• Korean Journal of Optics and Photonics
• /
• v.25 no.1
• /
• pp.38-43
• /
• 2014

An external cavity laser supporting two wavelengths is demonstrated by incorporating polymer waveguide Bragg reflectors and a superluminescent light-emitting diode. An oversized rib waveguide structure and Bragg gratings are designed by using the effective-index and transmission-matrix methods. Bragg gratings with different periods are inscribed on a polymer waveguide through double-exposure laser interferometry. In order to tune the cavity loss affected by the reflectivity of Bragg gratings, a Bragg reflectors with varying length is incorporated. Two-wavelength-mode lasing is achieved for the device consisting of 2-mm long, 537-nm period gratings and 2.2-mm long, 540-nm period gratings; the lasing wavelengths are 1554 nm and 1564 nm, with an output power close to 0 dBm, a 20-dB bandwidth of 0.2 nm, and a side-mode suppression ratio of 45 dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.874-880
• /
• 2018

3D modeling is extensively used in the field of architecture, machinery and contents production such as movies. Modeling is a time-consuming task. In order to compensate for these drawbacks, attempts have recently been made to reduce the production period by applying 3D scanning technology. 3D scanning for small objects can be done directly with laser or optics, but large buildings and sculptures require expensive equipment, which makes it difficult to acquire data directly. In this study, 3D modeling data for a large object is acquired using photometry with using drones to acquire the image data. The maintenance method for uniform spacing between the sculpture and the drone, the measurement method for the flight line were presented. In addition, we presented a production environment that can utilize the obtained 3D point cloud data for animation and a rendered animation result to find ways to make it in various environments.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.300-300
• /
• 2014

해양환경 하에서 대형 강구조물의 경우 장기간 부식손상을 방지하기 위해 아크 용사코팅 기술이 오래전부터 유용하게 이용되어 왔다. 아크 용사코팅 기술은 타 용사코팅 기술에 비해 경제성과 생산성이 뛰어나 대형 강구조물에 적용되고 있다. 용사재료로는 Al, Zn 또는 그 합금들이 주로 사용되어 강재에 대해 희생양극 방식효과를 나타낸다. 그러나 아크용사에 의해 적층된 코팅 층은 용사공정 중 불가피하게 수많은 기공과 산화물이 포함되어 내식성 및 내구성에 악영향을 미치게 된다. 따라서 본 연구에서는 알루미늄 합금의 용사코팅 층에 대하여 다양한 후처리를 통해 내식성과 더불어 내구성을 향상시키고자 하였다. 용사코팅은 알루미늄 합금 선재(1.6 ${\varnothing}$)를 사용하여 아크용사를 실시하였다. 용사 시 용사거리는 200 mm, 공기압력은 약 $7kg/cm^2$ 정도로 유지하면서 용사코팅을 실시하여 약 $200{\mu}m$ 두께로 코팅 층을 형성시켰다. 이후 용사코팅 층의 표면에 다양한 후처리재를 적용하였으며, 내구성을 평가하기 위하여 후처리 적용 전후 시험편에 대하여 캐비테이션 실험을 실시하였다. 캐비테이션 실험은 ASTM G32-92에 의거하여 주파수 20 kHz의 초음파 진동 장치(ultrasonic vibratory device)를 사용하였다. 그리고 시험편 표면과 발진 혼에 부착된 팁(tip)과의 거리는 1 mm로 일정하게 유지시킨 뒤, 캐비테이션 발생 시간을 변수로 하여 실험을 실시하였다. 손상된 용사코팅 층의 표면은 주사전자현미경과 광학현미경으로 관찰하였으며, 시험편 손상깊이는 3D 현미경으로 비교 분석하였다. 또한 캐비테이션 실험 전후의 무게를 측정하여 무게 감소량을 상호 비교하였다. 그리고 전기화학적 실험은 천연해수 속에서 자체 제작한 홀더(holder)를 이용하여 $0.33183cm^2$의 용사코팅 층만을 노출시켜 실시하였다. 그리고 기준전극은 은/염화은 전극을, 대극은 백금전극을 사용하였다. 분극실험을 통해 후처리 적용에 따른 용사코팅 층의 부식전위 및 부식전류밀도를 비교 평가하였다. 그 결과, 용사코팅 층에 의하여 강재에 대한 희생양극 방식전위가 확보되었으며, 후처리재가 적용된 용사코팅 층에서 내식성 및 캐비테이션 저항성이 향상되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.213-213
• /
• 2021

