• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.93-109
• /
• 2020

Purpose: The radiochromic film (Gafchromic EBT3, Ashland Advanced Materials, USA) and 3-dimensional analysis system dosimetry checkTM (DC, MathResolutions, USA) were evaluated for patient-specific quality assurance (QA) of helical tomotherapy. Materials and Methods: Depending on the tumors' positions, three types of targets, which are the abdominal tumor (130.6㎤), retroperitoneal tumor (849.0㎤), and the whole abdominal metastasis tumor (3131.0㎤) applied to the humanoid phantom (Anderson Rando Phantom, USA). We established a total of 12 comparative treatment plans by the four geometric conditions of the beam irradiation, which are the different field widths (FW) of 2.5-cm, 5.0-cm, and pitches of 0.287, 0.43. Ionization measurements (1D) with EBT3 by inserting the cheese phantom (2D) were compared to DC measurements of the 3D dose reconstruction on CT images from beam fluence log information. For the clinical feasibility evaluation of the DC, dose reconstruction has been performed using the same cheese phantom with the EBT3 method. Recalculated dose distributions revealed the dose error information during the actual irradiation on the same CT images quantitatively compared to the treatment plan. The Thread effect, which might appear in the Helical Tomotherapy, was analyzed by ripple amplitude (%). We also performed gamma index analysis (DD: 3mm/ DTA: 3%, pass threshold limit: 95%) for pattern check of the dose distribution. Results: Ripple amplitude measurement resulted in the highest average of 23.1% in the peritoneum tumor. In the radiochromic film analysis, the absolute dose was on average 0.9±0.4%, and gamma index analysis was on average 96.4±2.2% (Passing rate: >95%), which could be limited to the large target sizes such as the whole abdominal metastasis tumor. In the DC analysis with the humanoid phantom for FW of 5.0-cm, the three regions' average was 91.8±6.4% in the 2D and 3D plan. The three planes (axial, coronal, and sagittal) and dose profile could be analyzed with the entire peritoneum tumor and the whole abdominal metastasis target, with planned dose distributions. The dose errors based on the dose-volume histogram in the DC evaluations increased depending on FW and pitch. Conclusion: The DC method could implement a dose error analysis on the 3D patient image data by the measured beam fluence log information only without any dosimetry tools for patient-specific quality assurance. Also, there may be no limit to apply for the tumor location and size; therefore, the DC could be useful in patient-specific QAl during the treatment of Helical Tomotherapy of large and irregular tumors.

• Journal of the Daesoon Academy of Sciences
• /
• v.39
• /
• pp.33-67
• /
• 2021

