• Journal of Family Resource Management and Policy Review
• /
• v.27 no.4
• /
• pp.63-74
• /
• 2023

This study considered allocating and balancing time use as an important factor that determines the quality of life, and attempted to analyze the happiness of married women through the perspective of satisfaction with time use. We investigated the structure of time use, and analyzed the factors that affect happiness in the perspective of time use through the Time Use Survey data. Analyzing the happiness of married women, we found out that the level of happiness and the factors affecting happiness varied by generation. In the case of economically active women, the happiness of baby boomers and Generation X was mostly impacted by mandatory work hours, while the happiness of Generation Y was mostly impacted by the presence of care-dependent people. However, in the case of economically unactive women, the happiness of baby boomers and Generation X was mostly impacted by leisure and volunteering time that could be used freely, while the happiness of Generation Y was mostly impacted by the attitude toward gender roles. Therefore, through the perspective of time use, the happiness and the factors determining the happiness of married women differs by generation and economic activeness. This study has significant implications for the establishment of family policies for married women.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.36-44
• /
• 2024

Copper electrodeposition technology is essential for producing copper films and interconnects in the microelectronics industries including semiconductor packaging, semiconductors and secondary battery, and there are extensive efforts to control the microstructure of these films and interconnects. In this study, we investigated the influence of crystallographic orientation on the local plastic deformation of copper films for secondary batteries deformed by uniaxial tensile load. Crystallographic orientation maps of two electrodeposited copper films with different textures were measured using an electron backscatter diffraction (EBSD) system and then used as initial conditions for crystal plasticity finite element analysis to predict the local plastic deformation behavior within the films during uniaxial tension deformation. Through these processes, the changes of the local plastic deformation behavior and texture of the films were traced according to the tensile strain, and the crystal orientations leading to the inhomogeneous plastic deformation were identified.

• Korean journal of health promotion
• /
• v.18 no.4
• /
• pp.177-183
• /
• 2018

Background: Many studies have reported that adolescents living with single parent have a high risk of obesity. However, those studies did not explore the implication of the gender of single parent living with adolescents. This study investigated the differences in obesity rates according to status of co-residence with their parents in Korean adolescents. The family living with single parent was classified into the family living with single father and the family living with single mother. Methods: This cross-sectional study involved 59,602 adolescents who participated in the 2017 Korea Youth Risk Behavior Web-based Survey. The data on height, weight, status of co-residence with parents, and the other variables were obtained through online questionnaires. Results: In male adolescents, the family living with single mother was related to a high proportion of obesity (odds ratio [OR] 1.24, 95% confidence interval [CI] 1.09-1.40) and overweight (OR 1.17, 95% CI 1.03-1.34). However, in female adolescents, the family living with single father was related to a high proportion of obesity (OR 1.49, 95% CI 1.23-1.82). In addition, female adolescents living with neither parent were more likely to be obese (OR 1.47, 95% CI 1.13-1.91) and overweight (OR 1.31, 95% CI 1.00-1.70). Conclusions: This study showed a risk of obesity in adolescents living with single parent differs according to the gender of single parent living with adolescents. Not adolescents living with a same-gender parent, but those living with an opposite-gender parent have a high risk of obesity.