한국농어촌공사 농어촌연구원은 하천 및 해안분야의 다양한 수리모형실험을 수행할 수 있는 대형 수리모형실험 시설을 2018년에 구축완료하였다. 국내 최대 규모의 실험장뿐만 아니라 첨단 광학용 계측장비(PIV 및 LDV 시스템)를 연계한 전용실험수로, 대형유사실험수로 등 7종의 기능별 실험수로를 갖추고 있어 다양한 수리현상 분석을 수행할 수 있다. 최근에는 산사태의 주요 원인중 하나인 토석류 실험, 방조제 주변의 침·퇴적 실험 등을 수행하였으며, 본 연구에서는 3D 지형스캐너를 활용한 방조제 주변의 지형변동 수리모형실험에 대하여 소개를 하고자 한다. 방조제는 조수가 육지쪽으로 밀려들어와 내부개발지역이나 농지 등을 해수로부터 보호하기 위해 설치되는 외곽시설이다. 이러한 방조제 전면의 빠른 유속에 의한 침식은 배후지의 안전에 상당히 큰 문제를 야기시킨다. 방조제의 침식을 방지하기 위하여 방조제 전면에 수제공을 설치하여 수제공과 수제공 사이의 느려진 유속에 의해 방조제 전면에 토사를 퇴적시키는 방법이 있다. 본 연구에서는 방조제 전면에 수제공의 길이를 달리 설치하여 수제공 주변의 침·퇴적현상을 이동상 실험을 수행하여 분석하였다. 일반적으로 토사의 침·퇴적고를 계측하는 방법으로 일정한 격자망을 구성하여 각 지점별로 실험 전·후의 토사의 표고차를 수작업으로 계측한다. 이 경우는 실험자가 직접 측정하는 계측오차가 발생하게 되고 측정할 수 있는 지점의 수가 한계가 있어 전체적인 토사의 변화양상을 분석하기엔 어려움이 있다. 이를 해결하기 위하여 본 연구에서는 농어촌연구원이 보유하고 있는 3D 지형스캐너를 활용하여 토사의 표고차를 측정하였다. 실험에 사용한 3D 지형스캐너의 최대 측정거리는 스캐너가 설치된 중심점으로부터 반경 80m에 해당하며, 해상도는 1.6mm~50mm의 범위로 수작업으로 격자망을 구성하여 측정하는 것보다 상당히 높은 수준의 결과를 취득할 수 있으며 계측시간을 단축할 수 있는 장점이 있다. 하지만, 펄스레이저에 의한 지형스캔 방식은 수면과 같이 레이저가 투과할 수 없는 경우에는 계측이 불가능하며, 어두운 계열의 색을 스캔하는 경우 결과 분석에 주의할 필요가 있다. 본 연구에서는 이동상 재료로 안트라사이트(검은색)를 포설하였고, 검은색 계열의 실험사에도 3D 지형스캐너가 우수한 결과를 제공하는 것을 확인하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.41-54
• /
• 2021

It is very essential to estimate the water body area using remote exploration for water resource management, analysis and prediction of water disaster damage. Hydrophysical detection using satellites has been mainly performed on large satellites equipped with optical and SAR sensors. However, due to the long repeat cycle, there is a limitation that timely utilization is impossible in the event of a disaster/disaster. With the recent active development of Micro satellites, it has served as an opportunity to overcome the limitations of time resolution centered on existing large satellites. The Micro satellites currently in active operation are ICEYE in Finland and Capella satellites in the United States, and are operated in the form of clusters for earth observation purposes. Due to clustering operation, it has a short revisit cycle and high resolution and has the advantage of being able to observe regardless of weather or day and night with the SAR sensor mounted. In this study, the operation status and characteristics of micro satellites were described, and the water area estimation technology optimized for micro SAR satellite images was applied to the Daecheong Dam basin on the Korean Peninsula. In addition, accuracy verification was performed based on the reference value of the water generated from the optical satellite Sentinel-2 satellite as a reference. In the case of the Capella satellite, the smallest difference in area was shown, and it was confirmed that all three images showed high correlation. Through the results of this study, it was confirmed that despite the low NESZ of Micro satellites, it is possible to estimate the water area, and it is believed that the limitations of water resource/water disaster monitoring using existing large SAR satellites can be overcome.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.53-60
• /
• 1998

