The research was conducted to study the feeding value of crude soylecithin produced as by-products of soybean oil manufacturing in broiler ration. The results obtained were as follows. 1. The chemical composition, mineral composition, Vitamine contents and gross energy values of crude soy-lecithin were determined 2. No significant difference was observed for the body weight gain of broiler between control and lecithin groups of 3%, 6%, 9o/e and 12% addition. 3. Significant difference (P<0.05) was observed for feed intake lecithin 12% composed with lecithin 6% and 9% group, However, no significant difference was found among control, lecithin 3%, 6%, and 9% groups. 4. No significant difference was found for feed conversion between treatments. However, the lowest figure 2.32 for lecithin 9% treatments, followed by 2.40 of lecithin 6% and 2.41 of lecithin 3% orderly. 5. The composition of moisture, crude protein and ether extract in broiler carcas ranged from 71.2 to 72.15%, from 15.93 to 16.45% and from 6.19 to 7.05% respectively. 6. The weight of abdominal fat and live fat in broiler caress ranged from 42.4 to 63.7 gm, and from 2.2 to 2.4gm respectively. difference between abdominal and live fat weight was showing in significant statistically. 7. The present data reveal that soy-lecithin as by-product of soybean oil manufacturing was valuable energy source.
This study investigates changes of bifurcation discharge ratio, flow velocity distributions and characteristics of separation zone due to variation of bifurcation angle by using TELEMAC-2D model. When the bifurcation angle is reduced from 90° to 45° without changing the boundary conditions, the bifurcation discharge ratio increased by 1.5 times from 0.523 to 0.785 because of increasing the radius of curvatures, the inertia force of the downstream flow, and the pressure gradient by the downstream boundary conditions. The bifurcation discharge ratio increases non-linearly whenever the bifurcation angle decreases by 15° intervals from 90° to 45° in flow with the upstream Froude number of 0.45 to 0.74. In flow with a maximum Froude number of 0.74, the rate of increase for bifurcation discharge ratio is 31.1% and the minimum value. When the Froude number is 0.58, the bifurcation discharge ratio is 0.7 or less, and the maximum rate of increase for that ratio is 53.5%. As the upstream Froude number decreases less than 0.58, the bifurcation discharge ratio exceeds 0.7, and the rate of increase decreases. When the upstream Froude number is 0.4 higher, the dimensionless width and length changing ratio of the separation zone are about 2.56 and 5.5 times higher than in 0.4 or less.
The waste-water from the industry for production of a soybean curd (the soybean curd waste-water) was investigated to use for the substrate to produce the endotoxin of Bacillus thuringiensis subsp. kurstaki HD-1 used as one of well known microbial pesticides. The pH of the soybean curd waste-water was 9.8 and its chemical oxygen demand (COD), total nitrogen (TN) and phosphate (TP) were 276.0, 71.1 and 5.5mg/$\ell$, respectively. The higher was the concentration of the soybean curd waste-water in the medium, the more endotoxin was produced. Maximal sporulation occurred at which concentration of $K_2$HPO$_4$in the medium supplied with the soybean curd waste-water was 1% (w/v). Production of the endotoxin with the optimized medium supplied with the soybean curd waste-water was 1.5 times higher than that without the soybean curd waste-water. The soybean curd waste-water was found to be suitable substrate for production of the endotoxin of Bacillus thuringiensis subsp. kurstaki HD-1.
To concentrate polyunsaturated fatty acids from anchovy oil by supercritical carbon dioxide $(SC-CO_2)$, effects of different adsorbents, cosolvents and extraction pressures on the extraction yield and fatty acid composition in the extract and the residue fractions were investigated. Anchovy oil mixed with silver nitrate-coated silica gel showed higher extraction yield and concentration of EPA and DHA in the residual fraction than that mixed with only silica gel at $60^{\circ}C/345{\;}bar$. Ethyl acetate was a promising cosolvent for concentrating polyunsaturated fatty acids in the residual fraction from anchovy oil mixed with silica gel. For the extraction pressures tested, 276 bar showed a maximum value in the extraction yield and concentration of EPA and DHA in the residue. Starting with anchovy oil containing 13.3% EPA and 16.2% DHA mixed with a silver nitrate-coated silica gel, the residue fraction containing 28.2% EPA and 38.3% DHA was obtained when ethyl acetate was used as a cosolvent with $SC-CO_2$ at $60^{\circ}C/276{\;}bar$.
