• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.19-24
• /
• 1998

vortex tube의 에너지 분리현상이 Ranque에 의해 처음으로 발견된 이래 vortex tube는 산업현장에서의 그 이용률이 점차 증대되고 있다. 특히, 최근에는 작업자의 쾌적한 작업환경을 조성하여 작업능률을 향상시킬 목적으로 제철소 등의 고온, 고습 작업장이나 분진, 석면, 유해먼지나 가스, 증기 등이 많이 발생하는 작업장에서 냉각복(air cool jacket) 또는 공기공급식 호흡보호구의 공기공급시스템에 많이 활용되고 있다. 이러한 vortex tube를 이용한 냉각복 및 호흡보호구는 작업자의 능률향상뿐만 아니라 직업병의 예방 및 안전측면에서 매우 효율성이 높아 그 적용범위가 점차 확대될 전망이다. (중략)

• The Journal of Engineering Geology
• /
• v.16 no.3 s.49
• /
• pp.245-254
• /
• 2006

Using a natural gradient tracer test, the characteristics of hydrodynamic dispersion according to each depth of a fractured rock were studied, and the effective porosity and longitudinal dispersivity of the fractured rock were estimated. The difference of vertical hydrodynamic dispersion was identified by concentration breakthrough curves linear regression analyses of bromide concentrations according to depths versus time, and hydraulic fracture characteristics at two intervals of the monitoring well. Higher concentration and faster arrival time at GL- 18 m depth (RQD 13%, average joint spacing 2 cm, TCR 100%) than at GL- 25 m depth (RQD 41%, average joint spacing 7 cm, TCR 100%) resulted from shorter distance and more fractures. Tracer was transported through the 1 st fractures until the arrival of its peak concentration and through the 2nd fractures or matrix diffusion after the arrival of its peak concentration. The increase/decrease slopes of bromide concentration versus time were 3.46/-1.57 at GL-18 m depth and 3.l9/-0.47 at GL- 25 m depth of the monitoring well. So the faster bromide transport was confirmed at GL- 18 m depth with more fractures. The concentration increment of bromide was fitted by a Gaussian function and the concentration decrement of bromide was fitted by an exponential function. Effective porosity and longitudinal dispersivity estimated by CATTI code were 10.50% and 0.85 m, respectively.

• KOREAN POULTRY JOURNAL
• /
• v.36 no.7 s.417
• /
• pp.75-78
• /
• 2004

금년 여름은 어느해 보다 더울 거라는 기상청 발표가 있듯이 농가에서는 여름철 준비에 한창이다. 지난해의 경우 6월 1달동안 $30^{\circ}C$를 넘는 기온이 3차례에 그쳤지만, 금년은 16일 현재 9차례나 $30^{\circ}C$를 웃돌면서 올여름 더위를 예고하고 있다. 최근 사료가격이 고가행진을 보이는 가운데 사료빈의 단열로 생산성 향상 효과를 기하는데 관심이 집중되고 있다. 그동안 각 농가에 설치된 사료탱크(빈)가 한 낮의 태양에 노출되어 빈 내부가 더워질 경우 사료의 영양소가 파괴되고 기호성이 낮아지면서 닭의 생산성에 악영향을 가져온다는 문제가 제기되어왔다. 즉, 사료의 온도가 $60^{\circ}C$가 넘을 경우 단백질의 변성이 나타나는 것으로 알려지고 있으며, 직사광선이 내리쬘 때 사료빈내 온도는 $70^{\circ}C$까지도 높아지는 것으로 알려지고 있다. 그러나 농가에서는 한 여름 사료탱크내 온도상승에 대해서는 관심이 부족했던 것이 사실이다. 중동이나 더운 지역에서는 알루미늄 커버를 사료빈에 덮어 완벽하게 단열을 하고 있는 것을 쉽게 발견할 수 있다. 최근 몇 년동안 사료회사와 일부 양계인들은 이런 문제점을 보완하기 위해 사료빈에 흰 페인트를 칠하는 농가도 있었고, 사료빈을 중심으로 차광망을 설치하는 곳도 있었으나 한여름 뜨거운 태양광선에서는 큰 효과를 기대하기 어려운 문제에 부닥쳐 왔다. 그러나 최근 이천과학축산기구(대표 한상우, 49)에서 새로운 재질을 이용한 단열방법이 개발되면서 농가들로부터 선풍적인 인기를 얻고 있어 고온기 생산성향상 방안의 일환으로 이를 소개할까 한다.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.15-15
• /
• 2011