This paper aims at revealing the core concept of Injon (Human Nobility). The concept of Injon is one of the salient fundamental ideas which makes Daesoon Jinrihoe recognizable as Daesoon Jinrihoe. The concept of Injon has the basic meaning of 'human nobility,' but within the context wherein the nobility of humankind is considered to be greater than the nobility of Heaven and Earth. Although the religious and ideological interpretations of Injon (human nobility) that have developed over time have been quite diverse and abundant, these interpretations are all limited in that they generally assume the relationship between 'Heaven and Earth' and 'Humanity' to be antagonistic. However, if human nobility is relativized in that manner, it can reduce the potential broader meanings of mutual beneficence and the earthly paradise of the later world. These interpretations are grounded in the view of semiotic interpretation. Such interpretations have composed their view point via the semiotic meaning of the words. The semiotic point of view suggests that meanings of words consist in the relation of the word and the object to which it denotes. We will introduce a new view point which can be termed the transcendental view point. This view focuses on how the exact interpretation of words and sentences depends on the comprehension of the triad of systematic relations among the word, object, and speaker. In the Daesoon Thought, the Former World is considered to be the world wherein all creations unfolded according to the principle of mutual contention. This led to the accumulation of grievances and grudges which condensed and filled the Three Realms of Heaven, Earth, and Humanity. The Former World was dominated by Western material civilization, selfishness, and exclusivism. It was also a world where humans suffered from various natural disasters such as floods, droughts, plagues, and wildfires. The Former World lost the constant Dao and was overwhelmed with all kinds of disasters and calamities. That world fell into various kinds of wretchedness. The causes which made the Former World so cruel came from humans misunderstanding their relation to nature and life in general; including human life. The anthropocentric modern cosmology insisted that the human race was the only one to have the powers and rights to exercise dominion over nature. On the other hand, there is the Later World, which means the ideal and perfect, immanent eternal world for all humankind in Daesoon Thought. This world consists of life, peace, and equality and is also characterized by three typical attributes: goodness, peace, and all kinds of life. All living beings previously struggled for survival, but in the Later World, those lifeforms will embrace each other; even across different realms. In Daesoon Thought, the world and cosmos contain diverse forms of life, and human have both an earthly life and life in the after world should they die before the Later World. There are also the lives of divine beings and animals, and other such living entities. Daesoon Thought subsumes pan-vitalism, which allows they acknowledgement of myriad possible lifeforms. The concept of the Later World in Daesoon Thought, which mainly revealed in The Canonical Scripture and the words of Sangje (Kang Jeungsan), suggests that all kinds of life, including humans, animals, and even spirits in the afterworld, can live together in a perfect coming earthly paradise which is immanent. The concept of Injon can be interpreted though the view of transcendental pragmatics as an alternative to the typical views discussed in Daesoon Thought. Thinkers should attempt to improve current discourse on Injon in Daesoon Thought by focusing on the point that all kinds the original teachings demonstrate a value of all lifeforms. Therein, Injon would indicate not only the human nobility and dignity but also the nobility and dignity of divine beings, divine humans, and all other forms of life that have existed across time. The dimension of time allows for recognition of lifeforms from the Former World, the afterworld, and the Later World. This revised appraisal of Injon could further accommodate denizens of the afterworld, animals, ghosts and spirits, the earth and cloud souls of humans, and other lifeforms held to exist in the cosmology of Daesoon Thought.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.26 no.2
• /
• pp.20-31
• /
• 2022

Purpose Broad Quantification Calibration(B.Q.C) is the procedure for Quantitative Analysis to measure Standard Uptake Value(SUV) in SPECT/CT scanner. B.Q.C was performed with Tc-99m, I-123, I-131, Lu-177 respectively and then we acquired the phantom images whether the SUVs were measured accurately. Because there is no standard for SUV test in SPECT, we used ACR Esser PET phantom alternatively. The purpose of this study was to lay the groundwork for Quantitative Analysis with various isotopes in SPECT/CT scanner. Materials and Methods Siemens SPECT/CT Symbia Intevo 16 and Intevo Bold were used for this study. The procedure of B.Q.C has two steps; first is point source Sensitivity Cal. and second is Volume Sensitivity Cal. to calculate Volume Sensitivity Factor(VSF) using cylinder phantom. To verify SUV, we acquired the images with ACR Esser PET phantom and then we measured SUV_mean on background and SUV_max on hot vials(25, 16, 12, 8 mm). SPSS was used to analyze the difference in the SUV between Intevo 16 and Intevo Bold by Mann-Whitney test. Results The results of Sensitivity(CPS/MBq) and VSF were in Detector 1, 2 of four isotopes (Intevo 16 D1 sensitivity/D2 sensitivity/VSF and Intevo Bold) 87.7/88.6/1.08, 91.9/91.2/1.07 on Tc-99m, 79.9/81.9/0.98, 89.4/89.4/0.98 on I-123, 124.8/128.9/0.69, 130.9, 126.8/0.71, on I-131, 8.7/8.9/1.02, 9.1/8.9/1.00 on Lu-177 respectively. The results of SUV test with ACR Esser PET phantom were (Intevo 16 BKG SUV_mean/25mm SUV_max/16mm/12mm/8mm and Intevo Bold) 1.03/2.95/2.41/1.96/1.84, 1.03/2.91/2.38/1.87/1.82 on Tc-99m, 0.97/2.91/2.33/1.68/1.45, 1.00/2.80/2.23/1.57/1.32 on I-123, 0.96/1.61/1.13/1.02/0.69, 0.94/1.54/1.08/0.98/ 0.66 on I-131, 1.00/6.34/4.67/2.96/2.28, 1.01/6.21/4.49/2.86/2.21 on Lu-177. And there was no statistically significant difference of SUV between Intevo 16 and Intevo Bold(p>0.05). Conclusion Only Qualitative Analysis was possible with gamma camera in the past. On the other hand, it's possible to acquire not only anatomic localization, 3D tomography but also Quantitative Analysis with SUV measurements in SPECT/CT scanner. We could lay the groundwork for Quantitative Analysis with various isotopes; Tc-99m, I-123, I-131, Lu-177 by carrying out B.Q.C and could verify the SUV measurement with ACR phantom. It needs periodic calibration to maintain for precision of Quantitative evaluation. As a result, we can provide Quantitative Analysis on follow up scan with the SPECT/CT exams and evaluate the therapeutic response in theranosis.

