• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.244-246
• /
• 2003

현재 정부기관이나 은행 등과 같이 침입 탐지의 보안 서비스를 필요로 하는 곳에서는 주로 CCTV(Closed Circuit TV)와 DVR(Digital Video Recording)과 같은 보안 장비들이 사용되고 있다. 하지만 이러한 장비들은 고가이므로 일반 가정이나 소규모 사업장에 이를 도입하는 것은 어렵다. 이에 본 논문에서는 CCTV나 DVR과 같은 고가의 보안 장비를 저렴하게 대체할 수 있는 인터넷 카메라를 이용한 침입탐지 시스템인 IDS(Intrusion Detection System)를 설계 및 구현하였다. IDS는 침입 탐지 보안 시스템이 기본적으로 갖춰야 하는 모니터링, 녹화, 재생. 침입 탐지 등의 기능을 제공할 뿐만 아니라 인터넷을 이용하므로 거리상의 제약점을 극복하였으며, TCP/IP를 이용한 인터넷 카메라를 사용하여 CCTV나 DVR보다 매우 저렴하게 설치 가능하다.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2005.05a
• /
• pp.188-191
• /
• 2005

본 논문에서는 RF 플라즈마 발생 장치인 RF-Match의 기구적 최적 설계를 제안하였다. RF-Match의 정합소자 구동 기어단의 효율 개선을 위해 베벨기어를 웜기어로 대체 설계하여 백래쉬를 제거하였으며, 정합소자의 고전력 인가로 인한 아크 발생 문제의 해결을 위해 접지를 개선하여 RF-Match의 기구적 성능을 향상 시켰다.

• The Optical Journal
• /
• s.103
• /
• pp.51-53
• /
• 2006

연구중심의 대학원 광주과학기술원 기전공학과의 레이저 나노가공연구실에서는 반도체 회사 및 관련 장비 제조업체들이 유용하게 활용할 수 있는 초미세구조물 제조하는 기술을 중점 개발하고 있다. 이를 통해 기존의 기술로는 불가능했던 제품의 가공을 가능하게 하거나 시간 및 경비가 많이 드는 현재의 생산 공정을 단순하고 경비가 절감되는 공정으로 대체하는데 유용하게 활용될 것으로 큰 기대를 모으고 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.472-475
• /
• 2001

본 논문은 경제적, 기술적 문제로 도외시되었던 메트로 이더넷의 새로운 등장 배경 및 기술동향과 향후 전망에 대해 기술하고 있다. 메트로 이더넷은 기존의 LAN, WAN 장비시장을 대체하는 기술인 동시에 xDSL기술의 대안으로도 사용될수 있으며, 요즘 이슈가 되고 있는 사이버 아파트 랜솔루션등으로 가능성을 지니고 있다.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.53-59
• /
• 2009

Low pressure mercury lamp type UV equipments have been widely used for cleaning and modification of PCB surfaces. To enhance the productivity of the process, we newly developed remote DBD type atmospheric pressure plasma equipment. The productivity of both equipments could be compared by measuring surface contact angle for various transferring speed. By the result of the measurement, we could verify that the productivity of the atmospheric pressure plasma be superior to the productivity of the UV equipment. XPS experiments confirmed that the surface effect of the UV and atmospheric pressure plasma processing are similar for each other. Organic contamination level was reduced after the processing and some surface elements were oxidized for both cases. Finally, the atmospheric pressure plasma equipment was adapted to flip chip BGA's flux printing process and it was concluded that the printing uniformity be enhanced by the atmospheric pressure plasma surface treatment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2489-2496
• /
• 2014

The existing ship repair tool management system based on hand writing has many problems such as frequent loss of tool and overdue. To solve this problem, same systems have adopted the bar-code system. However, the systems can't cope with a problem to substitute spurious tool for genuine one on bar-code damage. Therefore, additional validation steps are necessary in order to manage expensive ship repair tool. In this paper, we propose an image comparison method for ship repair tool management. To be more concrete, we propose a normalization method and determination conditions for image comparison to use characteristics of mobile device. The normalization method makes use of the characteristics of mobile device that provides functions of real time recording, overlapping and cropping images. The proposed method applies three conditions(sum of inner angles, size of angle, position of corner coordinates) into the comparison module. The implemented system shows good performance on change direction, lighting, size and etc. The accuracy is more than 95%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.120-127
• /
• 2006

In Korea the vehicle enforcement system(VES) detects speeding vehicle using two inductive loop detectors. And the speed reliability of theirs are evaluated through the analysis of image frame which is captured from video camera. This method is validated to evaluate VES on Korea Laboratory Accreditation Scheme(KOLAS) but it needs much time and expense for the analysis of image frame. Because the number of VES are increasing rapidly, the requirement of new evaluation method is necessary. On this paper, the tape switch sensor as a substitution of existing method was introduced and its application on the site are discussed. On the site test we compared the tape switch sensor on the speed measurement of vehicle with the video image frame. As a result we have founded that the tape switch sensor is evaluated to be feasible system on site in respect to measure the overspeed vehicle.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.48-58
• /
• 2022

This study tried to assess the applicability of a hand-held LiDAR for measuring the geometric structures of forest trees including diameters at a breast height(DBH) and tree height(H). A traditional method using tapelines was conducted to analyze the accuracy of the LiDAR instrument in the Taebaeksan national park in South Korea. Four statistical indices which are bias, root mean square error, mean absolute error, and correlation coefficient were employed to compare the measurements by the LiDAR instrument and traditional method. The DBHs from the LiDAR were very similar to those from the traditional method. And it indicated that the LiDAR is sufficient to be a alternative of a traditional method. However, there was a limitation in assessing the accuracy of LiDAR for measuring tree height by comparing the measurements by observer's eyes since they included different error sources. Further study is needed to assess the accuracy of LiDAR instrument for tree height through more reliable measurements.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.88-93
• /
• 2017

Policy maker inevitably faces two restraints once they attempt to accomplish $4^{th}$ Industrial Revolution through development of Industrial Internet of Things(i.e. IIoT). One is to construct physical network by substituting old equipment and infrastructure into smart equipment and the other is to connect the physical network into national telecommunications infrastructure. Australia, as she proceeds National Broadband Network programme, has assembled all medium of telecommunications to provide every Australian premises regardless to its physical location by creating wholes-sale only carrier, NBN co. At the same time, Australian government also provides its own IIoT policy; Co-development and New-Development projects. Meanwhile, NBN co. has launched its own two communication satellites in 2015 and 2016 to replace the old satellite communication services depended on the other companies' satellites. This article, in the end, analyses the role of satellite communication in $4^{th}$ industrial revolution with case study on Australian policy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.239-244
• /
• 2017

The demand for electric power is increasing every year. All facilities operating at power stations and all facilities used in transmitting high volumes of electric power are therefore expected to operate with a high degree of reliability. 6.6 kV XLPE 100 SQ 1C cables are used to deliver high levels of generated electric power. Depending on the method of manufacture, installation environment, and usage conditions, the deterioration processes of power cables start from the instant of operation. Cable junctions may break down in three years from the start of operation due to manufacturing or construction defects. We have invented the first device in Korea to monitor the status of live cables and installed these at Korea Western Power Co., Ltd.. We have set the criteria to determine deterioration status and specified the degree of deterioration at which one should replace the cables. In this paper, we present the effect of insulation layer and sheath on the insulation resistance status in cables.