• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.77-83
• /
• 2009

In this study, we investigated relationship of muscular activity in thigh muscle and knee joint angle from bicycle exercise. The EMG signals of 16 persons were measured from rectus femoris and vastus lateralis muscles. The experiment was performed in 5 steps according to saddle distance and 60RPM/200W loads were applied for 1 minute at each step. EMG activation of rectus femoris and vastus lateralis muscles and knee joint angle were recorded using surface EMG and motion analysis system, respectively. Experimental results of inter relationship between EMG activation of thigh muscles and knee joint angle showed high correlation from Step 1. The unified EMG activation of two muscles and knee joint angle showed negative correlation(-0.97).

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.10 no.2
• /
• pp.100-104
• /
• 2011

The purpose of this article is to examine correlation between femoral rotational angle and subjective satisfaction of high tibial osteotomy outcome of the range of motion of knee joint. The subjects were 15 patients (6 males, 9 females) with primary osteoarthritis undergoing high tibial osteotomy from June of 2004 to August of 2008. They were CT tested on the knee joint before and after high tibial osteotomy. TEA (Fig. 1) and Akagi's line (Fig. 2) are analyzed as percentages. The Kendall's and Spearman's nonparametric correlation coefficient were used for the statistical tests with 0.5 level of significance. The result reveals that femoral rotational angle correlates with not the range of motion of knee joint but subjective satisfaction of the patients. Therefore, this will enable patients and physicians to have better clinical outcome.

• The Journal of the Korea Contents Association
• /
• v.12 no.1
• /
• pp.329-337
• /
• 2012

The purpose of this study was to investigate the functional changes of the vastus medialis while the neuromuscular electrical stimulation(NMES) was performed in elderly women with knee osteoarthritis. The subjects of this study were 30 women who were diagnosed degenerative arthritis, 15 in the experimental group and 15 in the control group. The experimental group performed conventional physical therapy and neuromuscular electrical stimulation, and the control group received only conventional physical therapy, five times per week for four weeks. Outcome measures were assessed before and after 4weeks using the VAS(pain), quadriceps femoris strength, thigh circumference, and Q-angle. The data of the quadriceps femoris strength and thigh circumference were significantly increased in experimental group(p<0.05). The data the pain was significantly decreased in both the two groups(p<0.05). There were statistically significant differences in quadriceps femoris strength and thigh circumference between the two groups(p<0.05). As the result, the application of neuromuscular electrical stimulation of the vastus medialis could be more effective for decrease pain and improving muscle function in patients with knee osteoarthritis.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.233-239
• /
• 2003

Falling related injuries are categorized as the most serious and common medical problems experienced by the elderly, hip joint fracture, one of the most serious consequences of falling in the elderly, occurs in only about 1% of falling. Nevertheless, hip fracture accounts for a considerable part of the disability, death, and medical costs associated with falling. In this study, we considered the impact angle and displacement rate in falling as another factor affecting femoral strength. Using a fresh-frozen human femur, we developed system to simulate the falling condition and then conducted the experiments changing the impact angle (0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$) of proximal femur. Also, in order to analyze the relative risk due to falling to normal situation in proximal femur, we did the static test simulating the two-legged stance condition. The results showed that the change in impact angle affected the strain distribution in proximal femur, and that a large deformation in femoral neck than in other sites. Furthermore despite low impact velocity, a large deformation in proximal femur occurred in the impact test and different strain distribution was observed compare to the static case.

• Journal of Biomedical Engineering Research
• /
• v.23 no.2
• /
• pp.119-130
• /
• 2002

The nonlinear finite element program has been developed to analyze the design performance of an artificial hip prosthesis and long term behavior of a treated femur with stems made of composite material after cementless total hip arthroplasty(THA). The authors developed the three dimentional FEM models of femoral bone with designed composite stem which was taken with elliptic cross section of 816 brick elements under hip contact load and muscle farce in simulating single leg stand. Using the program, density changes, stress distributions and micromotions of the material femoral bone were evaluated by changing fiber orientation of stems for selected manufacturing method such as plate cut and bend mold. The results showed that the composite materials such as AS4/PEEK and T300/976 gave less bone resorption than the metallic material such as cobalt chrome alloy, titanium alloy and stainless steal. It was found that increasing the long term stability of the prosthesis in the femur could be obtained by selecting the appropriate ply orientation and stacking sequence of composite.