• The Journal of Korean Society for Radiation Therapy
• /
• v.34
• /
• pp.73-82
• /
• 2022

Purpose: The purpose of this study is to evaluate the effectiveness of reducing the absorbed dose to the ovaries and the quality of the CBCT image when using the Halcyon^TM Fast kV CBCT of cervical cancer patients of child-bearing age who performed ovarian transposition Materials and Methods : Contouring of the cervix and ovaries required for measurement was performed on the computed tomography images of the human phantom (Alderson Rando Phantom, USA), and three Optically Stimulated Luminescence Dosimeter(OSLD) were attached to the selected organ cross-section, respectively. In order to measure the absorbed dose to the cervix and ovaries in the Truebeam^TM pelvis mode (Hereinafter referred to as TP), The Halcyon^TM Pelvis mode (Hereinafter referred to as HP) and The Halcyon^TM Pelvis Fast mode (Hereinafter referred to as HPF), An image was taken with a scan range of 17.5 cm and also taken an image that reduced the Scan range to 12.5cm. A total of 10 cumulative doses were summed, It was replaced with a value of 23 Fx, the number of cervical cancer treatments, and compared In additon, uniformity, low contrast visibility, spatial resolution, and geometric distortion were compared and analyzed using Catphan 504 phantom to compare CBCT image quality between equipment. Each factor was repeatedly measured three times, and the average value was obtained by analysing with the Doselab (Mobius Medical Systems, LP. Versions: 6.8) program. Results: As a result of measuring absorbed dose by CBCT with OSLD, TP and HP did not obtain significant results under the same conditions. The mode showing the greatest reduction value was HPF versus TP. In HPF, the absorbed dose was reduced by 39.8% in the cervix and 19.8% in the ovary compared to the TP in the scan range of 17.5 cm. the scan range was reduced to 12.5 cm, absorbed dose was reduced by 34.2% in the cervix and 50.5% in the ovary. In addition, result of evaluating the quality of the image used in the above experiment, it complied with the equipment manufacturer's standards with Geometric Distortion within 1mm (SBRT standard), Uniformity HU, LCV within 2.0%, Spatial Resolution more than 3 lp/mm. Conclusion: According to the results of this experiment, Halcyon^TM can select more various conditions than Truebeam^TM in treatment of fertility woman who have undergone ovarian Transposition , because it is important to reduce the radiation dose by CBCT during radiation therapy. So finally we recommend Halcyon^TM Fast kV CBCT which maintains image quality even at low mAs. However, it is consider that the additional exposure to low doses can be reduced by controlling the imaging range for patients who have undergone ovarian transposition in other treatment machines.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.104
• /
• pp.70-100
• /
• 2023

