• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.24-31
• /
• 2015

효소는 생명 현상을 구현하는 단백질 촉매인데 그 동안 효소의 촉매 반응 속도는 Michaelis-Menten(MM) 모델로 대부분 설명되어 왔다. 그러나 MM 모델은 실험으로 측정된 단일 효소 반응시간의 확률분포 모양을 설명할 수 없다. MM 모델에 반응계수의 정적 무질서 개념을 도입한 효소 반응 모델도 기질 농도에 따라 변화하는 효소 반응시간의 통계적 요동을 설명하지 못한다. 우리는 단일 효소 반응시간의 통계적 요동이 기질에 따라 변화하는 양상을 설명하기 위해 효소 반응을 구성하는 개별 화학반응을 단순히 푸아송 과정이 아닌 갱신과정(renewal process)으로 확장한 효소 반응 모델을 제안한다. 우리는 이 단일 효소 반응 모델과 기질에 따른 효소 반응시간 분산 변화 데이터를 비교하여 효소-기질 복합체의 지속시간 분포를 간단한 형태로 얻어내었다. 또한, 이 정보를 토대로 전산모사를 수행하여 효소 반응시간의 확률분포를 얻어내고, 실제 실험 결과 및 기존 이론들과 비교하였다. 뿐만 아니라 단일 효소 반응시간의 확률분포를 연속 시간 임의의 보행자(continuous time random walker)의 대기시간 확률분포(waiting time distribution)로 대응하면, 평균 제곱 변위가 시간에 따라 단순히 증가 하지 않는 고분자의 특이 수송(anomalous diffusion) 현상도 정량적으로 설명할 수 있었다.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.101-109
• /
• 2013

Diels-Alder 반응은 유기합성에서 중요하게 다뤄지는 고리형성 반응으로 위치 선택성과 더불어 단일 단계 반응이기에 특이한 입체 선택성을 갖는 것으로 알려졌다. 그러나 실제로는 단계적 반응 경로도 존재할 수 있음을 발견하였는데, 이 경우에 갖는 위치 선택성과 입체 선택성은 달라질 가능성이 높다. Density Functional Theorem(DFT)로 계산한 결과, 비대칭 Diels-Alder 에 대해 단계적 반응의 경우에도 마찬가지로 유사 ortho 형태에 endo 지향성을 나타내었지만 대칭 Diels-Alder 반응에 비해 단계적 반응이 일어나기 힘들다는 결론을 얻을 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.146-149
• /
• 1980

Oxodipyrromethene was degraded by a self-photosensitized reaction, similar to the degradation of bilirubin by other investigators. Photodegradation of oxodipyrromethene was faster in methanol-d4, in which the life time of singlet oxygen is longer, than in methanol. It was slower in a solvent which contained a singlet oxygen quencher. Moreover, the products from sensitized and unsensitized reactions are same.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.467-476
• /
• 1999

This paper analyzed the behavior of fixed-bed catalytic reactor (FBCR) which synthesizing maleic anhydride(MA) from the selective oxidation of n-butane. The behavior of FBCR describing convection-diffusion-reaction mechanism is examined by using two-dimensional pseudohomogeneous plug-flow transient model, with the kinetics of Langmuir-Hinshelwood type. Prediction model is composed by optimum parameter estimation from temperature profile, yield and conversion of single FBCR on operating condition variations of Sharma's pilot-plant experiment. A double FBCR with same yield and conversion for single FBCR generated a $8.96^{\circ}C$ lower hot spot temperature than a single FBCR. We could predict parametric sensitivity according to the variation of possible operating condition (temperature, concentration, volumetric flow of feed reactant and coolant flow rate) of single and double FBCR. Double FBCR showed the behavior of more operating range than single FBCR. Double FBCR with nonuniform activities could assure safety operation condition for the possible variation of operating condition. Also, double FBCR had slightly higher than the single FBCR in conversion and yield.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.209-209
• /
• 2013

