• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.4
• /
• pp.7-14
• /
• 1975

A significant new technique in the dsvelopment of micro-wave circuits is the process of untilization of coupled lines in the transverse electro-magnetic field. The bases for this technique are the application of even-and odd-mode characteristic impedances of the transmission line. This article describes the properties of directional couplers and explains a prccfdure usrd to design micro-strip directional couplers with the aid of the computer. The article also describes the experimental results obtained from seven microstrip couplers, which were built to verify the computer program and the approximate solutions. It can be seen that in cases at X-band where couplings of 10 to 20dB are required, the computer program and approximate solutions will produce good results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.60-68
• /
• 2017

Since the bridge is the main facility of the road that is the core of the civil infrastructure, the bridge is constructed to ensure stability and serviceability during the traffic use. In order to secure the safety of bridges, evaluating the integrity of bridges at present is an important task in the maintenance work of bridges. In general, to evaluate the load carrying capacity of bridges, it is possible to confirm the superimposed behavior and symmetric behavior of bridges by estimating the lateral load distribution factor of the bridges through vehicle loading tests. However, in order to measure the lateral load distribution factor of a commonly used bridge, a static loading test is performed. There is a difficulty in traffic control. Therefore, in this study, the static displacement component of the bridge measured in the dynamic loading test and the ambient vibration test was extracted by using empirical mode decomposition technique. The lateral load distribution was estimated using the extracted static displacement component and compared with the lateral load distribution factor measured in the static loading test.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.948-955
• /
• 2017

Currently, porous materials (e.g., mineral wool) are the core materials used in offshore plant panels, but in spite of their superb acoustic performance, these items must be replaced for environmental reasons. A honeycomb structure is widely used throughout the industry because of its high strength-to-weight ratio. However, research in terms of noise and vibration is minimal. An acoustic study should be conducted by taking advantage of honeycomb structures to replace porous materials. In this study, a simulation was performed assuming that a honeycomb panel is a superposition of symmetric mode and antisymmetric mode. Reliability was verified by comparing a simulation results based on a theory with a experimental results, and the possibility of the panel as a core material was evaluated by studying the sound insulation characteristics of a honeycomb. As the panel thickness increased, the coincidence frequency shifted to low frequency. As the angle between horizontal line and oblique wall and cell-size decreases, the sound insulation performance is improved. And as the cell-wall thickness increased, the sound insulation performance improved.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.47-54
• /
• 2020

Integration of active and passive waveguides is an essential component of the photonic integrated circuit and its elements. Butt joint is one of the important technologies to accomplish it with significant advantages. However, it suffers from high optical loss at the butt joint junction and need of accurate process control to align both waveguides. In this study, we used beam propagation method to simulate an integrated device composed of a laser diode and spot size converter (SSC). Two SSCs with different mode properties were combined with laser waveguide and optical coupling efficiency was simulated. The SSC with larger near field mode showed lower coupling efficiency, however its far field pattern was narrower and more symmetric. Tapered passive waveguide was utilized for enhancing the coupling efficiency and tolerance of waveguide offset at the butt joint without degrading the far field pattern. With this technique, high optical coupling efficiency of 89.6% with narrow far field divergence angle of 16°×16° was obtained.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3A
• /
• pp.309-316
• /
• 2010

This paper proposed a nonlocal anisotropic damage model to simulate the behavior of plain and reinforced concrete structures that are predominantly tensile and compressive load. This model based on continuum damage mechanics, used a symmetric second-order tensor as the damage variable. For quasi-brittle materials, such as concrete, the damage patterns were different in tension and in compression. These two damage states were modeled by damage evolution laws ensuring a damage tensor rate proportional to the total strain tensor in terms of principal components. To investigate the effectiveness of proposed model, the double edge notched specimen experimented by nooru-mohamed and reinforced concrete bending beam were analyzed using the implementation of the proposed model. As the results for the simulation, the nonlocal anisotropic damage model with an adequate control of rupture correctly represented the crack propagation for mixed mode fracture. In the structural failure of reinforced concrete bending beam, the proposed model can be showed up to a very high damage level and yielding of the reinforcements.

• Composites Research
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2001

A simplified method for determining the three mode(I, II, III) components of the strain energy release rate of free-edge delaminations in composite laminates is proposed. The interlaminar stresses are evaluated using the interface moment and the interface shear forces which are obtained from the equilibrium equations at the interface between the adjacent layers. Deformation of an edge-delaminated laminate is analysed by using a generalized quasi-three dimensional classical laminated plate theory. The analysis provides closed-form expression for the three components of the strain energy release rate. The analyses are performed for composite laminates subjected to uniaxial tension, with free-edge delaminations located symmetrically and asymmetrically with respect to the laminate midplane. The analysis results agreed with a finite element solution using the virtual crack closure technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.373-381
• /
• 2020

Quadrotor is simple to model because of the symmetric structure but it has the disadvantage of being relatively sensitive to the external disturbance and system uncertainty. The PID technique applied for the attitude control of quadrotor has been applied comprehensively, but it has a disadvantage that is hard to precise control in the nonlinear system. In this work, a quadrotor attitude control law using the super twisting algorithm is studied, which has robust characteristics against disturbance and system uncertainty. To evaluate the attitude performance by the proposed technique, simulation studies and actual flight tests are carried out, and compared with the conventional PID controller.

• Journal of Korean Society of Steel Construction
• /
• v.14 no.3
• /
• pp.423-432
• /
• 2002

This study presented analytical and numerical solutions for spatial free vibration of nonsymmetric thin-walled circular curved beams. The closed-form solutions were obtained for in-plane free vibration analylsis of monosymmetric curved beams. Likewise, two types of thin-walled curved beam elements were developed using the third and the fifth order Hermitian polynomials. In order to illustrate the accuracy and usefulness of the present method, this study presented analytical and numerical solution and compared these with the results using the ABAQUS's shell elements. In particular, effects of the thickness-curvature as well as the inextensional condition were investigated on the free vibration of curved beams with nonsymmetric sections.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.1 s.256
• /
• pp.97-104
• /
• 2007

Vibration analysis of a rigid body supported by in-parallel linear springs can be greatly simplified by utilizing the conditions for a plane of symmetry. The vibration modes of an oscillatory system having plane of symmetry are classified into the in-plane and out-of-plane modes. From the viewpoint of screw theory, they represent respectively the vibration axes perpendicular to the plane of symmetry and lying in the plane of symmetry. In this paper, the sets of orthogonal and mutually intersecting three springs are used as resilient support of a rigid body. The geometrical conditions for the system to have a plane of symmetry and diagonalized stiffness matrix are presented. From the orthogonality of the vibration modes with respect to the inertia matrix, the geometrical relation between the reaction wrenches and the vibration modes are derived. This geometrical relation is then used to get the cubic design equation for the design of out-of-plane modes. The numerical design example of engine mounts is presented in order to explain the suggested design technique.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.195-200
• /
• 2020

Leakage and Bragg condition of optical waveguides with blazed grating profile are evaluated in detail by using novel and rigorous modal transmission-line theory (MTLT) based on eigenvalue problem. The blazed waveguides classified as symmetric, sawtooth and asymmetric gratings occur leaky-wave stop-band at Bragg conditions and anomalies based on Rayleigh condition near Bragg conditions. Furthermore, DFB properties of blazed waveguides at Bragg conditions are analyzed by applying longitudinal equivalent transmission-line with characteristic impedance of periodic grating. The numerical results show that the reflected power of DFB waveguides is maximized at Bragg conditions in which leaky-wave stop-bands occur.