• The Korean Journal of Mycology
• /
• v.29 no.1
• /
• pp.34-40
• /
• 2001

RAPD test and the observation of morphological, cultural characteristics of fourteen selected entomogenous fungi were conducted to investigate the analysis of their internal relationships. Paecilomyces tenuipes showed snow flower form attached to numerous white conidiophores, produced globular and semi-egg types on the club types of phialides. Cordyceps militaris formed globosely conidiophores, dark yellow fruiting body on pupa. The phialide as on Acremonium-type in global conidiophores. Beauveria bassiana covered with conidia was not formed fruiting body and adhered conidia on conidiophore of zigzag type. The PDA and SDAY medium were confirmed as an optimum growth of them. P. tenuipes showed to velvet and plane types in several media whereas C. militaris was belong to centrally raised and floccose in the morphological type. In contrast, B. bassiana covered with conidia on velvet shape. The size of amplified products were analyzed by RAPD using URP primer and were from 100 bp to 2.0 kb with $10{\sim}14$ geuomic DNA. Total similarities of two groups were by dendrogram of UPGMA analysis. The homology of P. tenuipes groups was 94.8 to 100%. It also showed 70.1 to 96.6% in C. militaris group and B. bassiana was higher similarity than any other. The internal change of C. militaris, produced telemorph fruiting body, was higher seperated in species than P. tenuipes and B. bassiana in the RAPD.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.1-6
• /
• 2003

The study is to automatically or semi-automatically detect the accurate contour of tumors or lesions using active contour models (Snakes) in the MRI images of the brain. In the study we have improved the energy-minimization problem of snakes using dynamic programming and have utilized the values of the canny edge detector by the image force to make the snake less sensitive in noises. For the extracted boundary, the inside area, the perimeter and its center coordinates could be calculated. In addition, the multiple 2D slices with the contour of the lesion wore combined to visualized the shape of the lesion in 3D. We expect that the proposed method in this paper will be useful to make a treatment plan as well as to evaluate the treatments.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.77.2-77.2
• /
• 2010

스크린 프린팅을 이용한 태양전지에서 전극소성 시 알루미늄 후면 전극이 실리콘으로 확산되어 후면전계(Back Surface Field)를 형성한다. 후면전계 형성시 알루미늄과 후면전계 사이에 알루미늄-실리콘 합금이 형성된다. 이 알루미늄-실리콘 합금은 알루미늄 후면전극의 전기전도도 및 휨현상, bead 형성 등에 영향을 끼친다. 본 논문은 알루미늄 페이스트에 첨가된 Glass frit이 알루미늄-실리콘 합금 형성에 끼치는 영향을 관찰하였다. 분산제, 유기바인더, 알루미늄을 섞어 1개의 페이스트를 만들었고, Glass frit을 1%, 2%, 3%, 4%, 5% 씩 첨가하여 총 6개의 알루미늄 페이스트를 만들었다. 절삭손상이 제거된 실리콘 기판의 후면에 알루미늄 페이스트를 스크린 프린팅하여 전극을 소성하였다. 주사전자 현미경(SEM)을 사용하여 시편의 단면사진으로부터 Glass frit 함량에 따른 알루미늄-실리콘 합금층의 변화를 관찰하였다. Glass frit이 첨가되지 않은 페이스트는 소성 후 알루미늄-실리콘 합금이 두껍게 형성되었으나, Glass frit이 첨가된 페이스트는 소성 후 알루미늄-실리콘 합금이 얇게 형성되는 결과를 얻었다. 또한 Glass frit을 첨가함에 따라 표면의 원형 모양의 무늬가 작아지면서 3%부터는 사라지는 것을 확인할 수 있었다.

• The Journal of Korean Association of Computer Education
• /
• v.9 no.1
• /
• pp.89-95
• /
• 2006

The local geometric properties such as curvatures and normal vectors play important roles for analyzing the local shape of objects in the fields of computer graphics and computer vision. The result of the geometric operations such as mesh simplification and mesh smoothing is dependent on how to compute the curvatures of meshes because there is no exact mathematical definition of curvature at vertices on 3D meshes. Therefore, In this paper, we indicate the fatal error in computing the sectional curvatures of the most previous discrete curvature estimations. Moreover, we present a discrete curvature estimation to overcome the error, which is based on the parabola interpolation and the geometric properties of Bezier curves. Therefore, We can well distinguish between the sharp vertices and the flat ones, so our method may be applied to a variety of geometric operations.

