• Magazine of the Korea Concrete Institute
• /
• v.11 no.4
• /
• pp.61-67
• /
• 1999

물론 이 글이 콘크리트 분야에 종사하는 사람이 알아야 하는 모든 것을 언급하지는 않는다 ; 본인의 저서 'Properties of Concrest'의 판매에 나쁜 영향을 주고 싶지도 않다. 내가 원하는 것은 콘크리트를 제작할 때 우리 모두가 주의를 기울여야 하는 중요한 몇 가지를 강조하는 것이다. 포트랜드 시멘트만 들어있는 보통의 콘크리트가 사용되는 시대는 이미 사라져가고 있고, 단순한 응용을 제외하고는 곧 사라질 것이다. 대부분의 경우는 가능한 일련의 시멘트계 재료 중에 선택을 해야 한다. 혼화제, 특히 고성능 감수제는 중요한 역할을 한다. 물을 많이 첨가하는 것이 작업성을 높이는 유일한 방법도 아니고 최선의 방법도 아니다. 성능을 기준으로 한 기준설정에 관여하는 사람은 이 모든 것을 명심해야 한다. 그렇지 않으면 시방기준에 명시된 규정과 근원적인 요구사항이 잘못 이해되고, 시험배합을 통해서만 잘못되었다는 것이 분명해지게 된다. 그 단계에서는 예상보다, 비록 틀린 것이지만, 더 많은 비용이 들 것이다. 시방규정은 통상적인 조항 외에 갈수록 내구성에 관심을 더 많이 보인다. 가끔은 내구성이 구조물의 기대수명에 대한 연수로 표현되기도 한다. 이 숫자를 배합재료에 관한 자료로 변환시키는 데는 여러 배합재료 및 배합비가 콘크리트의 성질에 미치는 영향에 관하여 깊이 알고 있어야 한다. 모든 사람이 그러한 구체적인 지식을 가질 필요는 없지만, 각 조직마다 상의할 수 있는 사람은 있어야 한다. 엔지니어가 언급한 규정이 따로 없고, 도면의 주를 참고하거나 구체적인 절이 명시되지 않은 상태에서 국가 시방기준을 통해서 조금씩 내용을 수집해야 하는 경우의 상황은 더 난감하다. 이러한 경우는 배합설계나 재료의 선택을 책임지고 있는 사람이, 환경에 대한 노출조건 및 필요한 배합재료에 관하여 잘 알고 있어야 한다. 일반적으로 말해서 콘크리트의 배합은 필요한 특정용도에 따라서 선택되어야 한다. 이것이 사람들이 고성능 콘크리트라 부르는 것이라고도 할 수 있다. 내 생각으로는 고성능 콘크리트와 보통 콘크리트의 경계는 곧 사라질 것이고, 앞으로 대다수 고객에게 주문 콘크리트 혹은 맞춤 콘크리트를 제공해야 할 것이다. 만약 이러한 접근방식에 더 많은 비용이 든다면, 그것을 보상하는 방법은 콘크리트에 대한 이미지를 높이고, 또한 앞으로 모든 용도에 계속적으로 이용될 수 있도록 하는 것이다. 아니면 구조물을 보수하고, 보수한 것을 또 보수하고, 해체하고 해야 할 것이다. 결국은 재활용 골재를 생산할 수 있다고 웃으면서 말할지 모르지만, 이런 식으로는 불만을 지닌 사용자가 콘크리트를 가능하면 멀리하게 만들 것이다. 콘크리트는 절대 심각한 경쟁에 처하지 않을 것이라는 가정은 무모하다. 내가 배합비에 대해서 강조해 왔지만, 이것으로 최종적으로 좋은 콘크리트가 된다는 보장은 없다. 비빔에서는 일반적으로 큰 문제는 없지만 골재에 함유된 수분을 더 잘 제어해야하고 주의를 게을리하지 말아야 한다. 비빔시간은 모든 재료가 잘 섞이기에 충분해야 하는데, 마이크로 실리카가 포함되어 있을 경우에는 더욱 그렇다. 단위시간당 믹서의 작업량을 높이기 위해서 충분히 비비지 않아서는 안된다. 그리고 마지막으로, 콘크리트가 타설되고 다져진 후, 적절하게 양생이 되어야 한다. 마이크로 실리카가 배합에 사용되었을 경우에는 특히 그러하지만, 이것은 모든 콘크리트에서 양생을 잘하는 것이 피복부에서 유해물질이 유입되는 것을 최소화하고 철근을 완전히 보호하는데 있어서 절대적이다. 내가 지금까지 말한 것은 콘크리트에 관한 충분한 지식과 이해를 필요로 한다. 이것은 당연하고 또한 적절한 것이라고 생각한다. 왜냐하면 더 이상 콘크리트를 수준낮은 싸구려 재료로 간주해서는 안되기 때문이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.1916-1932
• /
• 1997