We develope a high repetition rate, short distance, optical range finder for surface roughness measurements of large structures, such as a highway road, etc. For range measurement based on a triangulation principle, we use a light emitting diode and an one dimensional Position sensitive photodetector for a light source and an angle detector of the reflected light at the object, respectively. The range finder has automatic power control and electrical background noise rejection capabilities which enable it to overcome variations of an object reflectance and to eliminate time-varying, as well as constant, background light noises. Our experimental results show less than ${\pm}1.5mm$ of measurement errors regardless of an object reflectance, for $22{\sim}38cm$ object ranges which are determined by considering the installation of the range finder and the depth of surface roughness.

• Korean Journal of Plant Tissue Culture
• /
• v.22 no.6
• /
• pp.323-327
• /
• 1995

This experiment was carried out to observe the origin and developmental pattern of somatic embryos of Oenanthe javanica ($B^{L}.$) DC. The experiment included observation of embryogenic cells and their development stages by light microscope, transmission electron microscope and scanning electron microscope. The embryogenic cells, which were smaller than non-embryogenic cells in size with expanded nucleus and dense cytoplasm. When stained with hematoxylin, the embryogenic cells were readily distinguished from the non-embryogenic cells of which cell walls were stained with safranin. It was observed at somatic embryos developed from single cells on the epidermis of developing embryos or in the surface or inside of embryogenic clumps by segmentation pattern. Observation with a transmission electron microscope revealed that the embryogenic cells had dense cytoplasm expanded nucleus, small vacuoles, large amyloplasts containing starch grains, and abundant organelles including lipid bodies. Under a scanning electron microscope, embryogenic callus was shown to consist of very smaller cells than non-embryogenic cells in an orderly arrangement and covered with a net-like structure, while the non-embryogenic callus consisted of large cells, irregular in size and arrangement, and covered with a gelatin-like material.

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.415-422
• /
• 2004

We propose and present a new multiplexed bend loss type single-mode fiber-optic sensor system for displacement measurement in order to measure the displacement of several mm of civil engineering structures such as bridges and buildings. We make a bend loss type fiber-optic sensor for measuring displacements using the signal difference between two reflection signals due to various bend losses generating at a pair of optical connectors by using the optical time domain reflectometer. And we fabricate a multiplexed bend loss type fiber-optic sensor detecting linear displacements of 4 measuring positions of an object by setting these new 4 fiber-optic sensors on a single mode fiber simultaneously. We find that the multiplexed fiber-optics displacement sensor has linearity of 0.9942, maximum displacement of 6 mm, and accuracy of 6% for 4 measuring points.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.175-181
• /
• 2008

We develop a fiber optic acceleration sensor with LED, PD, POF, and a cantilever beam, having film grating at the edge of the beam. Light is transmitted from LED to PD through the film grating. When the cantilever beam moves by external vibration, output light is modulated as sinusoidal signals. The characteristics of output signals are dominated by the spacing of the film grating and also by the size and the elasticity of the beam. Two output signals, having constant initial phase difference, are obtained by two gratings with 90 degree phase difference. Those two signals are used to determine phase angle, which is proportional to the displacement of the beam. Finally, the acceleration is determined from conversion equation between displacement and acceleration. This sensor is designed for monitoring the vibration of large and complex building in the low frequency range of below 7 Hz, and is particularly suitable to measure acceleration in electromagnetic environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.813-814
• /
• 2012

Recently, along with a development to promote low-carbon green growth, LED control IT convergence technology that can create environmentally-friendly emotional lighting is receiving attention. This is an interface control technology that includes a multi-sensor, switching technology, LED optics, and Internet-based remote lighting control, all of which utilize the lighting characteristics of LED lighting. The proposed system is a study on an intelligent LED control technology, and aims to use a multi-switching sensor in order to control LED discharge current so as to improve energy-charging method, to use a battery's SoC sensor, and to improve efficiency in the winter according to a section.