• Korean Journal of Ichthyology
• /
• v.20 no.3
• /
• pp.163-166
• /
• 2008

The spermatozoal ultrastructure of Acheilognathus yamatsutae was studied using transmission electron microscopy. The mature spermatozoa are similar to those of other cyprinids as follows: a spherical nucleus with a shallow nuclear fossa, a short midpiece containing mitochondria and a long flagellum. However, there are some differences from other cyprinids in the orientation and position of the centrioles, the number of mitochondria, and the structure of vesicles. The position of the proximal centriole was of two types: one located on the side of nucleus decline, the other situated on the opposite side.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.176-176
• /
• 2001

목적： 기존의 역수신코일(inside-out receiver coil)로 관벽의 MR 영상을 얻을 때 영상영역이 좁고 수신감도가 불균일한 단점을 보완하면서 신호대 잡음비(S/N ratio)도 높일 수 있는 회전자계역수 신코일(quadratic inside-out receiver coil)의 개발을 목적으로 한다. 대상 및 방법： 8극형코일, 선형자계수신코일, 회전자계수신코일에 대하여 컴퓨터 모의실험으로 영상영역 및 감도의 균일성을 비교하였다. 회전자계수신코일은 안장 모양을 한 두 개의 선형자계코일이 서로 간섭이 일어나지 않도록 수직 방향으로 배열된 구조를 갖도록 하였다. 지름 3 cm 크기로 각 코일을 제작하였으며 지름 20 cm의 원통 중앙에 내경 4 cm의 관이 있는 팬텀을 만들어 MnC1$_2$를 섞은 물을 채운 다음 1.5T 초전도 MRI 장치와 0.3T 영구자석 MRI 장치에서 팬텀의 관벽 영상을 얻었다. 본 실험을 시행한 1.5T 장치의 구조 때문에 회전자계코일의 두 안장코일을 결합하는 회로를 제작하여 사용하였고 0.3T에서는 장치에 내장된 결합회로를 사용하였다. 또한 포르말린 용액에 보관된 소의 대장 조직 단면 영상을 FOV 10-12 cm로 얻어 회전자 계안장코일의 성능을 평가하였다.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.15-25
• /
• 2003

To evaluate the effect of trapped air bubbles in horizontal drains on discharge capacity, unsaturated discharge capacity tests are carried out for four types of drains selected according to the size of section as well as the shape of core. Unsaturated discharge capacities with the elapse of time, the increase of confining pressures, and hydraulic gradients are examined and are compared with saturated discharge capacities. It is found that the unsaturated discharge capacities at a hydraulic gradient of 0.01 decreased by 17%~80% due to the remained air bubbles in the drains compared with the saturated discharge capacities. It is caused by the fact that the horizontal direction of water flow is not consistent with the direction of movement of floating air bubbles in case of horizontal drains. Especially, far the drain with filament shaped core, discharge capacities decreased significantly due to the difficulty in removing air bubbles.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.1-7
• /
• 2003

Anatomical and physical characteristics of damaged wood by forest fire and sound wood of Pinus densiflora were examined. Granular substances were found in resin canals, epithelial cells and ray parenchyma cells of damaged wood, but the other distinctive marks of wood structure in damaged wood were not observed. Damaged wood showed slightly higher relative crystallinity in outermost growth ring than sound wood. Green moisture content and water absorptions both in tangential and radial sections of damaged wood were lower than those of sound wood. There were no significant differences in shrinkage, swelling and basic density between damaged and sound woods.

• Journal of the Korean Society of Radiology
• /
• v.2 no.2
• /
• pp.31-38
• /
• 2008

Line scan diffusion weighted imaging (LSDI) pulse sequence for 0.32 T magnetic resonance imaging (MRI) system was developed. In the LSDI pulse sequence, the imaging volume is formed by the intersection of the two perpendicular planes selected by the two slice-selective $\pi$/2-pulse and $\pi$-pulse and two diffusion sensitizing gradients placed on the both side of the refocusing $\pi$-pulse and the standard frequency encoding readout was followed. Since the maximum gradient amplitude for the MR system was 15 mT/m the maximum b value was $301.50s/mm^2$. Using the developed LSDI pulse sequence, the diffusion weighted images for the aqueous NaCl solution phantom and triacylglycerol solution phantom calculated from the line scan diffusion weighted images gives the same results within the standard error range (mean diffusivities = $963.90{\pm}79.83({\times}10^{-6}mm^2/s)$ at 0.32 T, $956.77{\pm}4.12({\times}10^{-6}mm^2/s)$ at 1.5 T) and the LSDI images were insensitive to the magnetic susceptibility difference and chemical shift.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.10
• /
• pp.377-382
• /
• 2018

This study deals with internal state and tissue density analysis methods for red ginseng grade determination. For internal measurement of red ginseng, there have been various studies on nondestructive testing methods since the 1990s, It was difficult to grasp the most important inner hole and inside whites in the grading. So in this study, we developed a closed capturing device for infra-red illumination environment, and developed an internal measurement system that can detect the presence and diameter of inner hole and inside whites. Made devices consisted of infrared lights with a high transmission rate of red ginseng in 920 nanometer wave band, a infra-red camera and a Y axis actuator with a red ginseng automatically controlled focus on the camera. The proposed algorithm performs an auto-focus system on the Y-axis actuator to automatically adjust the sharp focus of the object according to the size and thickness. Then red ginseng is rotated $360^{\circ}$ at $1^{\circ}$ intervals and 360 total images are acquired, and reconstructed as a sinogram through Radon transform and Back-projection algorithm was performed to acquire internal images of red ginseng. As a result of the algorithm, it was possible to acquire internal cross-sectional image regardless of the thickness and shape of red ginseng. In the future, if more than 10,000 different shapes and sizes of red ginseng internal cross-sectional image are acquired and the classification criterion is applied, it can be used as a reliable automated ginseng grade automatic measurement method.