• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.379-384
• /
• 2014

In case of sunken tankers, remaining-oil recovery operation should be conducted due to possible oil spill accident. However, the deep sea operation make difficulties in checking the completion of remaining oil recovery process, therefore the work termination procedure is very important. In this paper, a reasonable work termination procedure through the comparison and analysis of two cases(Youil No.1 and Osung No.3, Kyung-Shin) which were performed in different method, using disparate equipment. By investigating previously applied methods and techniques, work speed, safety and expenses were compared. The proposed ending procedure of the remaining-oil recovery project is to recover the remaining oil from each cargo tanks and to clean up such tanks whilst an independent surveyor proceeds to a confirmation procedure whereby said surveyor checks out whether any remaining oil exists by putting a stick in each cleaned up tanks and opening up the hatch cover of the tanks or the top place of the tanks to confirm the cleanness of oil. Such procedure shall be done through discussion by the ordering party, contractor and the independent surveyor all together with a flexible application.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.467-475
• /
• 2013

In order to seize quantitative materials as part of studies on measures for oil pollution prevention and control, the statistics of oil pollution incidents in Korean coastal waters for 10 years from 2003 to 2012 were analyzed with relation to the number of oil spills and the volume of oil spilt according to causes, sources and sea areas of spills. Total number and total volume of oil spills for 10 years were found to be 2,833 cases and 17,877 kL, respectively. 50.4 %(1,429 cases) of total number of oil spills were caused by negligence, although oil spillage due to negligence was 294 kL(1.7 %). While oil spillage caused by marine accidents was 17,400 kL(97.3 %), marine accidents accounted for 27.9 %(790 cases) of total number of oil spills. While negligence had a great influence on the number of oil spills, marine accidents had a huge impact on the amount of oil spilt. Fishing boats accounted for 42.7 %(1,210 cases) of the number of oil spills, and although oil tankers accounted for 9.2 %(261 cases) of the number of oil spills, oil spillage from oil tankers was 15,488kL(86.7 %). It means that oil tankers such as VLCC or ULCC may be the main sources of major oil spills and a few very large spills are responsible for a high percentage of the amount of oil spilt. While the number of oil spill incidents was closely related to the accidents of fishing boats, the volume of oil spilt was greatly affected by the major oil spill incidents of oil tankers such as M/T Hebei Spirit. The number and volume of oil spills were shown to be 1,613 cases(56.9 %) and 3,804 kL(21.3 %) in South Sea, 700 cases(24.7 %) and 13,501 kL(75.5 %) in West Sea, and 520 cases(18.2 %) and 572 kL(3.2 %) in East Sea of Korea, respectively. The highest number of oil spills was found in South Sea and the most volume of oil spilt was shown in West Sea of Korea for 10 years.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.4
• /
• pp.3-12
• /
• 2003

Due to the high demand on energy resources accompanied by continuing industrialization and urbanization, the world marine transportation of crude and product oils is being gradually increased. In Korea, we are exposed to the large-scale marine oil spill accidents because a very large oil tanker of 300,000 tonnage must enter Korean Ports every day to meet the domestic demand on oils. Although we are exerting our strength to reduce the probability of marine oil pollution accidents, a unrestorable oil spill is to occur owing to human errors, severe weather conditions, or combined causes. Thus, area contingency plan equipped with appropriate management system for response and restoration for the worst case discharge scenario must be entirely prepared to protect mine environments and coastal resources. In particular, we are focusing on the Environmental Sensitivity Index Map(ESI Map) to reduce the environmental consequences of both spills and clean-up efforts by specifying protection Priorities in advance and identifying in-situ response strategies. In this paper, Korean ESI Map is introduced with brief definition of sensitivity to oiling and main features of the software developed hitherto.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.407-417
• /
• 2002

Japanese oil companies have begun to set up a mutual support system to prepare for any large scale oil spillages due to the huge increase in size of tankers since 1973. In 1990, the Petroleum Association of Japan established the Oil Spill Response Department and has been conducting researches on management of oil spill combatting materials and the effective prevention of maritime oil disasters. Japan Coast Guard, in accordance with the regulations of the OPRC in 1995, formulated the national contingency plan and built a mutual-contact network among the related government institutions. Its Guard & Rescue Department. Disaster Prevention Section has been working for the maintenance of oil spill combatting materials and coordinating related work with private organizations. The Japanese government has been strengthening the maritime oil spillage management system since the Nakhodka wreck incident in 1997.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.15-28
• /
• 2016

Port of Busan is Korea's largest trading port processing over 18,000 TEU a year. This rapid growth causes air pollution problems in Busan. Ship emissions are significant air pollution sources and port area is relatively close to the business district, therefore it may have serious effects to the health of local people and environment. In this study, ship emissions are estimated, especially on hotelling large vessels. As a result, Port of Busan has 50,686, 48,842 ship calls and 2,343,037 and 2,297,118 tons of ship emissions in 2011 and 2012 respectively. Also, the environmental cost in Port of Busan is approximately 1.2 trillion won per year. This study emphasizes the necessity of ship emissions regulation, hence, it is expected to make a significant contribution in setting up ship emission management system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.2
• /
• pp.190-197
• /
• 1994

In this paper, 2513 marine casualties occurred in Korean waters, during 1989-1993, were analysed by the Multivariate Data Analysis Method. The main results obtained were as follows : 1. Moat of marine casualties resulted from the human factors such as careless operation and insufficient engine maintenance. Engine trouble accounted for main patten of accidents and great number of accidents occurred in fishing vessels. 2. From the point of view of the damage of human life and properties, accidents took place in cargo ships, passenger ships and tankers were serious, but in fishing vessels, those were not so serious. 3. Grounding, collision mainly resulted from careless operation, however flooding and capsizing were much affected by bad weather and material defect.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.04a
• /
• pp.14-14
• /
• 1999