The duplex burnable poison absorbers concept was suggested by Korea Atomic Energy Research Institute. This BP rod is composed of inner region of natural U-Gd$_2$O$_3$ and outer shell of enriched UO$_2$-Er$_2$O$_3$. It is expected that this burnable absorber has same reactivity control capability with gadolinia burnable absorber used in extened fuel cycle. In order to evaluate the nuclear feasibility of duplex BPs, the nuclear design characteristics were compared with that of four types of burnable absorbers; gadolinia, erbia, IFBA, dysprosia duplex BP on 24 months fuel cycle for Korean Standard Nuclear Power plants. According to the evaluation results of nuclear characteristics, the duplex BPs were better than other BPs on k-infinitives, reactivity holddown worth (RHW), pin power peaking and moderator temperature coefficient (MTC). The possibility of nuclear core design was also confirmed based on the optimized fuel assemblies which were searched for a sensitivity analysis. Characteristics of core design with duplex BPs was compared with that of reference core with gadolinia BPs for cycle length, power peaking and MTC. The duplex BP core had a little longer cycle length by 4 to 7 days because of increased amount of fissile in enriched uranium at the outer shell of duplex BP In case of power peaking F$\_$Q/ of duplex BP core was reduced from 1.5773 to 1.5335. MTC was also less -0.48 pcm/C than that of reference core. Finally, evaluation of fuel cycle economy was performed for the manufacturing feasibility test and fuel cost evaluation with duplex BPs. Fuel cycle economy of duplex BP core almost was equivalent with that of gadolinia BP core.
Kim, Byung Ki;Ha, Jae Jung;YI, Jun Koo;Oh, Don Yep;Jung, Dae Jin;Hwang, Eun Gyeong;Choi, Seong Bok
The Korean Journal of Food And Nutrition
/
v.30
no.4
/
pp.703-709
/
2017
This study analyzed the effect on weight and average daily gain, carcass grade, and blood characteristics and immunity in case of dietary addition of pegmatite to Hanwoo steers. Relative to Hanwoo steers, initial body weight was $257.3{\pm}11.74kg$ (8-months old after birth). Forty-eight Hanwoo steers were fed for 24 months using random arrangement (4 treatment plots${\times}$4 heads${\times}$3 repeat). The treatment plot (498.75~500.82 kg) had higher weight during the early fattening stage compared with that of the control plot (474.37 kg) (p<0.05). Regarding total cholesterol of the blood, the value was similar to one during initiation of testing, but the value increased gradually based on the progress of fattening. In addition, the triglyceride was considerably low in T2~T3 plots with high addition of pegmatite during the late fattening stage compared with other treatment plots (p<0.05). This study revealed a tendency in the IgG content that represented immunity as the addition of pegmatite became higher (p>0.05). This study found that the treatment plot (441.55~452.10 kg) had higher carcass weight compared with the control plot (436.30 kg). However, this study revealed that the treatment plot (2.30~2.55 points) had higher carcass quantity grade compared with the control plot (2.11 points). This study found that the control plot (3.55 points) had higher carcass quality grade compared with the treatment plot (2.67~3.09 points) (p>0.05). With studies combined, it was determined that dietary addition of pegmatite to the feed as clay minerals in fattening Hanwoo steers would improve feed intake, body weight gain and carcass quantity grade.
Journal of the Institute of Electronics and Information Engineers
/
v.52
no.11
/
pp.3-11
/
2015
An advanced receiver which can manage inter-cell interference is required to cope with the explosively increasing mobile data traffic. 3rd Generation Partnership Project (3GPP) has discussed network assisted interference cancellation and suppression (NAICS) to improve signal-to-noise-plus-interference ratio (SINR) and receiver performance by suppression or cancellation of interference signal from inter-cells. In this paper, we propose the advanced receiver based on soft decision to reduce the interference from neighbor cell in LTE-Advanced downlink system. The proposed receiver can suppress and cancel the interference by calculating the unbiased estimation value of interference signal using minimum mean square error (MMSE) or interference rejection combing (IRC) receiver. The interference signal is updated using soft information expressed by log-likelihood ratio (LLR). We perform the system level simulation based on 20MHz bandwidth of 3GPP LTE-Advanced downlink system. Simulation results show that the proposed receiver can improve SINR, throughput, and spectral efficiency of conventional system.
This research starts based on the assumption that the changes of educational system in China which had been caused by accepting western educational system in the late Qing Dynasty and the early Republic of China are indeed considered as a paradigm shift of educational system in China, This research aims first to investigate what kinds of problems and changes Chinese educational system confronted at that time and second to examine what kinds of implications such changes and problems of paradigm shift may have today in China. In order to achieve the goals of this research, I first researched changes and characteristics of educational paradigm shift occurred in the history of China. On the basis of those findings, I tried to analyze acculturation problems of Chinese educational system for that of western countries at that time, their implications in present time Chinese educational system, and the possibility of further paradigmatic shift in present Chinese education. In this paper, I assumed three historical paradigmatic shifts in educational system in China which had big influences on the foundation of Chinese education, such as the introduction of Confucian Thoughts, the introduction of Civil Examination System in Sui Dynasty, and lastly the introduction of western educational system in the late Qing Dynasty. The last paradigmatic shift occurred by the introduction of western education system into China was very different from the previous two paradigmatic shifts in China in that it was literally initiated by the world with cultures different from those of China, and that's why it is called Spatial Collision. It was also one of the many changes China had been forced to confront unvoluntarily. It was done for many other complicated factors such as the greed of western imperialistic countries, spreading of Christianity and missionary education, domestic resistance against long feudal reigning of Qing Dynasty, and lastly the intellect's eagerness for new knowledge and new ways of thinking. What is surely regretful for the paradigmatic shift of Chinese educational system was that it had been triggered by those many heterogeneous factors, thereby leading to such a sudden, entire and complete shift of Chinese education system. In addition, it was done without a deeper and further consideration of Chinese education system with thousand years of tradition. This situation could be understood to be an impetus strong enough to encourage the advent of a new paradigm propelled by rapid economic growth of China, many problems of western education system, reconsideration of Chinese tradition, and strengthening of women power in China, etc.