• Proceedings of the Korean Society of Radiological Science
• /
• 1995.10a
• /
• pp.125.1-125.1
• /
• 1995

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.161-163
• /
• 2010

본 연구의 목적은 등속성 운동수행 및 측정시 hip joint angle에 따라 대퇴근육의 concentric 과 eccentric 근력차이를 분석하기 위하여 등속성 기기 의자 등받이 경사각도를 $100^{\circ}$, $120^{\circ}$, $140^{\circ}$에서 peak torque를 검사하였다. 대상자는 20대 초반의 건강한 남자 대학생 12명을 대상으로, 등속성 기기(Isomed 2000, Germany)를 이용하여 seated position에서 $60^{\circ}/s$ 의 각속도를 사용하여 검사를 수행하였다. 측정순서는 등속성기기 의자 등받이 경사각도 $100^{\circ}$, $120^{\circ}$, $140^{\circ}$ 순으로 2-3일 간격으로 진행하였다. 통계처리 방법은 SPSS 12.0 프로그램을 이용하여 평균과 표준편차를 산출하였으며, 각각의 hip angle에 따른 단축성과 신장성 peak torque 값의 차이는 one-way ANOVA(3RM)을 이용하여 처리하였고, 사후검증은 Tukey를 사용하였으며, 유의수준은 p<.05로 하였다. 연구결과 대퇴사두근의 단축성 근력은 등속성 기기 의자 등받이 경사각 $100^{\circ}$, $120^{\circ}$, $140^{\circ}$사이에 유의한 차이(p=.000)가 나타나 사후 분석결과 $100^{\circ}$와 $120^{\circ}$ 사이(p<.01) 그리고 $100^{\circ}$와 $140^{\circ}$ 사이(p<.001)에 유의한 차이를 나타내었으며, 신장성 근력에서는 유의한 차이가 나타나지 않았다. 햄스트링의 단축성 근력은 3종류의 hip angle사이에 유의한 차이(p=.001)가 나타나 사후분석결과 $100^{\circ}$와 $140^{\circ}$사이(p<.05) 그리고 $120^{\circ}$와 $140^{\circ}$ 사이(p<.01)에 유의한 차이를 나타내었으며, 그러나 신장성 근력에서는 유의한 차이가 나타지 않았다. 이러한 결과로 미루어 볼 때 등속성 운동수행 및 근력측정 시 hip joint angle 에 따라 대퇴사두근과 햄스트링의 단축성 근력에서 유의한 차이가 나타나 hip joint angle을 고려하여 대퇴근육의 운동및 측정이 이루어져야 할 것으로 사료된다.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.2
• /
• pp.43-48
• /
• 2012

In this paper, we present the method of gait phases detection using multi biomedical signals during normal gait. Electromyogram(EMG) signals, muscle of thigh angle measurement device and resistive sensors are used for experiments. We implemented a test targeting five adult male and identified the pattern of EMG signal of normal gait. For acquiring the EMG signal, subjects attached surface Ag/AgCl electrodes to quadriceps femoris, biceps femoris, tibialis anterior and gastrocnemius medialis. Resistance sensors are attached to the heel toe and soles of the each feet for measuring attachment state of between feet and ground. Infrared sensors are attached on the thigh and thigh angle measurement device has the range from flection 25 degrees to extension 20 degrees. The results of this paper, The stance and swing phase could be confirmed during the normal gait and be classified in detail the eight steps.

• Journal of the Korean Society of Radiology
• /
• v.8 no.2
• /
• pp.57-63
• /
• 2014