• Journal of Bio-Environment Control
• /
• v.22 no.1
• /
• pp.27-33
• /
• 2013

In order to provide basic data for the development of a controlled environment cultivation system and standardization of the structures, structural status and improvement methods were investigated for the fruit tree greenhouses of grape, pear, and peach. The greenhouses for citrus and grape cultivation are increasing while pear and persimmon greenhouses are gradually decreasing due to the advance of storage facilities. In the future, greenhouse cultivation will expand for the fruit trees which are more effective in cultivation under rain shelter and are low in storage capability. Fruit tree greenhouses were mostly complying with standards of farm supply type models except for a pear greenhouse and a large single-span peach greenhouse. It showed that there was no greenhouse specialized in each species of fruit tree. Frame members of the fruit tree greenhouses were mostly complying with standards of the farm supply type model or the disaster tolerance type model published by MIFAFF and RDA. In most cases, the concrete foundations were used. The pear greenhouse built with the column of larger cross section than the disaster tolerance type. The pear greenhouse had also a special type of foundation with the steel plate welded at the bottom of columns and buried in the ground. As the results of the structural safety analysis of the fruit tree greenhouses, the grape greenhouses in Gimcheon and Cheonan and the peach greenhouses in Namwon and Cheonan appeared to be vulnerable for snow load whereas the peach greenhouse in Namwon was not safe enough to withstand wind load. The peach greenhouse converted from a vegetable growing facility turned out to be unsafe for both snow and wind loads. Considering the shape, height and planting space of fruit tree, the appropriate size of greenhouses was suggested that the grape greenhouse be 7.0~8.0 m wide and 2.5~2.8 m high for eaves, while 6.0~7.0 m wide and 3.0~3.3 m of eaves height for the pear and peach greenhouses.

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.231-238
• /
• 2006

The physical properties of seven perlites different in particle size distribution were investigated to develop perlite bag culture in Korea. Particle sizes of 1.0-2.8mm and larger than 2.8 mm were rather evenly distributed in S-1 (1.2-5 mm), S-2 (0.15-5 mm) and S-5 (parat No.1). Larger particles were less in S-3 (1-3 mm), S-4 (Parat No.2), S-6 (OTAVI) and S-7 (Agroperl B-3). S-4, S-6 and S-7 contained lots of particles less than 1 mm in size. Total porosity was similar among substrates with the value of $59{\sim}62%$. Container capacity was between 35-40% regardless of substrates except in S-2 with 27.7%. Water content, which was about 60% at 0 kPa, was decreased sharply at 4.90 kPa regardless of substrates, which meant the easily available water was plenty in any kind of perlite tested. Substrates, S-1, S-2 and S-3 with different particle size distribution, were investigated to evaluate for perlite bag culture. Six tomatoes (Licopersicon esculentum Mill. cv. Rokkusanmaru) were planted in a perlite bag of 40 liters with the dimension of 120cm in length and 34cm in width. The amount of nutrient solution supplied and its drainage dependent on daily integrated radiation didn't show any regular trend during the growth. Roots in the bag were distributed evenly in S-1 and S-2 than in S-3. Plant grown in S-1 showed the highest total and marketable yield of 8,628 and 7,759 kg/10a, respectively. The number of small size fruits and malformed fruits were more in S-3. Consequently, S-1 with the particle size distribution of 1.2-5 mm is suggested as desirable substrate for perlite bag culture.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.343-354
• /
• 2003

Simulation studies were carried out to investigate the responses of selection for three carcass traits (longissimus muscle area: EMA, fat thickness: BF, and marbling score: MS) based on either adjusted phenotypes (APH) or estimated breeding values (EBV) in multivariate animal model with different breeding schemes. Selection responses were estimated and compared on six different models with respect to breeding schemes using either carcass measurements or real time ultrasonic (RTU) scans generated by Monte Carlo computer simulation supporting closed breeding population. From the base population with 100 sires and 2000 dams, 20 sires and 1000 dams by each generation were selected by either APH or EBV for 10 generations. Relative economic weights were equal of three traits as EMA(1): BF(－1) : MS(1) for standardized either APH or EBV. For first two models which were similarly designed with current progeny-test program in Korean cattle, three carcass traits with records either only on male progenies (Model 1) or on male and female progenies (Model 2) were used for selecting breeding stocks. Subsequently, generation intervals on males were assumed as 6${\sim}$10 years in these two models. The other two models were designed with tools of selection by RTU rather than carcass measurements with genetic correlations of 0.81${\sim}$0.97 between RTU and corresponding carcass traits in addition to whether with records (Model 4) or without records (Model 3) on female. In these cases, generation intervals on males were assumed as 2${\sim}$4 years. The remaining last two models were designed as similar with Models 3 and 4 except genetic correlations of 0.63${\sim}$0.68 between RTU and corresponding carcass traits with records (Model 6) and without records (Model 5) on females. The results from 10 replicates on each model and selecting methods suggested that responses indirect selection for carcass traits in Model 4 were 1.66${\sim}$2.44 times efficient rather than those in Model 1. Otherwise, in Model 6 with assuming moderate genetic correlations, those efficiencies were 1.18${\sim}$2.08 times with comparing to responses in Model 1. However, selection response for marbling score was the smallest among three carcass traits because of small variation of measurements. From these results, this study suggested that indirect selection using RTU technology for improving high meat qualities in Korean cattle would be valuable with modifying measuring rules of marbling score forward to large variation or modifying relative economic weight for selection.