The celadon made in the Goryeo era, a time when Buddhism was flourishing in Korea, naturally contains many elements of Buddhist culture. Among them, inlaid celadon with Sanskrit inscriptions bears a close relationship with esoteric Buddhism. However, the research on deciphering the Sanskrit inscriptions has made little progress due to the small number of extant examples. However, the four recent excavations at the No. 23 kiln site in Sadang-ri, Gangjin have yielded new materials that allow the existing materials to be categorized into several types. The results obtained through the reading and interpretation of the inscriptions are as follows: First, the Sanskrit characters inlaid on the celadon were parts of mantras. Inscriptions where only one character is apparent cannot be deciphered, but scholars have revealed that others are written in the manner of a wheel mantra represent the "Mantra for Purifying the Dharma-Realm," "Six-Syllable Mantra of the Vidyaraja," "Sweet Dew Mantra," "Jewel Pavilion Mantra," "Mantra of the Savior Bodhisattva," "Dharani of the Mind of the Budha of Infinite Life," and "Mantra for Extinguishing Evil Rebirth." Each mantra was written in Siddham script. Second, they are believed to have been produced during the thirteenth and fourteenth centuries based on the arrangement of the inscriptions and the way the "Sweet Dew Mantra" is included in the "40 Hands Mantra." In particular, the celadon pieces with a mantra inlaid in a concentric manner are dated to the late thirteenth and early fourteenth centuries based on their production characteristics. Third, the interpretation of the inlaid mantras suggests that they all refer to the "Shattering Hell" and "Rebirth in the Pure Land." Based on this, it can be concluded that some of these inlaid celadon wares with mantras may have been used in Buddhist rituals for the dead, such as the ritual for feeding hungry ghosts (施餓鬼會). Also, because the Sadang-ri No. 23 kiln site and the "ga" area of the site are believed to have produced royal celadon, it is likely that these rituals were performed at the royal court or a temple under its influence. Fourth, this inlaid Goryeo celadon with Sanskrit mantras was not a direct influence of the ceramics of Yuan China. It emerged by adopting Yuan Chinese Buddhist culture, which was influenced by Tibetan Buddhism, into Goryeo Korea's existing esoteric practices. Fifth, the celadon wares inlaid with a Sanskrit mantra reveal a facet of the personal esoteric rituals that prevailed in late Goryeo society. Changes in esotericism triggered by the desire for relief from anxieties can be exemplified in epitaph tablets and coffins that express a shared desire for escaping hell and being born again in paradise. Sixth, the inlaid celadon with Sanskrit mantras shares some common features with other crafts. The similarities include the use of Siddham Sanskrit, the focus on Six-Syllable Mantra of the Vidyaraja, the correspondence with the contents of the mantras found on Buddhist bells, wooden coffins, and memorial tablets, and their arraignment in a similar manner with rooftiles. The major difference between them is that the Mantra for Extinguishing Evil Rebirth and the Sweet Dew Manta have not yet been found on other craftworks. I believe that the inscriptions of Sanskrit mantras are found mainly on inlaid celadon vessels due to their relatively low production cost and efficiency.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.16-36
• /
• 1984

