• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.203-207
• /
• 2012

Purpose: Electroretinogram(ERG) signal noise as well as conducting other bio-signal measurement were generated. It was intened to enhance the accuracy of retinal-related diagnosis with removing signal noise. Methods: Sampling signal was made with generating 60 Hz noise and white noise. The noise were removed using wavelet transforms and bandpass filter. De-noising frequency was compared with Fourier transform spectrum. Removed noises were compared numerically using SNR(signal to noise ratio). Results: The result compared Fourier transform spectrum was showed that 60 Hz noise removed completely and most of white noise was removed by wavelet transforms. 60 Hz and the white noise remained using bandpass filters. The result compared SNR showed that wavelet transforms was 22.8638 and bandpass filter was 4.0961. Conclusions: Wavelet transform showed less signal distortion in removing noise. ERG signal is expected to improve the accuracy of retinal-related diagnosis.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.148-150
• /
• 2002

In this paper, a 5-coupled BPF with teflon substrate is presented. In general, for less than 1 GHz frequency, the narrow bandwidth as well as the good characteristic in the rejection frequency band could be realized using lumped elements. However, for higher than 1 GHz frequency, the distributed elements such as microstrip lines need to be used for the design of the desired BPF For less than 2 GHz, the FR4 shows good filter characteristic at low cost. However, in the range of 2 GHz ~ 10 GHz, the filters with FR4 show a big difference between simulation and measurement results. Thus, in such a high frequency region, the teflon is more preferred to the FR4. The center frequency (fc) of the proposed filter is 2.3 GHz, the insertin loss (IL) is 1.2 dB, the return loss (RL) is 30 dB, bandwidth (BW) is 100 MHz, and the size is 8.3 cm $\times$ 4.9 cm.

• 한국ITS학회:학술대회논문집
• /
• v.2006 no.10
• /
• pp.187-190
• /
• 2006

In this paper, the equivalent circuit of tapped-line that is applied in the feeding of the band-pass filter with high coupling is suggested and the value of an equivalent circuit is mathematically defined. An equivalent circuit of tapped-line is composed by open stub and additional transmission line, and the electrical lengths of stub and line can be obtained by the impedance of resonator and the inverter. The new equivalent circuit of tapped-line can be simply applied of design of band-pass filter and leads to very good agreement compared with theoretical value. The coupled-line band-pass filter using equivalent circuit of tapped-line shows the insertion loss of 1.97 dB and the return loss of 18.5 dB at the center frequency of 5.8 GHz.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.11
• /
• pp.29-34
• /
• 1999

In this paper, a current comparative frequency automatic tuning circuit for the CMOS gm-C bandpass filters are designed with the new architecture. And also, when the designed circuit is compared to the typical tuning circuit, the designed circuit has very simple architecture that is composed of the current comparator and charge pump and operating in 3V power supply. The proposed tuning circuit automatically compensates the difference between the operating current of the transconductor and the specified reference Current. Using CMOS 0.8um parameter a biquad gm-C bandpass filter with center frequency($f_\circ$=60MHz) is designed, and according to the transistor size the variation of the center frequency is simulated. As the HSPICE simulation results, the tuning operation of the proposed current comparative frequency automatic tuning circuit is verified.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.3
• /
• pp.1-9
• /
• 2003

In this paper, we designed a highly suppressed sidelobe ladder type RF SAW bandpass filter based on 1-port resonator, for 800 MHz mobile communication system. In order to get the highest device characteristics, we optimized some important parameters such as the electrode thickness, electrode lambda weghting of the reflectors, and static capacitance ratio. Furthermore, we fabricated the Tx and Rx. filter using optimized parameters. Implemented filters can be used in 800 MHz mobile communication system and external impedance matching circuits are not needed. RF filter was fabricated on 36$^{\circ}$LiTaO$_3$ substrates with Al-Cu (W 3 %)and mounted 3.8mm$\times$3.8mm$\times$1.5mm SMD package. Developed filters has 2.3 dB insertion loss in the 25 MHz pass-band, 33MHz with 3-dB insertion loss, stop-band rejection of 30 dB, passband ripple is less than 0.5 The power durability of the filters measured about 3.5W and the maximum temperature variation within -2$0^{\circ}C$~8$0^{\circ}C$ was 0.09 dB/$^{\circ}C$ of 3-dB insertion loss.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.71-74
• /
• 2000

본 논문에서는 무선LAN용으로 사용할 수 있는 마이크로 스트립을 이용한 대역동과 필터를 설계하였다. 기존의 링이나 square loop의 구조를 이용한 공진기와는 다르게 cross loop 와 meander loop의 구조를 이용한 공진기를 혼합한 형태로써 크기가 상당히 줄어든 새로운 구조와 BandPass Filter를 설계하였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.687-687
• /
• 2006

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.988-996
• /
• 1998

BN ceramics with 0.07wt% $V_{2}O_{5}$ and 0.03wt% CuO(BNC3V7) sintered at $900^{\circ}C$ where it is possible for these to be co-fired with Ag electrode. Dielectricconstant of 44.3, TCF of 22 ppm$/^{\circ}C$ and $Qxf_{o}$ value of 22,000 GHz can be obtained from BNC3V7, multilayer type band pass filters using tapped method and conventional method were designed for PCS (Personal Communication System) applications. Tapped method by adopting input/output-tapping scheme the chip filter stucture becomes simpler and needs fewer layers than that using the conventional input/output-coupling scheme. A multilayer type band pass filter fabricated by screen-printing with silver electrode after tape casting. The simulated characteristics of the fabricated filters sintered at $900^{\circ}C$ were compared with the designed ones. Even though the centered frequencies of tapped and conventional band pass chaip filters were measured to shift about 90MHz downward, the band pass characteristics of both filters were similar that of designed ones. The spuriousresonance characteristic of tapped pass chip filter was better than that of conventional chip filer.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1411-1412
• /
• 2015

본 연구에서는 맥박 측정에서 생기는 잡음들 중 많은 오류를 생기게 하는 동잡음 개선을 위하여 회로를 제안하고 설계하였다. 기존의 맥박추정 장비에서 가변저항, 광원 스위칭, 디지털 필터를 사용함으로써 정확도 향상을 위한 연구를 하였다. 손가락에서 광전용적맥파를 측정시 측정부의 광원을 2개를 사용하고, 이를 스위칭을 통해 파형을 측정을 하였다. 실험에서 PPG의 측정은 반사형 방식을 사용하고 이를 광원스위칭을 통해 신호를 받아들였다. 이를 저주파통과필터와 고주파통과필터를 사용하여 0.5~5Hz대역을 필터링 함으로써 PPG이외의 잡음을 제거하고 신호를 검출하였다. 검출된 파형을 지수가중이중필터로 필터링을 함으로써 정확성을 높였다. 이를 통하여 광원스위칭을 통한 PPG의 출력과 발광다이오드 한 개를 사용한 출력을 비교 분석을 보여줄 것이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2233-2238
• /
• 2013

A novel design method of ultra wideband based on the composite right-/left handed (CRLH) transmission line is presented in this paper. Defected ground structure and microstrip interdigital coupler are used to implement the CRLH transmission line. The proposed CRLH transmission line in this paper have composite characteristics of low pass filter and high pass filter, also it has good advantages of low insertion loss and ultra wide passband characteristics. The structure with different cell number are studied, and the UWB filter using 3-cell CRLH transmission line is fabricated and measured, which shows a good agreement between simulated and measured results. It has center frequency of 5 GHz, fractional bandwidth of 105 %, and insertion loss of 0.7 dB at center frequency.