• Korean Journal of Poultry Science
• /
• v.49 no.2
• /
• pp.61-67
• /
• 2022

The effects of dietary exogenous hydrophilic emulsifiers on the growth, nutrient digestibility, and carcass characteristics of broilers were evaluated. A total of 200 one-day-old broilers (Ross 308) were allotted to one of four treatment groups in a randomized complete block design in five replicates with 10 birds per pen during a 5-week growth experimental period. Birds were fed a corn-soybean meal-based diet with or without the addition of 0.025, 0.050, or 0.075% exogenous hydrophilic emulsifiers. The diets contained 3,025 and 3,075 metabolizable energy/kg for Phases 1 and 2, respectively. For each phase and the overall experimental period, body weight gain (linear, P<0.05) and feed conversion ratio (linear, P<0.05) improved in proportion to the dietary exogenous hydrophilic emulsifier level, while the average daily feed intake was not affected by dietary treatment. Improvement in growth performance by dietary treatments was observed during the last two weeks rather than the first three weeks of the growth phase. In carcass traits, abdominal fat content increased as dietary exogenous hydrophilic emulsifier level increased (linear, P<0.05), whereas dietary emulsifier level did not affect the relative weight of the liver, breast, and leg muscles. In conclusion, addition of dietary exogenous hydrophilic emulsifiers from 0 to 0.075% in broiler diets improved the growth rate and feed efficiency of broilers without any deleterious effects on nutrient digestibility, although a corn-soybean meal-based diet had less energy content (3,025 and 3,075 metabolizable energy/kg) for 0-3 weeks and 3-5 weeks, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.293-299
• /
• 2022

Recently, various stakeholder are interested in microplastic to cause pollution of the marine's ecosystem and effort to conduct study of product's life cycle to reduce pollution of marine's ecosystem. The micorplastic refer to materials of the nano- to micro- sized units and it can be classified into primary and secondary. The primary microplastic mean the manufactured for use in the specific field such as the microbead of the cosmetic or cleanser. also, secondary mean the unintentionally generated during use of the product such as the textile crumb by the doing the laundry. Tire and Road Wear Particles(TRWPs) are also defined as secondary microplastic. Typically, TRWPs are created by friction between the tread compound's rubber of the tire and the surface of the road du ring the driving cars. Most of the generated TRWPs exist on the roadside and some of them were carried to marine by the rainwater. In this study, we perform the quantitative analysis of the TRWPs existed in fine dust at the roadside. So, we collected the dust from the roadside in Chungcheongnam-do's C site with a movement of 1,300 cars per the hour. The collected samples were separated according to size and density. And shape analysis was performed using the Scanning Electron Microscope(SEM). We were possible to discover a lot of TRWPs at the fine dust of the 100 ± 20 ㎛. And we analysis it u sing the Thermo Gravimetric Analysis(TGA) and Gas Chromatography/Mass Spectrometer(GC/MS) for the quantitative components from the tire. As a result, it was confirmed that TRWPs generated from the roadside fine dust were included the 0.21 %, and the tire and road components in the generated TRWPs consisted of the 3:7 ratio.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.77-92
• /
• 2021

The energy density of lithium-ion batteries (LIBs) determines the mileage of electric vehicles. For increasing the energy density of LIBs, it is necessary to develop high-capacity active materials that can store more lithium ions within constrained weight. The rapid progress made in cathode technology has realized the utilization of the near-theoretical capacity of cathode materials. In contrast, commercial LIBs have still exploited graphite as active material in anodes since the 1990s. The most promising way to increase anodes' capacity is to mix high-capacity and long-cycle-life silicon oxides (SiOx) with graphite. However, the low initial Coulombic efficiency (ICE) of SiOx limits its content below 15 wt%, impeding the capacity increase in anodes. To address this issue, various prelithiation techniques have been proposed, which can improve the ICE of high-capacity anode materials. In this review paper, we introduce the principles and expected effects of prelithiation techniques reported so far. According to the reaction mechanisms, the strategies are categorized. Mainly, we focus on the recent progress of solution-based chemical prelithiation methods with commercial viability, of which lithiation reaction occurs homogeneously at liquid-solid interfaces. We believe that developing a cost-effective and mass-scalable prelithiation process holds the key to dominating the anode market for next-generation LIBs.