It is very important in forestry to study the shear strength of weathered granitic soil, because the soil covers 66% of our country, and because the majority of land slides have been occured in the soil. In general, the causes of land slide can be classified both the external and internal factors. The external factors are known as vegetations, geography and climate, but internal factors are known as engineering properties originated from parent rocks and weathering. Soil engineering properties are controlled by the skeleton structure, texture, consistency, cohesion, permeability, water content, mineral components, porosity and density etc. of soils. And the effects of these internal factors on sliding down summarize as resistance, shear strength, against silding of soil mass. Shear strength basically depends upon effective stress, kinds of soils, density (void ratio), water content, the structure and arrangement of soil particles, among the properties. But these elements of shear strength work not all alone, but together. The purpose of this thesis is to clarify the characteristics of shear strength and the related elements, such as water content ($w_o$), void ratio($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$), and the interrelationship among related elements in order to decide the dominant element chiefly influencing on shear strength in natural/undisturbed state of weathered granitic soil, in addition to the characteristics of soil hardness of weathered granitic soil and root distribution of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands. For the characteristics of shear strength of weathered granitic soil and the related elements of shear strength, three sites were selected from Kwangju district. The outlines of sampling sites in the district were: average specific gravity, 2.63 ~ 2.79; average natural water content, 24.3 ~ 28.3%; average dry density, $1.31{\sim}1.43g/cm^3$, average void ratio, 0.93 ~ 1.001 ; cohesion, $ 0.2{\sim}0.75kg/cm^2$ ; angle of internal friction, $29^{\circ}{\sim}45^{\circ}$ ; soil texture, SL. The shear strength of the soil in different sites was measured by a direct shear apparatus (type B; shear box size, $62.5{\times}20mm$; ${\sigma}$, $1.434kg/cm^2$; speed, 1/100mm/min.). For the related element analyses, water content was moderated through a series of drainage experiments with 4 levels of drainage period, specific gravity was measured by KS F 308, analysis of particle size distribution, by KS F 2302 and soil samples were dried at $110{\pm}5^{\circ}C$ for more than 12 hours in dry oven. Soil hardness represents physical properties, such as particle size distribution, porosity, bulk density and water content of soil, and test of the hardness by soil hardness tester is the simplest approach and totally indicative method to grasp the mechanical properties of soil. It is important to understand the mechanical properties of soil as well as the chemical in order to realize the fundamental phenomena in the growth and the distribution of tree roots. The writer intended to study the correlation between the soil hardness and the distribution of tree roots of Pinus rigida Mill. planted in 1966 and Pinus rigida ${\times}$ taeda in 199 to 1960 in the denuded forest lands with and after several erosion control works. The soil texture of the sites investigated was SL originated from weathered granitic soil. The former is situated at Py$\ddot{o}$ngchangri, Ky$\ddot{o}$m-my$\ddot{o}$n, Kogs$\ddot{o}$ng-gun, Ch$\ddot{o}$llanam-do (3.63 ha; slope, $17^{\circ}{\sim}41^{\circ}$ soil depth, thin or medium; humidity, dry or optimum; height, 5.66/3.73 ~ 7.63 m; D.B.H., 9.7/8.00 ~ 12.00 cm) and the Latter at changun-long Kwangju-shi (3.50 ha; slope, $12^{\circ}{\sim}23^{\circ}$; soil depth, thin; humidity, dry; height, 10.47/7.3 ~ 12.79 m; D.B.H., 16.94/14.3 ~ 19.4 cm).The sampling areas were 24quadrats ($10m{\times}10m$) in the former area and 12 in the latter expanding from summit to foot. Each sampling trees for hardness test and investigation of root distribution were selected by purposive selection and soil profiles of these trees were made at the downward distance of 50 cm from the trees, at each quadrat. Soil layers of the profile were separated by the distance of 10 cm from the surface (layer I, II, ... ...). Soil hardness was measured with Yamanaka soil hardness tester and indicated as indicated soil hardness at the different soil layers. The distribution of tree root number per unit area in different soil depth was investigated, and the relationship between the soil hardness and the number of tree roots was discussed. The results obtained from the experiments are summarized as follows. 1. Analyses of simple relationship between shear strength and elements of shear strength, water content ($w_o$), void ratio ($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$). 1) Negative correlation coefficients were recognized between shear strength and water content. and shear strength and void ratio. 2) Positive correlation coefficients were recognized between shear strength and dry density. 3) The correlation coefficients between shear strength and specific gravity were not significant. 2. Analyses of partial and multiple correlation coefficients between shear strength and the related elements: 1) From the analyses of the partial correlation coefficients among water content ($x_1$), void ratio ($x_2$), and dry density ($x_3$), the direct effect of the water content on shear strength was the highest, and effect on shear strength was in order of void ratio and dry density. Similar trend was recognized from the results of multiple correlation coefficient analyses. 2) Multiple linear regression equations derived from two independent variables, water content ($x_1$ and dry density ($x_2$) were found to be ineffective in estimating shear strength ($\hat{Y}$). However, the simple linear regression equations with an independent variable, water content (x) were highly efficient to estimate shear strength ($\hat{Y}$) with relatively high fitness. 3. A relationship between soil hardness and the distribution of root number: 1) The soil hardness increased proportionally to the soil depth. Negative correlation coefficients were recognized between indicated soil hardness and the number of tree roots in both plantations. 2) The majority of tree roots of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands distributed at 20 cm deep from the surface. 3) Simple linear regression equations were derived from indicated hardness (x) and the number of tree roots (Y) to estimate root numbers in both plantations.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.51-63
• /
• 1981