그래핀(graphene)의 가장자리(edge)는 결정구조의 배향성에 따라 지그재그(zigzag)와 안락의자(armchair) 형태로 구분되는데, 나노미터 크기의 그래핀의 전자적 성질은 이러한 가장자리의 배향성에 의해 크게 영향을 받는다고 알려져 있다. 단일층 그래핀 가장자리 사이에서 일어나는 산화실리콘($SiO_2$)의 carbothermal reduction은 선택적으로 지그재그 형태의 가장자리를 생성한다고 알려져 있다. 본 연구에서는 라만 분광법과 원자 현미경(atomic force microscopy)을 이용하여 기계적 박리법으로 만들어진 이중층 그래핀에서 일어나는 carbothermal reaction을 연구하였다. 고온 산화 방법으로 이중층 그래핀에 원형 식각공(etch pit)을 만들고 Ar 기체 속에서 700도 열처리를 진행한 후, 원형 식각공이 육각형으로 확장된 것을 관찰하였다. 이것은 이중층 그래핀도 산화실리콘의 carbothermal reduction을 유발한다는 사실을 보여준다. 그러나 이중층 그래핀의 반응속도는 단일층보다 5배 정도 느린 것이 확인되었는데, 이는 이중층 그래핀의 탄소원자와 산화제로 작용하는 산화실리콘 간의 평균 거리가 단일층보다 더 크다는 사실로 설명할 수 있다. 또한 단일층과 이중층 그래핀 모두 1 기압 Ar 분위기에서보다 진공상태에서 반응속도가 현저히 작다는 사실이 관찰되었다. 진공도와 온도에 따른 반응속도로부터 반응 메커니즘 및 활성화 에너지에 대해 고찰하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.27 no.1
• /
• pp.1-8
• /
• 1983

Solvent effects on nucleophilic substitution reaction of naphthalene sulfonyl chlorides with pyridine in protic and aprotic solvent have been studied by means of conductometry. Results showed that the rate constants increased with dielectric constants for protic solvents, while they decreased with dielectric constants for aprotic solvents, except for acetonitrile which has a higher dielectric constant but had also greater rate constant. The rate constants were shown to be more susceptible to polarity-polarizability parameter, , than to hydrogen bond donor acidity parameter, ${\alpha}$, indicating that the pulling effect of hydrogen bonding solvent.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.269-272
• /
• 2009

Catalytic decomposition of nitrous oxide was investigated experimentally. Two noble metal catalyst (Pt, Ir) were chosen to decompose nitrous oxide. Each catalyst was tested with different chamber pressure and preheating temperature. Ir decomposed $N_2O$ at lower temperature ($230^{\circ}C$) and suitable for $N_2O$ decomposition. In addition, the minimum required preheating temperature decreased as the chamber pressure increased. However, deactivation of Ir catalyst was observed during the experiments.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.49-52
• /
• 2009

The response times of monopropellant thrusters at a pulse mode were investigated experimentally as design parameters and feed pressure conditions. Five different model thrusters as injection direction/uniformity, aspect ratio of reactor, volumes of manifold and chamber were designed. As a results, two parameters, aspect ratio and manifold volume, were directly related to response characteristics. Additionally, chugging instability at reaction chamber was observed when pressure drop across the catalyst bed was increased due to high aspect ratio or when low pressure was built at reaction chamber.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.368-375
• /
• 2006

Single and complex metal oxide catalysts supported onto a commercial DT51D $TiO_2$ have been investigated for gas-phase TCE oxidation in a continuous flow type fixed-bed reaction system to develop a better design approach to catalysts for this reaction. Among the $TiO_2$-supported single metal oxides used, i.e., $CrO_x,\;FeO_x,\;MnO_x,\;LaO_x,\;CoO_x,\;NiO_x,\;CeO_x\;and\;CuO_x$, with the respective metal contents of 5 wt.%, the $CrO_x/TiO_2$ catalyst was shown to be most active for the oxidative TCE decomposition, depending significantly on amounts of $CrO_x\;on\;TiO_2$. The use of high $CrO_x$ loadings greater than 10 wt.% caused lower activity in the catalytic TCE oxidation, which is probably due to production of $Cr_2O_3$ crystallites on the surface of $TiO_2$. $CrO_x/TiO_2$-supported $CrO_x$-based bimetallic oxide catalysts were of particular interest in removal efficiency for this TCE oxidation reaction at reaction temperatures above $200^{\circ}C$, compared to that obtained with $CrO_x$-free complex metal oxides and a 10 wt.% $CrO_x/TiO_2$ catalyst. Catalytic activity of 5 wt.% $CrO_x-5$ wt.% $LaO_x$ in the removal reaction was similar to or slightly higher than that acquired for the $CrO_x$-only catalyst. Similar observation was revealed for 5 wt.% $CrO_x$-based bimetallic oxides consisting of either 5 wt.% $MnO_x,\;CoO_x,\;NiO_x\;or\;FeO_x$. These results represent that such $CrO_x$-based bimetallic systems for the catalytic TCE oxidation on significantly minimize the usage of $CrO_x$ that is well known to be one of very toxic heavy metals, and offer a very useful technique to design new type catalysts for reducing chlorinated volatile organic substances.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.1
• /
• pp.18-26
• /
• 2007

A development of monopropellant thruster for microsatellite that uses concentrated hydrogen peroxide is described. Catalyst, the most important component in the thruster, was prepared and coated on a monolith honeycomb. Performance evaluation of thruster was peformed by considering the efficiency of characteristic velocity and ignition delay. As a result, 96.0% of $C^*$ efficiency was obtained at designed propellant flowrate and steady state operating condition.