• Korean Journal of Plant Taxonomy
• /
• v.37 no.4
• /
• pp.419-430
• /
• 2007

This study was conducted to know the taxonomic features of nuclear ribosomal ITS DNA sequences, ITS1, ITS3 and 5.8S regions, as to nine individuals belonging to four Oxalis species in Korea and an induced species. Sequences of the same regions of sixteen taxa deposited in GenBank were also aligned with those of Korean species as outgroups. The length of ITS sequences aligned in this study is 679 by in total. Evidences, from not only the sequence similarities and divergences but also the phylogenetic and statistical treatments with ITS sequences aligned, were useful for the taxonomy of the genus. The similarity of sequences, among both cauline and acauline taxa, is high as 89% and 95% respectively, but between cauline and acauline taxa, relatively low in the range of 64~69%. The sequence divergences, among both cauline and acauline taxa, is also high as much as 0.36~0.42, but between both cauline and both acauline taxa, low as 0.04~0.06. Two groups between cauline and acauline taxa are paraphyletic, and each group makes a single Glade with a high bootstrap value. The analysis of variance, using ITS sequence aligned, revealed that taxa are significantly different in the level of 0.5%, and O. corymbosa, an induced speices, is also separated from the Korean taxa in the Duncan analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.181-191
• /
• 2007

The gemological charateristics of Gwangdong tektites and Baikdusan obsidians were investigated, using microscopy, density and refractive index measurements, X-ray fluorescence spectrometry, Inductively Coupled Plasma Mass spectrometry, X-ray powder diffraction, and electron microprobe analysis. The Gwangdong tektites and Baikdusan obsidians are both black in colour and slightly trans-lucent with various shades of brown when cut into a few mm thick. Both the materials yield conchoidal fracture on broken surface. The tektites occur as tear-drop shapes, ranging from 4 to 10 cm long, and in spheres, from 3 to 5 cm in diameter. On the surface numerous shallow pits up to 3 mm in diameter are present. Mohs' hardness and specific gravity are 5 to 5.5 and 2.66, respectively. The tektites are singly refractive, with an refractive index of 1.51. Numerous spherical air bubbles are randomly scattered throughout the tektites, and silica-rich glass inclusions are occasionally seen. X-ray powder diffraction analysis verifies that they are non-crystalline. The Baikdusan obsidians show very similar properties to those of the Gwangdong tektites, especially in hardness, amorphous nature and fracture. Nevertheless, the Baikdusan obsidian can readily be distinguished from the Gwangdong tektites by refractive index ($1.49{\sim}1.50$), specific gravity (2.67 to 2.68), and inclusions (absence of bubbles and presence of sanidine and magnetite crystals).

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.2
• /
• pp.120-130
• /
• 2020

This paper solves the problem in underdetermined convolutive mixture by improving the disadvantages of the multichannel nonnegative matrix factorization technique widely used in blind source separation. In conventional researches based on Spatial Covariance Matrix (SCM), each element composed of values such as power gain of single channel and correlation tends to degrade the quality of the separated sources due to high variance. In this paper, level and frequency normalization is performed to effectively cluster the estimated sources. Therefore, we propose a novel SCM and an effective distance function for cluster pairs. In this paper, the proposed SCM is used for the initialization of the spatial model and used for hierarchical agglomerative clustering in the bottom-up approach. The proposed algorithm was experimented using the 'Signal Separation Evaluation Campaign 2008 development dataset'. As a result, the improvement in most of the performance indicators was confirmed by utilizing the 'Blind Source Separation Eval toolbox', an objective source separation quality verification tool, and especially the performance superiority of the typical SDR of 1 dB to 3.5 dB was verified.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.53-59
• /
• 2014