The results of a crossbreeding experiment with a total of 315 litters and 325 pigs of Berkshires, Hampshires, Durocs, Landraces, Large Whites, eight different two-breed crosses and twelve different three-breed crosses, produced at Livestock Experiment Station from 1975 through 1979, are summarized as follows. 1. Number born alive per litter was largest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by the D♂${\times}$(H♂${\times}$L♀) $F_1$ mating, and smallest in the Hampshires. The pigs in the 3rd-6th parities had larger litter size at birth than those in other parities. 2. Birth weight of pig was heaviest in L♂${\times}$Lw♀ mating and lightest in the Large White. The total litter weight at birth was heaviest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ and Lw♂${\times}$L♀ matings, and was smaller in Hampshires and Birkshires. 3. Litter size at weaning was largest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ and Lw♂${\times}$L♀ matings, and was smaller in Durocs and Hampshires. The pigs in the 3rd-6th parities had larger litter size at weaning than those in other parities. 4. The total litter weight at weaning was heaviest in the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating, followed by H♂${\times}$(Lw♂${\times}$L♀) $F_1$♀ and Lw♂${\times}$L♀ matings, and was lighter in Durocs and Hampshires. The weaning weight of pig was largest in D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ mating and lightest in L♂${\times}$H♀ mating. 5. Survival rate at weaning was highest in L♂${\times}$Lw♀ mating, followed by D♂${\times}$(L♂${\times}$H♀) $F_1$ ♀ and D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ mating, and was lowest in Durocs. 6. The three-breed cross from D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ mating had the highest average gain and lowest feed requirement per unit gain, followed by the D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ and H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ matings. The Birkshires and Landraces ranked lowest among the 25 mating groups compared for both of the traits. Males had higher average daily gain than females by about 0.06kg and had lower feed requirement by about 0.14. 7. The three-breed crosses from D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀, D♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ and H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀ matings reached 90kg body weight at younger age than the other groups. The D♂${\times}$(H♂${\times}$L♀) $F_1$ ♀ group reached 90kg at younger age than the Landrace by 39 days. 8. The dressing percentage and lean meat percentage tended to be higher in H♂${\times}$(Lw♂${\times}$L♀) $F_1$ ♀, H♂${\times}$L♀ and L♂${\times}$B♀ matings compared to the other mating groups. The loin-eye area was largest in the Lw♂${\times}$L♀ mating and smallest in the B♂${\times}$L♀ mating. Males had higher dressing percentage, higher lean meat percentage and lion-eye area than females. The backfat was thinnest in purebred Hampshire and was thickest in B♂${\times}$L♀ mating. 9. The results obtained in this study suggest that the two-breed cross from Lw♂${\times}$L♀ mating, and the three-breed crosses from D♂${\times}$(Lw♂${\times}$L-♀) $F_1$ ♀ and D♂${\times}$(H♂${\times}$L♀) $F_1$♀ matings are superior crossbreds for reproductive and pork prodnction performance.

• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.2
• /
• pp.97-104
• /
• 1979