• Korean Journal of Environment and Ecology
• /
• v.29 no.3
• /
• pp.431-440
• /
• 2015

This study investigated the correlation between the trees planted on the slope of the first landfill where the landfill was completed and the soil environment. 69 plots (($7{\sim}20m{\times}5{\sim}20m$) were planted with 26 kinds of major trees in the first landfill slopes for vegetation survey. The survey was conducted from 2007 to 2009. Soil analysis from 2007 to 2008 was made on the basis of the injured index and the indicator species were selected. Depending on the rate of growth of the indicator species, seven survey locations were selected for soil sample analysis. 10 tree species appeared to adapt to the landfill environment. Among them, the coniferous trees were Pinus thunbergii (Seedling) and Juniperus chinensis and the deciduous trees were Quercus aliena, Salix preudo-lasiogyne, Castanea crenata (Seedling), Prunus armeniaca var. ansu, Quercus acutissima, Chionanthus retusus, Liriodendron tulipifera (Seedling) and Celtis sinensis. 8 species of trees did not adapt well to the landfill environment. Among them, two kinds were coniferous, the other six kinds were deciduous. In addition, judgment on the other 8 species of trees as to whether they adapted well or not was postponed. The species for which judgment was postponed included one coniferous tree and seven deciduous trees. Indicator species of injured index was the species that have more than 25 % of the defect. The soil was collected from where Catalpa ovata, Sophora japonica, Albizzia julibrissin and Acer palmatum were planted for analysis. According to the soil analysis, the soil pH showed that the soil was alkaline. Regarding the three phases of the soil, most sample soil showed 60 % for the solid phase or 55 % for the solid phase but with less than 10 % of gas phase. The organic matter content was found to be 0.14 to 2.52 %.

• Journal of Life Science
• /
• v.22 no.10
• /
• pp.1392-1398
• /
• 2012

This study investigated the effects of diet of different forages on growth performance and carcass characteristics of Hanwoo steers. Twenty-one Hanwoo steers were randomly allocated to three groups (fed hay, reed, and reed with rice straw) of seven steers each. Initial and final body weights of control, T1, and T2 groups were 125.5, 128.3, 128.3 kg and 697.4, 614.6, 706.7 kg, respectively. Average daily gain tended to increase in controls (0.70 kg/d) and the T2 group (0.71 kg/d) but not as much in the T1 group (0.60 kg/d); however, there was no significant difference. DMI was not significantly different among the treatment groups, but T1 was relatively lower than the other groups. For the yield traits, carcass weight was not significantly different between controls and the T2 group but was greater in the T2 group compared to the T1 group (p<0.05). Back fat thickness and rib eye area were higher in controls and T2 compared to T1; yield grade (A:B:C, %) was greater in T1 (43:57:0) compared to the other groups (control 0:71:29; T2 29:42:29). For the quality traits, fat color and texture were not significantly different among groups. However, meat color and maturity were significantly greater in T1 compared to T2 (p<0.05). Marbling score and appearance rate of over 1st meat quality grade were greater in the control and T2 groups compared to the T1 group. Based on the results, growth performance, feed utilization, and carcass traits appeared to improve when roughage containing rice straw plus reed was offered. Therefore, reed is worth considering as a roughage source for fattening Hanwoo steers.