비활성 가스제너레이터는 가스터빈 추진기관 및 기타 열기관을 이용하여 연소가 되지 않는 저온의 공기를 생산하는 기계장치를 말하며 이러한 저온의 비활성 기체를 화재 지역에 분사하는 경우 기존의 소방수를 이용한 화재 진압방식보다 매우 효율적으로 화재진압에 사용되어 질 수 있다. 일반적으로 민항기 등의 가스터빈 추진 기관에서 배기되는 기체내에는 터빈입구온도(TIT : Turbine Inlet Temperature)및 초과공기지수(Excess Air Coefficient)에 따라 다르게 나타나지만 TIT가 1500$^{\circ}$K인 경우 약 13-14%정도의 산소가 잔존하는 것으로 알려져 있다. 따라서 본 연구에서는 가스터빈 및 열교환 시스템 그리고 터빈 1단 등의 시스템 조합율을 통하여 대기 중의 기체의 온도를 영하 2$0^{\circ}C$ 및 산소함유량을 약 5%수준까지 낮춤으로서 이를 대형 화재 진압에 사용하기 위한 연구이다. 비활성 가스제너레이터에 사용하는 연료로는 Kerosene 및 CNG(Compressed Natural Gas)등이 사용될 수 있으며, 유량이 8.1kg/sec인 터보축 가스터빈 엔진을 사용하는 경우 18750㎥ 부피의 비활성기체를 생산하는데 Kerosene 연료가 약 1톤(200＄ 이하)이 필요한 것으로 계산되며 이에 소요되는 시간도 약 52분에 지나지 않는 것으로 계산되었다. 만일 50kg/sec의 보다 큰 가스터빈 엔진을 사용하는 경우 약 9분 정도가 필요한 것으로 계산되었다. 사용되는 가스터빈은 압축비가 15, 열교환기의 효율이 $\varepsilon$=0. 그리고 최종 터빈 1단의 팽창비가 1.25가 적합한 것으로 계산된다. 연구 분석 결과 기술적 문제점으로는 배기 가스온도가 낮은데 따른 출구 부분의 Bearing, Sealing이 문제가 될 수 있다고 판단되며 배기 가스 자체에 대기 공기중에 함유되어 있던 습기가 얼어붙는(Icing화) 문제가 발생하기 때문에 배기가스의 Icing을 방지하기 위하여 압축기 끝단에서 공기를 추출하여 배기부분에 송출할 필요성이 있는 것으로 판단되었다. 출구가스의 기체 유동속도가 매우 빠르므로 (100-l10m.sec) 이를 완화하기 위한 디퓨저의 설계가 요구된다고 판단된다. 또 연소기 후방에 물을 주입하는 경우 열교환기 및 기타 부분품에 발생할 수 있는 부식 및 열교환 효율 저하도 간과할 수 없는 문제로 파악되었다. 이러한 기술적 문제가 적절히 해결되는 경우 비활성 가스 제너레이터는 민수용으로는 대형 빌딩, 산림, 유조선 등의 화재에 매우 적절히 사용되어 질 수 있을 뿐 아니라 군사적으로도 군사작전 중 및 공군 기지의 화재 그리고 지하벙커에 설치되어 있는 고급 첨단 군사 장비 등의 화재 뿐 아니라 대간첩작전 등에 효과적으로 활용될 수 있을 것으로 판단된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.70-81
• /
• 1999

To predict the viscous boundary layers and wakes around a ship, the CFD techniques are commonly used. For the efficient application of CFD tools to practical hull farms, a 3-D field grid generating system is developed. The present grid generating system utilizes the solution of Poisson equation. Sorenson's method developed for 2-D is extended into 3-D to provide the forcing functions controling grid interval and orthogonality on hull surface, etc. The weighting function scheme is used for the discretization of the Poisson equation and the linear equations are solved by using MSIP salver. The trans-finite interpolation is also employed to assure the smooth transition into boundary surface grids. To rove the applicability, the field grid systems around a container ship and a VLCC with bow and stem bulb are illustrated, and the procedures for generating 3-D field grid system are explained.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.63-68
• /
• 2005

Optimum design of the big brackets is performed through iterated 3-D FE analyses to meet the permissible limits of stress, which consumes an excessive amount of calculation time. Therefore, this study has been prepared to determine rapidly and accurately an optimum size and scantling of the big brackets at the initial design stage. The generalized slope deflection method (GSDM) based on the span point concept is applied to enhance the efficiency of iterated structural analyses. The accuracy and applicability of the present method is verified by comparing with a detail 3-D FE analysis of web frame structures. As an optimization technique, evolution strategies (ES) are applied using discrete design variables for practical design.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.90-101
• /
• 1992

Some practical methods have already been proposed for predicting the characteristics of ship manoeuvring motions at relatively high advance speed. However, these methods can hardly be applied to motions of ships in starting, stoppint, backing and slow steaming conditions, even though such extensive motions are of vital importance from a safety point of view particularly in harbour areas. The method presented here aims at predicting the characteristics of ship manoeuvring at low advance speed, which covers starting, stopping, backing and slow steaming conditions. The force mathematical models at large angles of incidence to the hull as well as under the tilde range of propeller operations are formulated. Simulations of various manoeuvres at low advance speed are carried out for two types of merchant ship, i.e. a LNGC and a VLCC. Comparisons between simulations and corresponding full-scale measurements or free-running model tests provide a first verification of the proposed mathematical models.