This paper measures R&D efficiency and productivity changes of 24 nations including Korea, Japan and China by the non-parametric Malmquist productivity index. The principle findings of this study are as follows. First, R&D efficiency scores of Korea and Japan are 0.837 and 0.834 respectively. Meanwhile China shows 0.420, the worst performance among the selected countries. Second, Korea marked annual productivity increase of 25%, highest among the selected countries', for 2000-2005. R&D productivity in Japan and China, however, decreased 1.9% and 0.9% respectively. Third, annual rates of technology change and technical efficiency change in Japan are 0.6% and -2.5%. Therefore decrease of productivity in Japan is mainly due to technical inefficiency. In case of China, improvement of technical efficiency is the main contributor to productivity growth but technical progress has edged downward in the sample period. In Korea, with annual rate of technology change and technical efficiency change being 5.2% and 18.2% respectively, both efficiency improvement and technical progress has pulled the R&D productivity growth.
Proceedings of the Korea Water Resources Association Conference
/
2019.05a
/
pp.257-257
/
2019
최근 기후변화에 따른 대응을 위해 기존 수자원 활용의 고도화 및 배수능력 증대를 위해 다양한 방안이 추진되고 있으며, 그에 따라 기존 개수로에 신규 수로를 연결하여 합류와 분류를 시키는 사례가 증가하고 있다. 특히 신규 개수로 연결을 위한 분류부 형상은 관련 설계기준, 분류유량의 규모, 해당 지점의 하상변동 경향, 지형여건, 흐름 분류시설 및 구조물의 형태(양수펌프장, 스크린이나 수문, 암거설치)와 같은 구조적 요인 등에 의해 달라지지만, 이와 관련된 연구가 매우 부족한 실정이다. 따라서 본 연구에서는 2차원 수치모형을 이용하여 분류부 평면형상 변화에 따른 분류유량비와 흐름분리구역 분포 등에 대한 흐름특성을 분석하고 이수와 치수계획 수립 등에 활용하고자 한다. 본 연구에서는 TELEMAC-2D 모형을 이용하여 주수로 상류 유입흐름의 프루우드 수가 0.74, 0.52인 두 흐름에 대해 형상변화 폭을 주수로 폭(B)의 1B, 주수로 형상변화를 급확대, 점진적 확대 구간길이를 1B~3B로 변화시키며 분류유량비(분류수로 유입유량/상류 유입유량)와 흐름분리구역의 위치와 크기 등에 대한 분석을 수행하였다. 분류부 상류 유입흐름의 프루우드 수가 0.74, 분류유량비는 0.33인 흐름은 주수로 형상변화 구간길이가 1B 일 때 0.44~0.46, 3B일 때 0.54~0.60으로 점차 분류유량비가 증가한다. 반면 상류 유입흐름의 프루우드수가 0.52, 분류유량비가 0.52인 흐름은 주수로 형상변화 구간길이가 1B일 때 0.77~0.82에서 3B일 때 0.70~0.80으로 점차 분류유량비 증가율이 감소하는 경향을 나타내게 된다. 주수로 형상변화 폭을 0.5B, 1B로 달리하여 수로 형상변화를 시킨 경우 분류유량비 증가율은 각각 135~162%, 134~176%로 나타났으며, 이는 수로 형상변화 폭보다 변화구간 길이가 더 큰 분류유량비 변화에 영향을 미치는 것을 확인할 수 있다. 흐름분리구역은 상류 유입흐름의 프루우드 수가 0.74인 경우 수로형상 변화구간과 분류수로 입구에 형성되지만, 상류유입흐름의 프루우드 수가 0.52인 경우 수로형상변화 구간과 주수로 하류에도 형성된다. 수치실험 결과 동일수로 폭 직사각형 $90^{\circ}$ 분류수로에서 분류부 평면형상의 변화에 따라 주수로 하류방향흐름의 관성력은 감소하는 반면 분류수로로 향하는 횡압력경사와 흐름분리구역 발생위치 변화로 인해 분류 수로내 통수능이 증가하여 분류유량비가 급격하게 증가하게 된다. 또한 분류부 상류 유입흐름의 관성력이 작은 경우 분류부 평면형상 변화시 주수로 하류방향에서도 흐름분리구역이 형성되고 주수로 종방향 수위가 상승함에 따라 분류흐름 계획수립 시 세심한 주의가 필요하다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.