According to Soil Taxonomy which has been developed over the past 20 years in the soil conservation service of the U. S. D. A, Soils in Korea are classified. This system is well suited for the classification of the most of soils. But paddy field soils have some difficulties in classification because Soil Taxonomy states no proposals have yet been developed for classifying artificially irrigated soils. This paper discusses some problems in the application of Taxonomy and suggestes the classification of paddy field soils in Korea. Following is the summary of the paper. 1. Anthro aquic, Aquic Udipsamments : The top soils of these soils are saturated with irrigated water at some time of year and have mottles of low chroma(2 or less) more than 50cm of the soil surface. (Ex. Sadu, Geumcheon series) 2. Anthroaquic Udipsamments : These sails are like Anthroaquic, Aquic Udipsamments except for the mottles of low chroma within 50cm of the soil surface. (Ex. Baegsu series) 3. Halic Psammaquents : These soils contain enough salts as distributed in the profile that they interfere with the growth of most crop plants and located on the coastal dunes. The water table fluctuates with the tides. (Ex. Nagcheon series) 4. Anthroaquic, Aquic Udifluvents : They have some mottles that have chroma of 2 or less in more than 50cm of the surface. The upper horizon is saturated with irrigated water at sometime. (Ex. Maryeong series) 5. Anthro aquic Udifluvents : These soils are saturated with irrigated water at some time of year and have mottles of low chroma(2 or less) within 50cm of the surface soils. (Ex. Haenggog series) 6. Fluventic Haplaquepts : These soils have a content of organic carbon that decreases irregularly with depth and do not have an argillic horizon in any part of the pedon. Since ground water occur on the surface or near the surface, they are dominantly gray soils in a thick mineral regolith. (Ex Baeggu, Hagseong series) 7. Fluventic Thapto-Histic Haplaquepts : These soils have a buried organic matter layer and the upper boundary is within 1m of the surface. Other properties are same as Fluventic Haplaquepts. (Ex. Gongdeog, Seotan series) 8. Fluventic Aeric Haplaquepts : These soils have a horizon that has chroma too high for Fluventic Haplaquepts. The higher chroma is thought to indicate either a shorter period of saturation of the whole soils with water or some what deeper ground water than in the Fluventic Haplaquepts. The correlation of color with soil drainage classes is imperfect. (Ex. Mangyeong, Jeonbug series) 9. Fluventic Thapto-Histic Aeric Haplaquepts : These soils are similar to Fluventic Thapto Histic Haplaquepts except for the deeper ground water. (Ex. Bongnam series) 10. Fluventic Aeric Sulfic Haplaquepts : These soils are similar to Fluventic Aeric Haplaquepts except for the yellow mottles and low pH (<4.0) in some part between 50 and 150cm of the surface. (Ex. Deunggu series) 11. Fluventic Sulfaquepts : These soils are extremely acid and toxic to most plant. Their horizons are mostly dark gray and have yellow mottles of iron sulfate with in 50cm of the soil surface. They occur mainly in coastal marshes near the mouth of rivers. (Ex. Bongrim, Haecheog series) 12. Fluventic Aeric Sulfaquepts : They have a horizon that has chroma too high for Fluventic Sulfaquepts. Other properties are same as Fluventic Sulfaquepts. (Ex. Gimhae series) 13. Anthroaquic Fluvaquentic Eutrochrepts : These soils have mottles of low chroma in more than 50cm of the surface due to irrigated water. The base saturation is 60 percent or more in some subhroizon that is between depth of 25 and 75cm below the surface. (Ex. Jangyu, Chilgog series) 14. Anthroaquic Dystric Fluventic Eutrochrepts : These soils are similar to Anthroaquic Fluvaquentic Eutrochrepts except for the low chroma within 50cm of the surface. (Ex. Weolgog, Gyeongsan series) 15. Anthroaquic Fluventic Dystrochrepts : These soils have mottles that have chroma of 2 or less within 50cm of the soil surface due to artificial irrigation. They have lower base saturation (<60 percert) in all subhorizons between depths of 25 and 75cm below the soil surface. (Ex. Gocheon, Bigog series) 16. Anthro aquic Eutrandepts : These soils are similar to Anthroaquic Dystric Fluventic Eutrochrepts except for lower bulk density in the horizon. (Ex. Daejeong series) 17. Anthroaquic Hapludalfs : These soils' have a surface that is saturated with irrigated water at some time and have chroma of 2 or less in the matrix and higher chroma of mottles within 50cm of the surface. (Ex. Hwadong, Yongsu series) 18. Anthro aquic, Aquic Hapludalfs : These soils are similar to Anthro aquic Hapludalfs except for the matrix that has chroma 2 or less and higher chroma of mottles in more than 50cm of the surface. (Ex. Geugrag, Deogpyeong se ries)

• Economic and Environmental Geology
• /
• v.8 no.2
• /
• pp.73-87
• /
• 1975

Regional unconformities have been used as boundaries of major stratigraphic units in Korea. The term "synthem" has already been propsed for formal unconformity-bounded stratigraphic units of maximum magnitude (ISSC, 1974). The unconformity-based classification of the strata in the cratonic area in Korea comprises in ascending order the Kyerim, $Sangw{\check{o}}n$, $Jos{\check{o}}n$, $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems, and the Cenozoic Erathem. The unconformites separating them from each other are either orogenic or epeirogenic (and vertical tectonic). The sub-$Sangw{\check{o}}n$ unconformity is a non-conformity above the basement complex in Korea. The unconformities between the $Sangw{\check{o}}n$, $Jos{\check{o}}n$, and $Py{\check{o}}ngan$ Synthems are disconformities denoting late Precambrian and Paleozoic crustal quiescence in Korea. The unconformities between the $Py{\check{o}}ngan$, Daedong, and $Ky{\check{o}}ngsang$ Synthems are angular unconformities representing Mesozoic orogenies. The bounding unconformities of the $Ky{\check{o}}ngsang$ Synthem involve non-conformable parts overlying the Jurassic and late Cretaceous granitic rocks.