• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.20-40
• /
• 2003

Since unloaded Q-value of a high-temperature superconductor(HTS) filter is very high, a bandpass filter(BPF) and a lowpass filter(LPF) with an increase of pole numbers can be fabricated without an increase of an insertion loss(IL) ; recently a 70-pole BPF is developed in USA. They have an abrupt skirt property and an excellent attenuation level for out-of band. Moreover, they can be miniaturized when lumped element resonators or the slow-wave characteristic are used. Technology of fabricating a HTS epitaxial film as well as a film of a 4 inch area also makes the planar type filter with a various structure and an enhanced power handling capability possible. Recently, the HTS filter subsystems composed of a planar-type HTS filters, a GaAs-based LNA and a mini-cryocooler are developed. The extended receiver front- end subsystems for mobile radio communications decrease the noise-figure level of the communication system and the frequency interference interacted adjacent bands, and increase the efficiency of frequency and the capacity of communication system. In this paper, theory for developing the HTS filter, its kinds, its design rules, its characteristics are reviewed. The feature of the research and market trends related to the HTS filter systems for the receiver front-end subsystem of mobile base station are surveyed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.83-91
• /
• 2012

An RF energy detector for spectrum sensing in TV white space transceiver is presented. It is based on an RF active filtering technique that comprises a low-noise amplifier with a frequency-translation high-pass filtering feedfoward loop, which attenuates the unwanted sideband energy and only passes the wanted band energy. Unlike the conventional architecture, a new architecture that can attenuate both sidebands at the same time is proposed. A simplified system modeling method is presented to assess the non-ideality effects on the RF energy detector performances. System behavioral simulations demonstrate that the proposed architecture can be instrumental for realizaing a RF energy detector circuit in CMOS.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.7
• /
• pp.65-70
• /
• 2012

In this paper, a compact UWB (Ultra Wideband) BPF(Band-Pass Filter) with dual notched bands is proposed using a hybrid Composited Right-Left Handed (CRLH) and Defected Ground Structure (DGS). To avoid the interferences such as Wireless LAN (Center frequency: 2.4GHz and 5.8GHz), the CRLH is employed to obtain the dual notched bands and the DGS is used to obtain the wide stop-band above the pass-band. The fabricated filter has good performance and has more than 30dB rejection at the center frequency of 2.4 GHz and 5.8GHz. The dual notched bands are easily movable by changing the CRLH parameter. Also the insertion loss is less than 0.4dB in the lower pass-band and 0.7dB in the upper pass-band, and it has small group delay variation less than 0.6ns. The size of the fabricated filter is very compact (17mm*17mm).

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.23-30
• /
• 1999

In this study, we propose a new optimization algorithm for a withdrawal weighted SAW transversal filter to satisfy given, specifications such as bandwidth, ripple, insertion loss, and sidelobe rejection level. An analysis tool for the withdrawal weighted filter has been produced by means of the delta function model, and has been applied to the design of a filter consisting of an uniform input IDT and a withdrawal weighted output IDT. This optimization algorithm consists of three routines, which eventually determines eight design parameters to satisfy the performance specifications. At the first step, the number of input and output IDT fingers and their geometrical size are determined by the insertion loss specification. At the next step, the bandwidth is controlled by the change of the IDT finger position. Finally, the sidelobe rejection level is modified through the add/skip technique of IDT fingers. The algorithm in this paper is distinct from conventional techniques in that it can simultaneously consider all the specifications such as bandwidth, ripple, sidelobe rejection level and insertion loss, and optimize the geometry of the withdrawal weighted SAW filter.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.405-408
• /
• 2015

While the oversampling sigma-delta ADCs are known to have high resolution, they often suffer from SNDR losses when operated at a very high data clock. This paper presents a design and implementation of a decimation filter that provides minimum distortion at passband for high-speed sigma-delta ADC. The proposed digital decimation filter employs a butterworth structure, which is a type of an IIR filter. To evaluate the performance of the proposed decimation filter, we implemented a 1-bit, third-order, OSR=64 sigma-delta modulator followed by the proposed decimation filter. Using the simulation ad measurement, we compared the performance of the proposed decimation filter with a conventional CIC(cascaded integrator comb) decimation filter, which is commonly used in most sigma-delta ADCs. The measurement results show that the proposed decimation filter presents substantially lower distortion at passband and thus can provide must higher SNDR.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.34-41
• /
• 2006

This paper presents a CMOS multi-mode baseband filter architecture to support PDC/GSM/EDGE/WCDMA and its new automatic tuning method. 5-th order Chebyshev low pass filter is designed for implementing the baseband channel-select filter. Capacitors and resistors were shared efficiently between modes to minimize the area. And, the new cut-off frequency tuning method is proposed to compensate the process variation. This method can reduce the area and the noise level due to MOS switches.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.931-935
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic(LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. Inductive elements are designed in a low permitivity ceramic layer to reduce parasitic effects and loss, while capacitive elements are designed in a high permitivity ceramic layer for size reduction. The proposed filter has 950 MHz center &equency, 118 MHz tractional bandwidth, and 3.5 dB insertion loss. And, the total size of this filter is 2.5${\times}$2.5${\times}$l.4mm$^3$. The performance of filter is analyzed by changing coupling capacitance between each resonator.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.615-619
• /
• 2009

A real-time, continuous-scale image interpolation method is proposed based on bi-linear interpolation with directionally adaptive low-pass filtering. The proposed algorithm has been optimized for hardware implementation. The original bi-linear interpolation method has blocking artifact. The proposed algorithm solves this problem using directionally adaptive low-pass filtering. It can also solve the severely problem by selection choosing low-pass filter coefficients. Therefore the proposed interpolation algorithm can realize a high-quality image scaler for various imaging systems, such as digital camera, CCTV and digital flat panel display, to name a few.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.746-752
• /
• 2006

In this paper, a compact partial H-plane filter with periodic structure is proposed. Guided wavelength of periodic structure' is reduced by slow wave effect. Cross-section and length of partial H-plane filter with periodic structure are considerably reduced by 75% and 30%, respectively, as compared with conventional E-plane filter. In addition, spurious responses of the bandpass filter are improved. To design bandpass filter with periodic structure, we have analyzed a periodic structure of partial H-plane waveguide and derived equations of the periodic filter. Measured results are in good agreement with simulated results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.494-499
• /
• 2008

In this study, a Software Defined Radio(SDR) technology-based digital filtering technique applicable to a multiple channel processing system such as a wireless mobile communication system using Code Division Multiple Access(CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response(FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter(BPF) to reconfigure another system. The feasibility of the algorithm is verified by implementing a multiple channel signal generator that is reconfigurable to other system profiles, including those for a CDMA system and a WCDMA system on identical hardware platform.