This study aims to find out the standardized test criteria regarding patients with the anterior cruciate ligament damage by identifying the degree of the flexion gap of femur and tibia upon bending of the anterior cruciate ligament in order to carry out the accurate test of such impairment. On the standardized test method and judgement criteria upon the anterior cruciate ligament test using Telos, it has been shown that there was no significant difference in the results according to the position of a fixed roller in the anterior cruciate ligament test for normal patients. However, in a test for patients who had undergone the anterior cruciate ligament reconstruction, it has been shown that the measured values of the anterior cruciate ligament tended to be pushed when the position of a fixed roller was less than 1cm in the test according to the position of a fixed roller of Telos (less than 1cm, more than 3cm), and this was statistically significant. The anterior cruciate ligament test (knee stress test) is a limited method used in orthopedics and rehabilitation medicine, and there have been no standardized test guidelines available yet although numerous ligament measurement tests have been performed. In addition, since the measured values are often different depending on testers even on the test that is expected to give the same result, the reproducibility of the test is still low. Accordingly, it is considered that the criteria for the anterior cruciate ligament test need to be established, and this would contribute to the accuracy of the diagnosis through the accurate test and standardized measurements.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.19-31
• /
• 2006

이 연구의 목적은 각 분절의 마커세트와 무릎관절 중심 정의가 3차원 무릎 관절각을 산출하는데 얼마나 민감하게 영향을 미치는지를 연구하였다. 자료수집은 1명을 실험대상자로 하여 두 가지 형태의 각기 다른 분절의 정의와 무릎관절의 중심을 나타내는 반사마커들을 동시에 오른쪽 하지에 부착시켜 실험을 실시하였다. 실험대상자의 달리기동작 중 좌측으로 45도 방향전환동작의 지지기를 분석하였다. 이를 위해서 8대의 고속카메라들을 이용하였고 달리기속도는 4m/$sec{\pm}(10%)$로 통제하였다. 하지분절의 발분절에는 하나의 마커세트를, 정강이와 대퇴분절에는 두 가지의 다른 마커세트들을 부착시켰다. 발분절에는 3개의 마커를 신발의 뒷부분에 부착하였고 정강이분절을 정의하기 위하여 첫 번째 마커세트는 경골을 중심으로 3개의 마커들을 두 번째 마커세트는 비골을 중심으로 3개의 마커를 부착하였다. 대퇴분절의 마커세트를 정의하기 위하여 첫 번째 마커세트에는 대퇴골을 중심으로 3개의 마커를 두 번째 마커세트에는 대퇴근육을 중심으로 3개의 마커들을 부착하였다. 무릎관절중심을 정의하는데 두 가지 다른 정의가 적용되었다. 첫 번째 무릎중심을 무릎의 내측과 외측의 마커들을 통해 두 마커의 중심을 무릎관절의 중심으로 정의하였다. 두 번째 무릎중심정의는 무릎의 외측부분과 슬개골의 중심에 부착된 마커들로부터의 교차점을 무릎관절중심으로 산출하였다. 무릎관절의 각도를 산출하기 위해서 JCS(Joint Coordinate System)의 정의가 적용되었고 연구의 결과는 다음과 같았다. 두 가지의 다른 분절마커세트 사이에서 무릎의 신전(extension)과 굴곡(flexion)은 유사한 형태를 나타냈으며 최대 무릎굴곡(peak knee flexion)각에서 $4.746^{\circ}$의 차이를 나타냈다. 다른 분절마커세트 사이의 회전(rotation)각과 내전(adduction)/외전(abduction)에서는 서로 다른 형태를 나타내었고, 두 마커세트간 최대무릎외측회전(peak knee external rotation)각도에서는 $15.628^{\circ}$의 차이를 나타냈다. 또한, 각 분절마커세트 내에서 두 가지의 다른 무릎관절 중심의 정의가 얼마나 무릎도 산출에 영향을 미치는지를 비교했을 때 무릎의 최대외측회전(peak external rotation)각에서 차이를 나타내었다. 첫 번째 분절마커세트의 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.549^{\circ}$의 차이를 나타냈고, 두 번째 분절마커 세트에서 무릎관절중심정의의 형태변화에 따라 최대외측회전각은 $0.309^{\circ}$의 차이를 나타냈다. 이와 같이 분절을 나타내는 마커세트와 무릎관절중심정의의 형태변화에 따라 무릎간을 계산하는데 있어서 결과가 다르게 산출되었다. 즉, 관절각의 계산이 분절에 부착되는 마커의 정의 혹은 위치에 매우 민감하게 영향을 받았다. 따라서 연구자가 여러 실험대상자들을 대상으로 실험시 마커세트 혹은 마커들을 동일한 위치에 가깝게 부착하는 것이 마커부착으로부터 발생하는 실험오차를 줄일 수 있을 것이다.