The synchronous stream cipher which require absoulte clock synchronization has the problem of synchronization loss by cycle slip. Synchronization loss makes the state which sender and receiver can't communicate with each other and it may break the receiving system. To lessen the risk, we usually use a continuous resynchronization method which achieve resynchronization at fixed timesteps by inserting synchronization pattern and session key. While we can get resynchronization effectively by continuous resynchroniation, there are some problems. In this paper, we proposed an adaptive resynchronization algorithm for cipher system using HDLC protocol. It is able to solve the problem of the continuous resynchronization. The proposed adaptive algorithm make resynchronization only in the case that the resynchronization is occurred by analyzing the address field of HDLC. It measures the receiving rate of theaddress field in the decision duration. Because it make resynchronization only when the receiving rate is greateer than the threshold value, it is able to solve the problems of continuous resynchronization method. When the proposed adaptive algorithm is applied to the synchronous stream cipher system in packet netork, it has addvance the result in R_e and D_e.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1134-1138
• /
• 2010

호소의 수질오염 문제를 해결하기 위해선 우선 소하천에서 강우유출에 의한 비점오염물질이 어디서 얼마나 발생하는지에 대한 정량적인 조사가 필요하다. 그러나 유역의 오염원에 대한 정량적인 조사가 이루어지려면 많은 비용과 시간 그리고 노력이 필요하다. 따라서 본 연구에서는 대청호 상류유역의 소하천인 안내천을 대상으로 강우유출수 조사를 실시하고, 높은 예측 정확성 때문에 세계적으로 널리 쓰이고 있는 Long-Term Hydrologic Impact Assessment(L-THIA)을 이용하여 실측데이터와 L-THIA 모델의 결과를 비교하였다. 안내천의 유역면적은 16.5 $km^2$로 유역의 약 69.5%가 산림, 농업 및 초지지역이 25.3% 그리고 주거지역이 2.6%로 조사되었다. 수질분석을 위하여 자동수질시료채취기(ISCO sampler 6712)를 설치하여 시간단위의 시료를 채취한 뒤 수질농도를 측정하였다. 수질항목은 유기물질인 $BOD_5$, TOC, T-N, T-P 항목에 대하여 수질오염 공정시험법으로 분석하였다. WHAT 시스템을 이용하여 분리된 직접유출량은 315.5~161,835.1 $m^3$의 범위로 나타났다. 직접유출량을 이용하여 산정한 유역의 EMC 농도는 안내천 유역의 $EMC_{BOD}$는 1.0~2.4 mg/L, $EMC_{TOC}$는 1.429~5.491 mg/L, $EMC_{COD}$는 2.2~10.2 mg/L, $EMC_{TN}$은 2.906~10.864 mg/L, $EMC_{TP}$는 0.029~0.285 mg/L의 범위를 보였다. 또한 실측된 유량과 농도를 이용하여 산정한 오염부하는 안내천 유역이 $BOD_5$ 37.9~390.9 g, $COD_{Mn}$ 0.8~1,657.5 g, TOC 0.54~791.83 g, T-N 0.968~1,758.174 g, T-P 0.011~42.139 g의 범위로 나타났다. L-THIA 모델을 이용하여 직접유출량의 산정된 결과와 실측 결과를 비교 분석한 결과 결정계수와 유효지수가 0.95와 0.93으로 높게 나타나 대청호 상류유역에서 발생하는 유출량을 모의하는데 적절할 것으로 판단된다. 토지이용도와 토양도 그리고 일 강우자료만으로 구축되는 L-THIA 모델을 이용하여 대청호 상류의 소하천 유역에 대하여 비점오염원 유출특성을 해석하는 것이 가능 할 것으로 판단된다.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.148-153
• /
• 2005

With the increase in the level of national income, the interest and demand of the wild edible plants have been increased. Aralia elata Seem is highlighted as a new income source for farmers in Korea. This study was conducted to determine the optimum planting density enhancing the commercial yield and quality in Aralia elata Seem. Yield of new shoots per 10a was increased in the dense planting of $1m\times30cm$ by three years of planting, but it was decreased after four years of planting, which was mainly caused by the factors such as high mortality rate. The income per 10a in the planting density of $1m\times50cm$(2,000 plants/10a) was higher by $27\%$ than that in the planting density of $1m\times30cm$(3,300 plants/10a) which was 968,00won per 10a.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.26-31
• /
• 1994

This experiment was conducted to study the effect of growth characteristics and yield by different planting density on Ligusticum chuanxiong Hort.Number of stem, leaf and branch on main stem were plant reduced by increasing the plant density. Stem height was showed the highest at $50{\times}15cm$ planting density, but diameter did not show significant difference at different planting density. Stem number in $m^2$ of field area showed negative correlation with leaf number and branch number on main stem. The height of first branched node became longer by increasing stem number, leaf number and branch number on stem in $m^2$ of field area. Rhizome yield showed negative correlation with stem number and leaf number per plant, but showed positive with stem number in $m^2$ of field area leaf number and branch number of main stem. Root and rhizome weight per plant decreased by increasing planting density, but root and rhizome yield in $m^2$ of field area were increased by high planting density.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.301-309
• /
• 2017