• Clean Technology
• /
• v.16 no.1
• /
• pp.51-58
• /
• 2010

Methane was produced from the anaerobic digestion of marine macro-algae. Elemental analysis was first performed to estimate the theoretical methane production of three macro-algae (Undaria pinnatifida, Laminaria japonica, Hizikia fusiformis). Three algae were found to contain C 34 ~ 36%, H 5%, O 37 ~ 43%, N 2 ~ 4%, S 0.4 ~ 0.7%, and ash 14~21%, and the theoretical methane content was in the range of 56 ~ 60%, which can produce 442 ~ 568 mL $CH_4$ per g of volatile solid (VS). Using the biological methane potential (BMP) test, we found that L. japonica resulted in the highest yield of methane (52%). Moreover, various operational conditions, such as algae amount, pH, salinity, particle size, and pre-treatment, were investigated in order to find an optimal condition of anaerobic digestion. At pH 8.0, the autoclaved L. japonica (5g VS/200 mL), when used without washing salt, produced 268.5 mL/g VS which is 65% of the theoretical methane productions. Furthermore, using a CSTR (with the working volume of 7 L out of the total volume of 10 L), we have successfully operated the reactor for 65 days and obtained maximum methane production rate of 1.4 L/day with purity of 70%.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.383-390
• /
• 2023

The goal of this study was to identify new bioactive peptides in extracts derived from Tenebrio molitor (T. molitor) larvae for the development of functional foods. After extraction from freeze-dried T. molitor larvae with various solvents on time course, the extracts showed the highest 2,2,1-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity at 5 and 10 hr per total protein and solid contents, respectively. When the water extract was fractionated, a high methanol concentration led to a reduced level of high-molecular-weight proteins in the centrifugal supernatant, whereas increased DPPH activity in the supernatants suggests low-molecular-weight peptides may mediate antioxidant activity in the supernatant. Most of the organic solvent partitions, excluding butanol, showed similar activities in the water phases, and the organic solvent partition fraction exhibited a 28~44% decrease in activity following heat treatment, implying that some components in the fraction become unstable in the presence of heat. The addition of proteinase K to the water extract increased DPPH activity by 10~20%, suggesting that peptides, when released from total proteins, partially increase antioxidant activity. Therefore, we suggest that the antioxidants in T. molitor larval extracts make them a potential source of functional animal food.

• Smart Media Journal
• /
• v.11 no.7
• /
• pp.76-84
• /
• 2022

In Korea, where rice is the staple food, there are many cases in which the nutritional composition of food is different at the same weight, even though the same ingredients are used and the food or food name is the same. The cause is closely related to the moisture content of the food according to the cooking method and cooking process. In order to design a diet tailored to individual health and supply accurate calories and nutrients, a method of expressing food data that is not affected by the cooking process or cooking method is required. Usually, the same ingredients or foods show a lot of deviation from the nutritional components presented in the standard food database due to the difference in moisture content. For this reason, there are problems that increase the complexity of the food ingredient database and the difficulty in using it. As a method to improve these problems, we would like to propose a food data expression method based on dry weight. As an example of this, the characteristics of rice as a food material and changes in major nutritional components according to the change in moisture of various rice-processed foods made from rice were considered. In addition, as an example of how to normalize food data through this, the dry weight-based nutrition label of rice was presented.

