• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.309-321
• /
• 1988

This paper proposes on the algorithm of axis equation & radius function for the G.C representation which describes the curved objects with circular cross section. Object combined with linear and nonlinear parts is detached by clustering from depth data & axis points is extracted by normal vecter of the surface mask patches. In ths case of nonlinear axis point, axis equation is described by Hermite curve & the effectiveness of this paper is demonstrated by serveral experiments.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.97-100
• /
• 2010

3차원 정보모델에 기반한 설계 자동화 프로그램의 개발은 좀 더 완성도가 높은 설계안을 도출할 수 있는 방안을 제시할 수 있다. 콘크리트 교량의 설계 과정에서 정형화된 구조 검토 단계 부분을 자동화하고 설계자로 하여금 좀 더 창의적인 설계가 가능하도록 지원하는 시스템을 개발하였다. 특히, 3차원 Building Information Modeling 기반의 프리스트레스트 콘크리트 박스 거더교에 대한 설계 자동화 시스템을 개발하였다. 이를 위하여 3차원 렌더링 알고리즘을 사용하여, 사용자가 원하는 단면 위치 및 분류 체계에 따라 설계를 자동으로 수행할 수 있도록 적용하였다. 또한 생성된 도면은 데이터 호환이 가능함으로써, 사용자의 편의성이 향상될 것으로 판단된다. 이는 설계자동화 분야에서 강교에 국한되었던 점을 콘크리트교를 포함한 주요 교량으로 확대하고 설계 성과품으로 3차원 모델을 도출할 뿐 아니라 2차원 도면을 연계하도록 구성하여 토목 엔지니어의 기술력을 향상시킬 것으로 기대된다.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.11-19
• /
• 2011

A localization development of Composite rotor blade for Smart Unmanned Aerial Vehicle(SUAV) has been conducted. Overall localization development encompassed selection of domestic composite material having similar properties to that of original one at its best, coupon tests for data base of new material properties, re-calculation of blade sectional properties, and validation of structural/dynamic design requirements such as isolation of rotor natural frequency from excitation, static and fatigue strength, aeroelastic stability. The results of all these activities are described. This paper briefly discusses the improved manufacturing process for the localization of SUAV blade.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.139-147
• /
• 1999

Rapid Prototyping has made a drastic change in all industries which needs to reduce the time for the development of new products. Orientation and packing in rapid prototyping is considered as the most important factors to maximize the utilization of space in the build chamber and reduce build time. However, the decision of these parameter is mainly dependant on the operators's experience. This paper presents the methodology to find the optimal build layout considering an orientation and packing of multiple parts in SLS processing. Each part is represented as a voxel structure to deal with the inefficiency in a bounding box approach. Test results show that the adapted BL algorithm with a genetic algorithm(GA) can be applicable to a real industry.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.183-186
• /
• 2004

2차원 영상 기반의 세포 분석은 2차원 평면 상에서의 관찰만 가능하므로 정확하고 객관적인 분석에 한계가 있다. 따라서 이러한 한계를 극복하고자 컨포컬 현미경을 통해 획득한 연속적인 2차원 단면 영상들로 구성된 볼륨 데이터를 볼륨 및 표면 렌더링을 통해 가시화 하여, 세포핵에 대한 다양한 각도에서의 형태 관찰이 가능하도록 하였다. 또한 세포핵 볼륨에서 ROI 추출을 통해 국부 영역 분석의 효율성을 높였다. 그리고 이 결과를 바탕으로 정확한 암 세포의 계측 및 정량적 분석을 통해 이후 자궁암 환자에게 최적의 진단 및 지료를 제공할 수 있는 연구 기반을 마련하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.690-692
• /
• 2007