It has been generally recognized that the conventional rockfall protection nets have several problems to actual field application in the aspect of shock absorption, lack of pullout bearing capacities, and net damages. Because of the recognition, authors have tried to develop a new rockfall protection system consisted of shock absorption parts and hexagonal net configuration. In the previous research by the authors, the performance of the newly developed rockfall protection system has been investigated through the laboratory tests and the full-scale testing. In this study, subsequently, numerical analysis program is organized to make a confirmation of the structural stability and performance. For the correct design procedure of the hexagonal net system, it is essential to understand the various mechanical behavior of the entire system. It is also important to be reproduced the systematic characteristics of the system acquired by laboratory and full-scale testing by numerical analysis in order to carry out the numerical experiment to understand various mechanical behavior of the system. As a conclusion, the hexagonal net has better performance in mechanical and physical behavior compared with that of the rectangular net. Furthermore, due to the hexagonal net shows a good performance in aspect of the load distribution, it gives a good alternative in long-term management of the rockfall protection net.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.69-78
• /
• 2017

Shannon of the 5G smartphone and Fourier of the signal processing meet in the sampling theorem (2 times the highest frequency 1). In this paper, the initial Shannon Theorem finds the Shannon capacity at the point-to-point, but the 5G shows on the Relay channel that the technology has evolved into Multi Point MIMO. Fourier transforms are signal processing with fixed parameters. We analyzed the performance by proposing a 2N-1 multivariate Fourier-Jacket transform in the multimedia age. In this study, the authors tackle this signal processing complexity issue by proposing a Jacket-based fast method for reducing the precoding/decoding complexity in terms of time computation. Jacket transforms have shown to find applications in signal processing and coding theory. Jacket transforms are defined to be $n{\times}n$ matrices $A=(a_{jk})$ over a field F with the property $AA^{\dot{+}}=nl_n$, where $A^{\dot{+}}$ is the transpose matrix of the element-wise inverse of A, that is, $A^{\dot{+}}=(a^{-1}_{kj})$, which generalise Hadamard transforms and centre weighted Hadamard transforms. In particular, exploiting the Jacket transform properties, the authors propose a new eigenvalue decomposition (EVD) method with application in precoding and decoding of distributive multi-input multi-output channels in relay-based DF cooperative wireless networks in which the transmission is based on using single-symbol decodable space-time block codes. The authors show that the proposed Jacket-based method of EVD has significant reduction in its computational time as compared to the conventional-based EVD method. Performance in terms of computational time reduction is evaluated quantitatively through mathematical analysis and numerical results.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2010

To assess the stress distribution of implant prosthesis induced by intentional misfit using photoelastic model. Stress was measured at the surrounding bone after applying vertical load to the implant. Three implants were placed in each of three photoelastic resin blocks. No misfits were used for the control group, while for the experimental group $100{\mu}m$ misfit after cutting the crown was used. The photoelastic stress analysis was performed. In control group, stress concentration was not shown when the load was not applied, whereas stress concentration was shown only in the loaded part even when load was applied and the stress was distributed in anterior-posterior direction when applying a load in the middle. When intentional misfits were given, stress around the fixture was incurred when tightening the screw even if load was not applied. If the load was applied, stress was concentrated around the implants including areas where the load was applied. In particular, the prosthesis made of UCLA showed more stress concentration as compared with a conical abutment. In the UCLA case, concentration was shown from the apex following through the axis to the cervical area. Prosthesis with misfit makes the stress concentrated though the load was not applied and it induces even more severe stress concentration when the load was applied. This founding demonstrates the importance of the correct prosthesis production.

• The Korean Journal of Malacology
• /
• v.28 no.4
• /
• pp.335-342
• /
• 2012

This study was conducted to estimation the selection response for growth-related traits in 31-month old of Pacific abalone, Haliotis discus hannai were born in 2008. In overall mean of surveyed traits and standard deviation showed $76.31{\pm}7.247$ mm of shell length, $49.48{\pm}5.307$ mm of shell width and $40.96{\pm}6.80$ g of total weight. The effect of sex and maturity were statistically significant in all traits include out a condition factor (p < 0.01). And In effect of sex, female were higher than male in all traits excepting condition factor, significantly. In correlation between breeding value and phenotypic value by each traits, showed rank correlation coefficient and simple correlation coefficient, which represented low positive correlation. A hopeful genetic improvement to the next generation showed 6.96 mm of shell length, 4.47 mm of shel width and 12.93 g of total weight. Therefor, It is considered that if considering properly selection intensity and selection ratio, efficient improvement could be made.