• Food Engineering Progress
• /
• v.23 no.4
• /
• pp.290-296
• /
• 2019

Rice in Korea is a highly valuable food resource that serves both as staple food and ingredient in various processed edibles. This study was conducted to explore pre-treatment methods for rice that result in good saccharification upon production of rice beer. When rice was subjected to fine grinding, steeping, roasting, gelatinizing, or puffing prior to saccharification with malt, wort containing puffed rice had the highest soluble solid content (°Bx). Upon production of wort without the addition of any enzymes for liquefaction or saccharification, the addition of 30% rice resulted in the highest soluble solid content (°Bx). Production of beer containing 10, 20, or 30% of either roasted or puffed rice showed that wort containing 30% puffed rice had the highest soluble solid content (15.4 °Bx) with good saccharification. The resulting beer likewise exhibited higher alcohol content (5.0-5.4%) than the beer that had roasted rice added, without the turbidity and with less bitterness. Therefore, rice puffing was considered a beneficial processing method to enhance rice saccharification and to facilitate both the production of fine quality beers and rice beer containing puffed rice.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.161-172
• /
• 2024

This study investigated the anti-obesity effects of lactic acid bacteria ferments cultured in industrial medium with ethanol extract of ramie leaf (Boehmeria nivea L.). On the 4th day of fermentation, the maximum live cell counts were 8.75-8.85 log CFU/mL, pH was 3.74-3.79, and total acidity was 2.07-2.19%. The fermentation of lactic acid bacteria on the fourth day resulted in the amount of lactic acid reaching 1,676.03-1,910.12 mg%. The lipase inhibitory activities of Lactiplantibacillus plantarum (L. plantarum) JBLAB0101 (FRLPLA) and Lactobacillus rhamnosus GG (LGG, (FRLLGG)) ferments were 30.10%, and 25.63%, respectively, at a concentration of 0.5 mg/mL. The lipid accumulation, leptin production, PPAR-γ and SREBP-1c mRNA levels were decreased to 37.54%, 54.64%, 24.18%, and 31.32%, respectively, at 200 ㎍/mL concentration of FRLPLA. These results suggest that anti-obesity effect could be increased by lactic acid bacteria in industrial medium with extract of ramie leaf.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.25 no.4
• /
• pp.84-89
• /
• 2024

Light is an important component among which plays a crucial role in determining the production and quality of fruit trees. Since the disturbance of light directly leads to reduced photosynthetic efficiency, their damage can be increased especially in fruit trees such as Japanese apricots with a short growing time. In this study, we investigated how the effects of shading condition can affect the production and quality of Japanese apricots according to increased damages by light disturbance in the main orchard complex. The average photosynthetically active radiation (PAR) level in Japanese apricots was rapidly dropped as the shading time was increased compared to the control (304 μmol/m²/s) and the PAR level decreased to 142 μmol/m²/s after shaded for eight hours. The maximum photosynthetic efficiency, with a PAR value of 900 to 1,000 μmol/m²/s, corresponds to the time period without shading and the time period with 2 hours of shading, and these times range from 11 a.m. to 3 p.m. And the time period for shading for 4 hours was from 1:00 p.m. to 2:00 p.m., and under conditions of shading for 6 and 8 hours, the effect was a low amount of light. There was no difference in the weight of Japanese apricots during 2 hours shading time, however, it was significantly reduced as shading time were increased. The difference of the acid content and L/D ratio was not significant on shading time, but the SSC was decreased as times going on. In conclusion, our results indicate that the shading for more than 2 hours make negative effects to decrease the weight and SSC and the yield and affects directly to drop in fruit quality.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.336-341
• /
• 2023

This study examines the characteristics of berries from secondary bearing shoots of 'Scintilla' southern highbush blueberry, grown hydroponically in the Jinju, Gimhae, and Uiryeong regions of Gyeongnam Province. Typically, 'Scintilla' forms flower buds at the tips of regular bearing shoots during the previous season, yielding berries in the current season. However, under heated cultivation, we observed a proliferation of secondary bearing shoots that produce berries in the same growing season. Flowering and harvesting on secondary bearing shoots were delayed by 52 and 36 days, respectively, compared to regular bearing shoots. However, these shoots exhibited a 54% increase in diameter and a 10% increase in length. We found no significant difference in berry size and soluble solid content between the two types of shoots. Notably, berries from the secondary bearing shoots had higher potassium and lower calcium and magnesium concentrations. We conclude that berries from secondary bearing shoots could be marketable, provided the bushes are healthy. These findings provide valuable insights for optimizing cultural practices to improve the yield and quality of blueberries under specific environmental conditions.