• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1359-1365
• /
• 2014

In this study, 1-way fluid structure interaction analysis(FSI) for the shutter, component of side jet thruster was performed to evaluate the safety. Driving torque to open nozzle, thermal and high pressure load of hot gas was applied to shutter. Thus, the shutter must be designed to endure this load during combustion. We carried out computational fluid dynamics analysis to obtain the pressure, temperature, and heat transfer coefficient of hot gas of side jet thruster. We then used the data as the load condition for a thermal structural analysis using a mapping method. The locations with the maximum stress and temperature distributions were found. We compared the maximum stress with the tensile stress of shutter material according to temperature to evaluate the safety. We also analyzed the radial deformation of the shutter to set the proper interface gap with the side jet thruster parts.

• Composites Research
• /
• v.13 no.1
• /
• pp.11-24
• /
• 2000

In this paper, finite thickness and tow phase effects on the mechanical behavior were studied numerically for plain weave textile composites. Unit cell analysis based on a superposition method was employed to simulate uniaxial tensile loading condition and macro-element post-processor was used to reduce computer resource requirement. The effective moduli and micro-stress distribution were calculated for finite thick plain weave composites with phase shifts. Single layer and infinitely thick configurations were also considered for comparison.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.41-52
• /
• 2003

In this paper, three-dimensional thermo-mechanical properties of carbon-phenolic 8-hamess satin weave composites were predicted considering geometric parameters of microstructures. The effective properties were calculated by a series of numerical experiments based on unit cell analysis. The microstructural details were modeled through macro-elements, and the periodic boundary conditions were derived for corresponding un it cell types. The Monte Carlo method was employed to consider the random phase shift between the layers, and the results were investigated on the effect of the geometric parameters of shift, number of layers and waviness ratios. Experimental tests were also performed and the results were compared.

• Composites Research
• /
• v.33 no.3
• /
• pp.169-175
• /
• 2020

The compression and tension test were performed to evaluate the stiffnesses of the conical composite lattice structures and results of test were compared with finite element analysis results. Because of difficulty to perform simple tension and compression test due to conical shape, suitable specimens and jig for test were made. Subelements extracted from the structure were prepared for compression test. Compression test of subelement was performed and compressive strains in fiber direction were measured. Compressive stiffness of the helical rib was verified by finite element analysis results. For stiffness of hoop rib, hoop ring specimens were extracted from the structure. Tension test of hoop ring specimen was performed to apply bending deformation to hoop rib. Stiffness of hoop rib was verified by finite element model considering various fiber volume fraction in thickness direction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.692-695
• /
• 2010

일반적으로 모델개선에서는 부재단위의 강성을 파악하기 때문에 구조물의 취약부인 부재단부의 손상이 집중될 경우 손상의 형태를 세밀히 파악하기 어려우며 손상된 구조물의 거동을 정확하게 모사하기 어려운 단점이 있었다. 이를 해결하기 위해서는 부재 단부에 발생한 손상을 고려할 수 있는 좀 더 정밀한 해석 모델을 통한 모델개선이 필요하다. 본 연구에서는 부재 단부에 반강접 접합을 가지는 해석모델을 사용해 모델 개선을 실시하고 이를 통해 접합부의 손상 평가와 손상 구조물의 거동을 파악하였다. 제안된 방법을 5층 1경간의 RC 벽식 실험체의 손상탐지에 적용하였으며 그 결과 부재단위 모델을 사용할 때보다 더욱 정확하게 구조물의 손상을 평가하고 거동을 모사할 수 있었다.

• 전기의세계
• /
• v.45 no.2
• /
• pp.32-38
• /
• 1996

본 논문에서는 2차측이 평판형 구조를 갖는 선형유도전동기를 대상으로 하여 유한요소법을 이용한 수치해석방법과 기자력발생의 개념적인 기본단위가 되는 하나의 전류도체를 등가표면전류밀도로 치환하여 해석하는 공간고조파해석 방법[10]과, 영구자석 계자형 선형동기전동기의 공간고조파 해석방법에 대하여 소개하겠다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.455-467
• /
• 2001

In this study, the stacking phase shift effect on the effective property and stress distribution was investigated for 8-harness satin weave textile composites under uni-axial tension. Textile configurations with varied phase shifts were modeled by unit cells and repeating boundary conditions were applied at the outer periodic surfaces. The effective property and stress were calculated by the unit cell analysis using macro-element to reduce the computational resource. It was found that stresses were dependent on the variation of tow arrangement of adjacent layers. The in-phase and the shifted configurations showed large differences in the stress distribution pattern. The stress level was very high in the resin region and the distribution of the maximum stresses was widely scattered.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.261-264
• /
• 2008

Recently, as necessity for urban recycling has increased, the research on integrated multi-purpose space has been required. Development of the system for integrated multi-purpose space is needed to form the efficient and higher value-added space. In this research, the notion of integrated multi-purpose space is defined and two proposed structural system, which are space truss and mega structure system, are compared. Mega structure system has been found as more proper system and proposed for analysis. As verified by the number of mega beam and shape of mega column, the analysis has been carried out. The results show that mega structure system offers proper performance for integrated multi-purpose space.

• Applied Chemistry for Engineering
• /
• v.2 no.3
• /
• pp.222-228
• /
• 1991

The cmc values of the arbitrary surfactants were estimated by the method of the multivarial explanation by the computer that put in the suitable score of the various kinds of the structural unit. The 1.00 in the total. We can obtain reasonably accurate cmc values for the surfactant with the simple molecular structure.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.139-145
• /
• 2019

This paper investigated the strength and stiffness of composite truss unit structures. The model used is a core-filled model combining the Kagome model and the cube truss model. The material properties used for the analysis are 304 stainless steel with elastic modulus of 193 GPa and yield stress of 215 MPa. The theoretical equation is derived from the relative elasticity relation of Gibson - Ashby ratio, the analysis was performed using Deform 3D, a commercial tool. In conclusion, the relative elasticity for this unit model correlates with 1.25 times the relative density and constant coefficient, elasticity is inversely proportional to pore size. The relative compressive strength has a correlation with relative density of 1.25 times. Proof of this is a real experiment, the derived theoretical relationship should further consider mechanical behavior such as bending and buckling. In the future, it is hoped that the research on the elasticity and the stress according to the structure of the three-dimensional space will be continued.