본 연구는 기존의 하우스 랩이 가지는 방풍, 방수 기능 외에 복사열 차단성, 열반사성, 통기성, 투습성, 난연성, 방수성 및 단열성 등의 다기능성이 발현되는 우수한 건축용 하우스 랩을 제조하는 목적으로 시스-코어 섬유로 이루어진 부직포층, 통기성 합성수지 필름층, 니들펀칭 복합 부직포층 및 고분자 필름이 일면 또는 양면에 코팅된 내식성 알루미늄 필름층이 순차적으로 적층되고 핫-멜트 라미네이팅에 의하여 합지 된 다기능성 하우스 랩 및 그의 따른 제조방법에 관한 것이다. 상기 니들펀칭 부직포 내부에 포함 된 아라미드 섬유에 의해 우수한 난연효과를 가지며, 통기성 필름에 의하여 투습방수 기능을 가질 수 있으며, 니들펀칭 부직포층에 다량의 공기가 함유되어 보온성이 우수하고, 내식성 알루미늄 필름층이 가진 빛에 대해 우수한 방사성으로 복사열을 차단하여 단열효과를 나타내는 하우스 랩을 제조하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.291-296
• /
• 2014

For the purpose of energy consumption and green-house gas reduction from building, new insulation materials with improved thermal property have been developed and used. Among new insulation materials, mineral hydrate which compensates for the defects of existing materials is using as a prominent insulation material. The fabrication method of mineral hydrate is similar to that of ALC for building structure but mineral hydrate is only used for insulation. The raw materials that make up of mineral hydrate are cement, lime and anhydrite. Especially anhydrite is all dependant on imports. In this study, Desulfurization Gypsum(DG), by-product of oil plant, was used for replacing for imported anhydrite and waste recycling. DG substituted all of anhydrite and a part of lime. Mineral hydrate used DG had analogous thermal and physical properties, compared to existing mineral hydrate.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.4
• /
• pp.347-354
• /
• 2018

This paper verifies the superiority of warming work in winter by applying the insulation gang-form to the apartment housing site and analyzes the economic feasibility of the application. According to the experimental results, the actual cost of warming work was about 52 million won less than planned, and 160 million won less than the existing average.(Note - The cost of gang form material increased from 260 million won to 310 million won after the change) As a result, the construction cost could be reduced by about 110 million won. As the costs of warming work can change depending on the number of floors, the building number, and the area of each site, it is deemed necessary to conduct a thorough review in advance at the site where the cost of warming work is to be applied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.781-784
• /
• 2008

In this paper, insulating effect and strength development of concrete under low temperature are reported varying curing sheets. According to test results, in temperature -5$^{\circ}$C concrete subject to exposure and air cap condition, result in a frost damage at early age by a fall of below zero temperature. Mean while, the combination of PE film and non-woven fabric maintained around 3 $^{\circ}$C within first 24 hours since placement. For double bubble sheets, concrete temperature maintained above 7$^{\circ}$C due to its excellent heat insulating capability. As a result of core strength test, strength of specimens cured with viny + non-woven fabric and double bubble sheets had higher strength than strength of other specimens due to good heat insulation effect at early age.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1001-1004
• /
• 2008

This study reviewed the results of utilization of insulation heat curing method using double layer bubble sheet in slab concrete and mass concrete in cold weather environment. First of all, when double layer bubble sheets are applied, it was shown that slab concrete was protected from early freezing by remaining between 6 and $10^{\circ}C$ even in case outside temperature drops $10^{\circ}C$ below zero until the 2nd day from piling, and in the case of mass concrete, with the maximum temperature difference between the center and surface less than $6^{\circ}C$, crack occurrence index was close to 2 and no hydration heat crack occurred by internal constraint. The insulation heat preservation curing method using the double bubble sheet applied in this field prevented early freezing owing to stable curing temperature management, deterring concrete strength development delay at low temperature, and obtained the needed strength. Also, it was proven that the method is highly effective and economic for cold weather concrete quality maintenance through curing cost reduction like construction period shortening and labor cost reduction, etc by reducing the process of temporary equipment installation and disassembling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.625-632
• /
• 2018

This study was done to reduce total energy demand based on resource shortage problems and to provide improvement points for more efficient adjustment of the high insulation standards for saving energy in Korea. The demand sensitivity was fully considered by varying the slope of each building. The energy performance of the building was maximized by the introduction of outdoor air at night. A final low-energy building model was developed with the two measures combined, and the short-term operation of the night-fuzzy ventilation system was simulated. The result showed a reduction of about 6 to 7 percent compared to the base model. The results could have many implications in terms of the need to conduct demand sensitivity analyses in architectural design.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.106-111
• /
• 2012

In this study, EIFS (Exterior insulation finish system) of exterior cladding was applied Cone calorimeter test to confirm the effect of flame retardant. As a results, the initial ignition points in accordance with the coated form and concentration of the flame retardant was delayed. But flame resistant treatment of EIFS cladding to control the fire will not affect confirmed that. In addition, EIFS that uses high-density and low-density due to difference in the density of the impact of the fire was no difference. The exterior of the ignition experiment occurred before and after 40 seconds, heat release rate to 100 seconds appears to occur about 90 % compared with the other exterior wall materials, the initial fire spread very fast was confirmed. EIFS cladding in order to prevent the spread of fire in the application of EIFS legally use is limited by the use of the building. And flame spread can be prevented, such as a vertical outer wall compartment measures are urgently needed.