• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1179-1183
• /
• 2010

본 연구에서는 하천유역에 대한 호우의 대표 이동방향을 결정하였다. 대상유역으로는 내성천 유역을 고려하였으며, 101개의 호우사상을 선정하여 각각의 호우사상별로 방향적 특성을 분석하였다. von Mises 분포의 주방향을 이용하여 모든 호우사상의 대표 이동방향을 결정하고, 이를 이용하여 내성천 유역에 대한 호우 대표 이동방향을 결정하였다. 아울러 호우 발생특성별(장마, 태풍, 대류성 강우)로 호우의 방향적 특성을 분류하여 각각의 특성이 구분될 수 있도록 하였다. 적용 결과, 태풍에 의한 호우의 이동방향은 기존 연구결과와 유사하게 주로 북동 방향으로 진행되었으며, 장마와 대류성 강우에 의한 호우가 대표방향 결정에 가장 큰 영향력을 갖는 것으로 나타났다. 아울러 대상유역에 대한 호우의 대표 이동방향은 mode의 특성이 뚜렷하게 한 방향으로 나타나며, 내성천 유역의 경우 대표 호우 이동방향은 59.45도로 결정되었다. 이러한 결과는 한반도에 발생하는 강우의 특성과도 잘 부합하는 것으로 판단된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.2
• /
• pp.91-102
• /
• 2010

This study analyzed methodologies for determining the representative direction of a storm event. The mean direction, median direction, and modal direction of von Mises distribution were considered as representative directions. In addition, the results with and without considering the storm moving distance were also compared. As results, the modal directions of von Mises distribution were found to explain the directional characteristics of a moving storm much better than other methods. Also, it was found that the storm moving distance has a significant effect on the determination of representative directions of a moving storm, whose uncertainty can also be decreased significantly by considering the moving distance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2004

The direction component uses mainly the sobel and FFT method. The sobel method is difficult to set representative direction when we wish to extract representative direction when we wish to extract representative direction component and the complicated processing process of sobel mask because same value appears in the low provision image or high provision image and we cannot accumulate tilt size in case of making accumulate after making unit vector to pixel. The method that uses FFT conversion for direction extraction is possible in case that ridge has correct direction specification and must use a special direction filter. After thinning the binary image to supplement above weak point in the paper, we extract direction component by pixel unit, and we extract the most direction components of pixel that exist in block of 8${\times}$8 pixels size as representative direction of ridge.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.6
• /
• pp.109-117
• /
• 2010

This study quantified the storm direction for a river basin by applying the von Mises distribution, also determined the representative storm direction. Additionally, the whole procedure was repeated for several storm types such as frontal, typhoon and convective storms for their comparison. From the results derived by analyzing a total of 101 storm events for the Naesung river basin, the von Mises distribution was found to explain the directional characteristics of storms. The representative moving directions derived for three different storm types were significantly different each other, which is coincident with the climate of Korea. The results derived in this study could be helpful to estimate more quantitatively the difference in the runoff response with respect to the moving direction of a storm.

• Composites Research
• /
• v.32 no.5
• /
• pp.270-278
• /
• 2019

In this study, the transverse mechanical properties of the unidirectional fiber reinforced composite modeled with fiber, matrix, and interphase is predicted with the representative volume elements and is calibrated by adjusting the properties and thickness of the interphase by referring to the test results. While the conventional representative volume elements modeled with fiber and matrix shows high predictive accuracy for the longitudinal mechanical properties, but it shows some deviations in the transverse mechanical properties. In order to compensate such gaps, the interphase region is employed, and its mechanical properties are adjusted to improve the prediction accuracy according to various elastic modulus, thickness, and strength parameters. As a result, the deviation of the transverse elastic modulus and strength is reduced significantly similar to the test results of the unidirectional composites with the accuracy of the longitudinal mechanical properties preserved.

• Journal of Korean Library and Information Science Society
• /
• v.40 no.1
• /
• pp.115-132
• /
• 2009

Regional central library have to reflect the characteristics of the each region. And it must to set priority the various tasks. The purpose of this study is to investigate and analyze the librarian's recognition about roles of regional central library for support to the local libraries. As a result, librarians was recognized the direction of library policy and cooperation between the local libraries as the most urgent task. Also, librarians was considered the educational and cultural programs and interlibrary loan as the top task to perform in the future. The results is very useful in deciding contents of library cooperation and establishing of the Library Policy.

• Tunnel and Underground Space
• /
• v.28 no.4
• /
• pp.343-357
• /
• 2018

Algorithm which can analyze the slope failure behavior utilizing the comprehensive information of the dense point of joint poles and the joint set orientations, both of which are obtained statistically, and the defect pattern of pole distribution has been developed. This method overcomes the potential incorrectness of the hemispheric projection method utilizing the joint set orientations only and also enhances the reliability of slope failure analysis. To this end a method capable of calculating the joint dispersion index directly from the joint pole distribution, instead of contour map, has been devised. The representative orientations for the slope failure analysis has been determined by considering the number and orientations of cone angle-dependent joint sets as well as the joint dispersion index. By engaging these representative orientations to the hemispheric projection analysis more reliable slope failure examination has been carried out. Sensitivity analysis for the potentially unstable slope of plane failure mode has been performed. Significance of joint strength index and the external seismic loading on the slope stability has been fully analyzed.

• Composites Research
• /
• v.33 no.1
• /
• pp.30-37
• /
• 2020

Stress distributions dependent on fiber arrangements are studied using the two-dimensional representative volume element (RVE) model for uni-directionally continuous fiber-reinforced composites subjected to transverse tensile loading. It is easily expected that the stresses around the fibers are concentrated mainly due to the stiffness mismatch between the fiber and matrix materials. In this presentation, it is shown that the stresses are not always increased although the distance between two fibers is shortened. The 2D RVE models, originally having a regular hexagonal fiber array, is utilized to study the effect of the fiber locations on the stress distributions. As the central fiber is relocated, the stress distributions around the fiber are obtained through finite element analysis. It is found that the stresses around the fiber are strongly dependent on the fiber distance as well as the angle between the loading direction and the line connecting two fibers.

• KOREAN POULTRY JOURNAL
• /
• v.53 no.4
• /
• pp.108-111
• /
• 2021

지난해 8월 바이엘코리아(주) 동물의약사업부와 한국엘랑코동물약품(주)가 통합되면서 한국엘랑코동물약품(주) 초대 대표로 정현진 대표가 맡아 회사를 이끌어가고 있다. 국내는 물론 수출 확대 노력으로 전 세계적인 수의·축산 발전을 위해 힘쓰는 정현진 대표를 만나 과거 활동과 앞으로 활동방향 및 목표에 대해 들어보았다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05a
• /
• pp.703-706
• /
• 2003

이 논문은 입력 지문 영상에 대하여 블록 이진화와 병렬 세선화를 거친 이미지에 4개의 각기 다른 방향 성분 요소를 이용하여 각 블록에 대한 대표 방향 성분들을 추출하여 방향 성분 이미지를 얻었다. 추출된 대표 방향성분 이미지에 정의된 방향성 패턴을 적용시켜 일치되는 블록에 대하여 1차와 2차 중심점으로 추출하였다. 이렇게 추출된 1차와 2차 중심점을 이용하여 직교좌표를 생성하였다. 직교좌표는 지문영상을 처리하여 인식 및 인증시스템에서 유용하게 쓰일 수 있을 것이다.