• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.3
• /
• pp.49-53
• /
• 2001

Vortical etching experiments of ($SrBi_2Ta_2O_9$)/Si thin films have been performed by using the inductively coupled plasma reactive ion etching (ICP-ME) apparatus. The purposes of these experiments are to get the effective area of vertical surface. Because this technology is very important to get good qualities of ferroelectric gate structure, capacitor and the minimum parasitic effects related to the excellent performances of the FRAM (Ferroelectric Random Access Memory) device. The reacting gases were Ar and $Cl_2$gases, and various $Ar/C1_2$flow ratios were used. The etching experiments were carried out at various RF powers such as 700, 700, 500W and at various DC powers such as 200, 150, 100, 50W, respectively. The maximum etch rate of $SrBi_2Ta_2O_9$/Si thin films was 1050 A/min at the $Ar/C1_2$ gas ratio of 20/16, RF power of 700 W and DC power of 200 W. From the SEM (scanning electron microscopy) image of the SBT thin films, the wall angle was as good as about $82^{\circ}$.

• Journal of the Korean Institute of Gas
• /
• v.15 no.2
• /
• pp.9-14
• /
• 2011

A set of test was conducted on a SA-372 steel for CNG storage tank to study the effect of hydrogen embrittlement. Tensile tests were carried out several conditions such as CNG, HCNG and H2 gas environment including air and Ar under the 35 MPa. Also, the test speed was set at 4*10^-4/s and 4*10^-5/s respectively. To maintain the high pressure for environmental gas during test process, we chose MTS which was installed autoclave. Test results showed that tensile stress, elongation rate and cross sectional contraction under Ar and CNG charging condition were similar to that of reference of air. And there was little bit change with test speed variations. However, hydrogen added conditions such as HCNG and H2 were revealed noticeable change in elongation rate and cross sectional contraction. Tensile stress was still uniform for all conditions. From the results, the effect of hydrogen embrittlement was confirmed on the hydrogen enriched conditions. Also its effect was showed more strong with much hydrogen concentration and slower test speed.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.871-879
• /
• 2020

The purpose of this study was to analysis the correlation between kidneys function indicators and these size in ultrasonography. A total of 170 (male:86, female:84) patients of sex and age groups were examined by abdominal ultrasonography. The patients classified as those in their 20's, 30's, 40's, and over 50's. We measured the length, width, and cross-sectional height of the kidneys twice. At this time, the length of these were measured from the maximum upper to the maximum lower pole and the widest width in the same ultrasonography was measured to obtain the cross-sectional area. Other relevant indicators included body surface area, serum creatinine, glomerular filtration rate (GFR), MDRD (Modification of diet in renal disease) and C-G (Cockcroft-Gault). Significant comparisons of differences between relevant factors by age groups and sex were conducted with a one-way distribution analysis. Correlation analysis was also performed between relevant factors by using Pearson and Spearman correlation coefficient. It was defined as meaningful when the p-value was less than 0.05. As a result, the length, the width, and the cross-sectional area of kidneys were correlated with GFR, C-G, MDRD. Therefore, it is expected that the accuracy of diagnosis of kidneys disease will be increased if the relevant indicators are evaluated together rather than measuring only length of these in ultrasonography.

• Tunnel and Underground Space
• /
• v.19 no.1
• /
• pp.19-30
• /
• 2009

For the purpose of determining the thickness of concrete lining and detect of the cavity where may be located behind tunnel lining, IE (Impact-Echo) method it effectively useful in the tunnel safety diagnosis and the quality control during the construction. As a part of case study, we applied IE method to various tunnel structure types such as road tunnel and subway tunnel constructed by NATM (New Austrian Tunnelling Method) and ASSM (American Steel Support Method). As tunnel specifications estimated from this method were compared with coring data, design drawing and other survey results, it was very good agreement with each other. In conclusion, we verified that IE method shows an accurate and reliable result. The conventional interpretation of IE method in frequency domain gives only vertical information at a certain point. However, the interpretation using time-frequency analysis and depth section imaging technique from two dimensional profiling surveys can show more reliable information about structure inside.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.5
• /
• pp.549-556
• /
• 2010

In general, materials that can be used to form elastic pads, such as urethane and rubber, are often used in flexible forming processes by inserting the pads between a blank and flexible die for smoothing the forming surface that is formed by a reconfigurable die. In this study, the effects of the elastic pad on formability in the flexible forming process for sheet metals are investigated by performing numerical simulations. In the simulation, the hyperelastic material model is used, where the urethane elastic pads serve as elastic cushions. Case studies are carried out for elastic materials with different hardness values and thicknesses. The results are used to evaluate formability by comparing the configuration of the deformed blank and its major cross-sectional profiles. It is verified that the elastic pad used in the flexible forming process for sheet materials should be hard and that its thickness should be chosen appropriately.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.511-519
• /
• 2020