• Clean Technology
• /
• v.11 no.1
• /
• pp.41-50
• /
• 2005

In this study, semibatch emulsion copolymerization of n-BA as adhesive component and MMA as coagulant component were carried out for the stable acrylic polymer latex in aqueous phase for polymer cement using LE-type nonionic surfactant as environmental friendly surfactant. The stable polymer emulsion was obtained with the increases of chain length(n) of this surfactant. The effect on the amount of LE-50 as nonionic surfactant were showed that the concentration of polymer latex were increased by increasing the amount of LE-50, whereas the average particle size were decreased by increasing the amount. The addition of functional monomer in initial reactor charge showed a significant effect on the final polymer concentration and the latex particle size. The single polymerization of each n-BA or MMA showed a very low concentration of polymer latex and very big particle size due to coagulation. In the polymerization composed of mixed monomer with MMA and n-BA, the larger the ratio of MMA to n-BA in the copolymers, the greater the amount of coagulum produced. It was found that a stable copolymers were obtained in the range of 15-35 % of n-BA. Moreover, incorporation of some functional monomers in addition to of main monomers became more stable polymer latex. Through DSC and IR analysis, the final polymer latex was composed by MMA/n-BA/AA/AM with a single Tg depending on the reaction conditions. As a result, the conditions of this acrylic polymerization could also be effectively controlled to get the desired final products.

• Journal of Korea Port Economic Association
• /
• v.28 no.2
• /
• pp.1-27
• /
• 2012

As more manufacturing and global businesses are being pulled into the port area, the idea of a Port Business Valley (PBV) is being pondered as it would create jobs and added value. The PBV would be centered around the harbor and be connected to the port, a logistics district, an industrial district, and the city. The resulting domestic and foreign investment in logistics, industry, business, tourism, living, etc. would vitalize the geographical characteristics of Incheon Port. It would also generate the largest amount of ripple effects between industries in the PBV. However, up until recently, the most frequently offered examples of planning that have helped logistics of a port to grow that have used a PBV have been those of Busan New Port and Gwangyang Port. However, this study is the result of the recent inception of the idea of creating a PBV centered around Incheon Port and the need for experts to develop a plan for such a PBV in Incheon by conducting a site specific study. The aim of this study is to set up the concept of PBV and establish PBV model of Incheon Port. In addition, this study identifies construct factors and their strategies for establish PBV of Incheon Port and then, shows the key factors and related-strategies on Fuzzy-AHP analysis from a survey of logistics experts with Incheon Port.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.979-986
• /
• 2010

This paper presents an algorithm for retrieving precise radar cross sections(RCS) of various trihedral corner reflectors (TCR) which are external calibrators of synthetic aperture radar(SAR) systems. The theoretical RCSs of the TCRs are computed based on the physical optics(PO), geometrical optics(GO), and physical theory of diffraction(PTD) techniques; that is, the RCS computation includes the single reflections(PO), double reflections(GO-PO), triple reflections(GO-GO-PO), and edge diffractions(PTD) from the TCR. At first, we acquire an SAR image of the area that five TCRs installed in, and then extract the RCS of the TCRs. The RCSs of the TCRs are extracted accurately from the SAR image by adding up the power spill, which is generated due to the radar IRF(Impulse Response Function), using a square window. We compare the extracted RCSs with the theoretical RCSs and analyze the difference between the theoretical and experimental RCSs of the TCR for various window sizes and various backscattering coefficient levels of the adjacent area. Finally, we propose the minimum size of the integration area and the maximum level of the backscattering coefficients for the adjacent area.