997

A head-neck complex dummy, for measuring brain pressure and reaction force in the cervical spine was developed for experimental study related in injury mechanism. Dummy comprised aluminium-casted head with water filled cavity for simulating brain and mechanical neck assembled with six motion segments. Several kinds of experiments (compression, bending, cyclic modulus, relaxation and constant velocity profile) for the developed mechanical neck showed that this neck model is biomechanically reliable compared with in-vitro test results. As an application of developed head-neck complex dummy, shock absorbing properties of protective helmet was chosen. The experiments showed that the maximum pressure increment of brain after impact was tolerable compared with the guide line for mild brain injury pressure (25psi). Constrast to this results, the reaction force in the neck was high enough to produce failure in the cervical spine.