The aim of this study was to translate and validate the revised Nottingham Sensory Assessment(rNSA) in Republic of Korea. A cross-sectional study was conducted to translate the rNSA into Korean using a modified forward/backward translation procedure. Inter-rater and intra-rater reliability, internal consistency, and concurrent validity were investigated to validate the Korean version rNSA. The Korean version rNSA showed excellent inter-rater reliability (r=0.92-1.00) and intra-rater reliability (r=0.93-1.00). Significant correlations were found between sensory assessment results of the Korean version of the rNSA and the Korean Fugl Meyer Assessment Sensory subscales (r=0.96). The Cronbach α value of internal consistency of Korean version rNSA was ranged from 0.73 to 0.90, the value of K-FMA-S was ranged from 0.70 to 0.88. In these results, psychometric properties of the Korean version of the rNSA achieved the standard level and can be feasible in clinical practice to assess sensory function following stroke in Republic of Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2014

Purpose: Implant engine system is composed of the handpiece, micromotor, control box and foot switch. The aim of this study was to evaluate the satisfaction of the implant engine systems in terms of convenience-design and to examine the relation with the experience of implant surgery. Materials and Methods: Three implant systems were evaluated: SurgicXT/X-SG20L, INTRAsurg300/CL3-09, XIP10/CRB26LX. For this comparative study, 30 dentists were included and the satisfaction was measured using a structured questionnaire. One-way analysis of the variance (ANOVA) and multiple regression analysis were used within and between the groups. Results: Total satisfaction differed from each other (P < 0.05). The convenience score was more associated with the total satisfaction than design score. Moreover, the implant surgery experience affected several assessments. Conclusion: Collectively, in a cross-sectional study model, the design of implant system significantly affects its total satisfaction and the surgery experience can be influential factor in the evaluation of implant engine system.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.209-215
• /
• 2023

The untact environment brought about by the global pandemic has emerged as a new driving force for the matured social media market. In the post-coronavirus era, there arises a pivotal need for foundational data to reconfigure the operations and utilization strategies of social media. Using data from the 2022 Korean Media Panel Survey, this study compared sociodemographic and personality factors between social media non-users and users, and examined how these factors influenced social media usage time. The findings indicate differences between social media non-users and users in terms of gender, age, education level, income level, employment status, marital status, openness to experience, conscientiousness, extraversion, and neuroticism. Usage time of social media is influenced by gender, age, income level, employment status, conscientiousness, and agreeableness. These results are anticipated to enhance the understanding of users and their usage behaviors for stakeholders in the social media market as they confront a potential second leap forward.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.674-686
• /
• 2011

Choosing a seismic source and geophone type including a coupling method can be the most important factor in shallow seismic surveys. We studied the characteristics of seismic signals by analyzing 6 different seismic data sets that collected from several sources and geophone conditions. Geophones attached to weight plate (1.8 kg) can be easily and economically installed on the paved road where geophones with spikes would cause the coupling problem. In addition, experiments in this study revealed that a small handy hammer can be used as a seismic source by striking the paved road to generate the seismic signals within 200 ms two-way travel time. Attaching weight plates to geophones may change the geophone response curve which generally depends on the geophone mass, but the change seems not to give significant differences in the first arrival of refracted wave and in the pattern of reflection events. Consequently, using weight plates on paved roads can be an efficient and cost-saving method in the near-surface high-resolution seismic surveys.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.107-114
• /
• 2010

This study was undertaken to suggest a Pinus densiflora community planting model in the central cool temperate zone of Korea and nearby areas. For the purpose of this study, we surveyed various DBH classes of the P. densiflora community in Dangjin-gun, Choongchungnam-do. We surveyed the size of entire individuals in the 92 plots as well as surveyed the location of individuals in each tree layer and sub-tree layer(1/100 scale) of 44 plots using a quadrant method from young to old communities. As a result of analysis, the tree layer was growing well but the basal areas of the subtree layer were less than 10% compared with the tree-layer. This indicates the subtree layer is not in general growing well in the P. densiflora community. There were no significant patterns in the shrub layer. A P. densiflora community planting would consist of a tree layer and a shrub layer and the finding of growth patterns of the tree layer is significant. In order to make a model of the shrub layer, an additionally survey of another shrub layer is needed in a nearby planting area. Both regression models, 1) between tree layer DBHs and individuals per unit area, and 2) between individuals per unit area and shortest distances of individuals, can yield much information through study.