This study analyzed the effect of cooperation activities among SMEs. In order to study empirical analysis, we classified the types of cooperation into four dimensions: technology cooperation, human resource cooperation, sales cooperation and financial cooperation. Review the role of the collaborative philosophy as a predictor. This study also analyzed the relationship between cooperation philosophy, cooperation activities and performance. The results of this study are as follows: First, the result of path analysis between cooperation philosophy and cooperation activities shows that cooperation philosophy has an important influence on technical cooperation, human resource cooperation, sales cooperation and financial cooperation. Second, the results of the relationship between cooperation activities and achievements, technical cooperation, human resource cooperation, and sales cooperation have an important influence on cooperation performance. The meaning of this study is as follows. Analyze empirical tests using the PSBP model from a partnership perspective. We are trying to verify the relationship with SMEs. Therefore, we can suggest a beneficial implication to explain the importance of cooperation activities between SMEs. Also, SME business units have a problem with technical information leakage when they form partnerships, but in order to overcome this problem, we can use cooperative philosophies and avoid negative views.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.198-208
• /
• 2011

When a structure which has relatively low load constructs on soft clay, the bearing capacity of the ground will be improved by sand overlying clay. In this condition, verifying the bearing capacity is difficult from the P.B.T etcetera in the in-situ. So, it is needed to estimate precise bearing capacity in the design process. In this study, 2-dimensional chamber tests and FEM analyses are conducted to evaluate behavior of bearing capacity for shallow foundations on a sand overlying clay. Because depth ratio H/B and bearing capacity ratio $q_c/q_s$ are selected as main factors, height of a sand, undrained shear strength of a clay and width of a loading are designated as variables. Results from chamber tests are very similar with those of FEM analyses. And it shows that punching shear mechanism is more suitable than the equation of Okamura et al.(1998). To make continual application of load spread mechanism, the equivalent load spread angle is proposed for H/B and $q_c/q_s$. Also, the linear regression equation of critical depth ratio Hf is suggested for $q_c/q_s$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.443-451
• /
• 2020

A futuristic locomotion system called Hyperloop is projected for driving at ulta-high speed, levitated in the tube. In hyperloop localization of pods on the linear synchronous motor is essential for pod driving. precision localization is required for acceleration and deceleration of pods driving at speed above 1,000km/h, and also required for adjusting the pod speed driving at this very-high speed to maintain inter-vehicle distance. In this work, a new scale of localization is challenged by modified laser surface velocimeter. In acceleration the speed of a virtual pod is calculated along its displacement measured by laser reflection. Under the requirement of precise localization of the pod driving at ultra-high speed, a displacement measurement device, which detects the difference in reflections from tiles passing by the pod, is developed and evaluated through performance test. Tests of pod speeds below 500km/h have showed exact localization results of the precision in centimeters, and tests of pod speeds above 500km/h have showed localization with very low error rates under 0.1%. For the measurement above 500km/h, future works would pursue the error rate converges to zero.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.4
• /
• pp.128-135
• /
• 2016

In the current concrete structure of the highway is still the major problem most of concrete deterioration caused by the freeze-thaw and deicing salt, which is of issues that are not completely resolved. In particular, a single freezing event does not cause much harm, durability of concrete under multi-deterioration environment by repeated freeze-thaw and deicing salt is rapidly degraded and reduce its service life. In this study, the exposure environmental condition according the regional highway points were established. The damage condition and chloride content of the concrete at general and severe environmental exposure condition were also investigated. In addition, the experimental test of chloride ion permeability, scaling resistant and freeze-thaw resistance were carried out to improve the durability of the mechanical placing concrete of subsidiary structure. According to the results of this study, in observation of concrete surface condition, the concrete exposed by severe environmental condition showed broad ranges of damage with high chloride contents. Meanwhile, the water-binder(W/B) ratio and the less water content, and fly ash concrete than the specified existing mix proportion is significantly improved the durability. Also, the optimal mix proportion derived for test is satisfied the strength and air contents, water-binder ratio, and durability criteria of concrete specifications, as well as service life seems greatly improved.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2008

The purpose of this study was to evaluate the effect of additional etching procedure prior to Maxcem resin cement application in indirect restoration cementation using push-out bonding strength. One hundred and two extracted human molars were used to make indirect resin restorations of gold inlay and Synfony. These restorations were cemented using Maxcem and Variolink II. Additional etching procedures were done for one group with Maxcem. Three groups have 17 specimens in both restoration types. Push-out bond strength was measured using multi-purpose tester and calculated for bonding strength per sqaure-millimeter area. The mean bonding strength values were compared using SPSS 12.0K program for one-way ANOVA and Scheffe's Test with 95% significance. Under the condition of this study, the additional etching procedure prior to usage of Maxcem resulted in reduced bond strength for both of restoration types.