기존의 2 차원 이미지를 통한 세포 분석은 단지 세포의 단면만을 볼 수 있기 때문에 정확한 구조를 파악하기 힘들다. 본 논문에서는 그리드 기술을 이용하여 2 차원 이미지들을 세포 구조에 대한 더욱 정확한 이해 및 연구 능률의 향상을 도모할 수 있는 3 차원 이미지로 재구성하는 시스템을 개발하였다. 이 시스템은 고성능 이미지 처리를 위해서 계산 그리드를 이용하며, 화질 개선을 위한 전처리 기술, 자동 영상 정렬 기술, 효과적인 삼차원 재구성 기술과 같은 다양한 이미지 처리 알고리즘 및 preStageIn, BgUpload, delegated preprocessing 등과 같은 데이터 전송 최적화 기술 등을 제공한다. 또한, 다양한 이미지 뷰어 기능 및 DirectX 를 이용한 3 차원 렌더링 기능을 제공한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.5 s.305
• /
• pp.51-58
• /
• 2005

This paper proposes an efficient algorithm for extracting a tumor region from an breast ultrasound volume image by using rate-distortion (R-D) based seeded region growing. In the proposed algorithm the rate and the distortion represent the roughness of the contour and the dissimilarity of pixels in a region, respectively. Staring from an initial seed region set in each cutting plane of a volume, a pair of the seed region and one of adjacent regions whose R-D cost is minimal is searched and then they are merged into a new updated seed region. This procedure is recursively performed until the averaged R-D cost values per the number of contour pixels in the seed region becomes maxim. As a result, the final seed region has good pixel homogeneity and a much smooth contour. Finally, the tumor volume is extracted using the contours of the final seed regions in all the cutting planes. Experimental results show that the averaged error rate of the proposed method is shown to be below 4%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.846-852
• /
• 2012

The present paper is the preliminary study of the development of a morphing aircraft wing and investigates experimently the aerodynamic characteristics of a base airfoil and a morphing airfoil. The wind tunnel tests are conducted for a base Clark-Y airfoil, an airfoil with a mechanical flap, and a morphing airfoil. Lifts, drags, and pitching moments are measured by using a three-axis load cell and they are calibrated by considering solid blockage and wake blockage. The wind tunnel tests are conducted for various air speeds, Reynolds' numbers, and angles of attack. The experimental results show that the aerodynamic characteristics of the morphing airfoil in lift-drag and lift-pitching moment are better than those of the airfoil with a mechanical flap.

• Economic and Environmental Geology
• /
• v.17 no.1
• /
• pp.49-55
• /
• 1984

This paper describes three-dimensional (3-D) standard curves for conductive dipping buried bodies in induced polarization (IP) method. Dipole-dipole IP responses for the dipping bodies are calculated by the numerical modeling technique using an integral equation solution. Dip angles of the bodies are 0, 20, 45, 70 and 90 degrees, respectively. The horizontal (0-degree dip) and vertical (90-degree dip) bodies produce symmetrical patterns of IP responses. The dipping bodies of 20, 45 and 70 degrees, however, produce asymmertical patterns, with the highest IP contours dipping in the direction opposite to the bodies in pseudo-sections. The most remarkable asymmetrical pattern appears in the model of 20-degree dip. It is difficult to distinguish the body of 70-degree dip from that of 90-degree dip on the basis of dipole-dipole IP data. The IP pattern in pseudo-sections varies when the line moves away from the center of the body along strike, with the anomaly deeper and smaller in amplitude. IP maps seem to be more useful than IP pseudo-sections in predicting the location of target.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.107-122
• /
• 2006

The main objective of this study is to develop a web-based Geographic Information System (GIS) application, IGIS(Integrated Groundwater Information Service System), for efficient management of groundwater data. This integrated system includes various groundwater measurements, monitoring data, well data, hydrogeochemical data, hydrogeological maps and diversely analyzed results including time series analysis data for water levels and quality. It will be used efficiently for local government officers to manage groundwater within their districts and also for drillers and investigators to develop wells and assess groundwater conditions. This web-based GIS system was implemented firstly for Cheonan and Daegu city. As a result, the system makes the efficient management, distribution and utilization of groundwater data possible by web-based GIS technology.