• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4057-4064
• /
• 2014

In this paper, attempts were made to design a preform for a final punch inexpensively using the proposed approximate optimization method or metamodel-based simulation optimization. The design objective of this work is to achieve a uniform distribution of effective strains, the angle dimension of the preformed punch is chosen as a design variable, and maximum underfill ratio is used as a constraint. For this optimization, a computer simulation of a practical punch forging process is run using DEFORM software, in which a preformed punch(workpiece), a master punch(upper die), and a bottom die are dealt with. A validation method is introduced to determine if the simulation results match the actual forging process. In addition, this work presents the detailed design optimization procedure consisting of (i) generation of an initial metamodel, (ii) metamodel optimization, (iii) validation of metamodel-predicted optimum, and (iv) metamodel improvement.

• Fire Science and Engineering
• /
• v.20 no.4 s.64
• /
• pp.19-25
• /
• 2006

In this paper, a new design of the sprinkler branch outlet for fire-extinguishing purposes is presented together with its manufacturing process. The conventional three-piece design is improved by a new one-piece design with the help of the manufacturing technology of cold forging. The forging process is simulated and optimized by the rigid-plastic finite element method and the design tryouts are thus minimized. It has been shown through its applications that the presented system is much more economical and structurally stronger.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.06b
• /
• pp.147-160
• /
• 1999

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.06a
• /
• pp.25-32
• /
• 2000

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.251-261
• /
• 2022

This paper describes the finite element analysis and die design change of spring retainer forging process to reduce the cold forging load and plastic forming stress concentration. Plastic deformation analysis was carried out in order to understand the forming process of workpieces and elastic stress analysis of the die set was performed in order to get basic data for the die fatigue life estimation. Cold forging die design was set up to each process with different four types analysis progressing, the upper and lower dies shapes with combination of fillets and chamfers shapes of cold forging dies. This study suggested optimal cold forging die geometry to reduce cold forging load. The design parameters of fillets and chamfers are selected geometry were selected to apply optimization with the DoE (design of experiment) and Taguchi method. DoE and Taguchi method was performed to optimize the workpiece preform shape for spring retainer forging process, it was possible to expect an increase in cold forging die life due to the 20 percentage forging load reduction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.90-93
• /
• 1999

In this paper a local remeshing technique assisted by user-interface capabiities is presented for precise forging simulation. The rigid-plastic finite element formulation is introduced and the basic approach to the new local remeshing technique is presented. A piercing process in cold forging is simulated by the presented technique and the results are compared in detail.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.474-477
• /
• 2009

In this paper, flow stress of Al6061 is obtained by compression test in the range of temperature from $300^{\circ}C$ to $550^{\circ}C$ and effective strain-rate from 0.1/s to 20.0/s. The flow stress information is used to simulate an aluminum hot forging process. Non-isothermal simulation is carried out by a rigid-thermoviscoplastic finite element method. The predictions are compared with the experiments in terms of the deformed shape of material.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1487-1492
• /
• 2007

In this paper, we apply a forging simulator to automatic simulation of a connecting-rod forging process and compare its results with others found in the literature. The process information comes from the distributed examples of DEFORM3D. The process is fully automatically simulated using the tetrahedral element capability of AFDEX3D, developed by the authors. Our results are compared with the results found from the related literature, already simulated using DEFORM3D by other researchers. The comparison shows that our results are relatively excellent especially in terms of mesh quality on which the solution accuracy depends mainly.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1637-1641
• /
• 2007

In this paper, we simulate a rotor pole cold forging process by a forging simulator with both tetrahedral and hexahedral element capabilities and compare the predictions obtained by the two approaches with the experiments. Hexahedral element capability runs manually while tetrahedral element capability runs automatically with help of an intelligent remeshing technique. It is shown that the tetrahedral element capability can give quite accurate solution if assisted by the intelligent remeshing technique even though the tetrahedral element itself is not theoretically and numerically clear.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.314-319
• /
• 2016

Flange bolt has a circular flange under the head that acts like a washer to distribute the clamping load over a large area. Flange bolt has usually been manufactured by cold forging. Flower shape defect occurs in the flange forging stage. This defect causes lack of dimensional accuracy and low quality. So it is needed to improve these forging defects. In this study, die design method for flower shape defect of flange bolt was suggested. In order to improve flower shape defect, inner diameter of the addition die in conventional forging process was modified. The forging process with applied modified die was simulated by commercial FEM code DEFORM-3D. The simulated results for modified die were confirmed by experimental trials with the same condition.