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.27-33
• /
• 2007

Purpose: We have performed SRS (stereotactic radiosurgery) for avm (arterry vein malformation) and brain cancer. In order to verify dose and localization of SRS, dose distributions from TPS ($X-Knife^{(R)}$ 3.0, Radionics, USA) and GafChromic $EBT^{(R)}$ film in a head phantom were compared. Materials and Methods: In this study, head and neck region of conventional humanoid phantom was modified by substituting one of 2.5 cm slap with five 0.5 cm acrylic plates to stack the GafChromic $EBT^{(R)}$ film slice by slice with 5 mm intervals. Four films and five acrylic plates were cut along the contour of head phantom in axial plane. The head phantom was fixed with SRS head ring and adapted SRS localizer as same as real SRS procedure. CT images of the head phantom were acquired in 5 mm slice intervals as film interval. Five arc 6 MV photon beams using the SRS cone with 2 cm diameter were delivered 300 cGy to the target in the phantom. Ten small pieces of the film were exposed to 0, 50, 100, 200, 300, 400, 500, 600, 700, 800, 900 cGy, respectively to calibrate the GafChromic $EBT^{(R)}$ film. The films in the phantom were digitized after 24 hours and its linearity was calibrated. The pixel values of the film were converted to the dose and compared with the dose distribution from the TPS calculation. Results: Calibration curve for the GafChromic $EBT^{(R)}$ film was linear up to 900 cGy. The R2 value was better than 0.992. Discrepancy between calculated from $X-Knife^{(R)}$ 3.0 and measured dose distributions with the film was less than 5% through all slices. Conclusion: It was possible to evaluate every slice of humanoid phantom by stacking the GafChromic EBT film which is suitable for 2 dimensional dosimetry, It was found that film dosimetry using the GafChromic $EBT^{(R)}$ film is feasible for routine dosimetric QA of stereotactic radiosurgery.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.593-606
• /
• 2005

Present study was conducted to investigate the optimal feeding levels for producing the high quality meat on the basis of the information deriving from the comparison of the growth performance and carcass characteristics among breeds(Holstein vs F1, Holstein♀×Hanwoo♂), sex(steer vs heifer) and interaction between breed and sex. Thirty two animals on 4 treatments(i.e. eight head each) were used for 540 days from seven to 24 months of age. The results obtained are summarized as follows; the range of average daily gains was 0.733 to 1.018, 0.994 to 1.255, 0.947 to 1.259 and 0.736 to 0.824kg for the growing, the early-fattening, the mid- fattening and the finishing periods, respectively. The range of average daily gains for the entire period was 0.882 to 1.061kg. The gains were higher for Holstein(7.3%) and the steers(10.5%) than F1 and the heifers, respectively. Concentrates and total digestible nutrients intakes per kg gain were higher for Holstein and the heifers than F1 and the steers, respectively. These findings may indicate that feed utilization is higher for Holstein than F1, and higher for the steers than the heifers. In carcass characteristics, back fat thickness was thicker for Holstein than F1, and rib-eye area was smaller for Holstein than F1. The rib-eye area per kg carcass weight was larger for F1 and the heifers than Holstein and the steers, respectively. Meat color was better for Holstein than F1, but the sex distinction did not show any differences. In physicochemical properties of longissimus dorsi, shear force, cooking loss, water holding capacity and the panel test scores of juiciness, tenderness and flavor for F1 and the heifers were better than those for Holstein and the steers, respectively. According to the above results, we may conclude that F1 and heifers rather than Holstein and steers are recommended for high quality meat production. In steers and heifers of Holstein and F1, the optimal feeding levels may be 1.9% of apparent body weight for concentrates and 25% of concentrates intake for rice straw.