• 제목/요약/키워드: 단독 성능

검색결과 351건 처리시간 0.029초

단독운전 방지를 위한 능동적 주파수 변환 기법의 검출 성능 및 THD 분석 (Detection Performance and THD Analysis of Active Frequency Drift for Anti-Islanding)

  • 조영민;최주엽;송승호;최익;이영권
    • 한국태양에너지학회 논문집
    • /
    • 제35권2호
    • /
    • pp.11-19
    • /
    • 2015
  • Islanding is a phenomenon that EPS(Electric Power System) is continuously energized by PV PCS(Photovoltaic Power Conditioning System) even when EPS is isolated from the grid. Unintentional islanding will result in safety hazard, power quality degradation and many other issues. So, islanding protection of grid-connected PV PCS is a key function for standards compliance. Nowadays, many anti-islanding schemes are researched. But existing anti-islanding schemes used in PV PCS have power quality degradation and non-detection zone issues. This paper analyses not only detection performance of existed anti-islanding schemes using active frequency drift but also THD of PCS output current according to each value disturbance for anti-islanding. In addition, the lowest value of disturbance in each scheme was tabulated under guarantee of anti-islanding condition.

장주기 및 유동성분을 고려한 부유식방파제의 방파성능 개선 (Functional Improvement of Floating Breakwaters with Long Wave Kinetics)

  • 윤재선;조용식
    • 한국방재학회 논문집
    • /
    • 제11권1호
    • /
    • pp.93-99
    • /
    • 2011
  • 본 연구에서는 단독형 및 2열형(multi-arranged (2 pieces)), 3열형(multi-arranged) 부유식방파제에서의 구조물간 거리와 흘수, 형상을 변화시키고 파의 주기와 파형경사를 변화시키며, 다양한 변수변화에 따른 영향을 분석하였다. 부유식방파제의 흘수변화는 전달계수에 직접적인 영향을 주며, 비교적 장주기에 해당하는 조파조건에선 단독형과 2열형 부유식방파제보다 3열형 구조에서 높은 방파효율을 나타내었다. 수리모형실험의 결과 검증을 위하여 수치모형과 동일한 조건하에 실험을 하고 LDV시스템을 이용하여 각 부유식방파제에서의 유동장을 측정하였으며, 수리모형실험을 통하여 그에 따른 전달계수을 분석하였다.

노후 단독주택의 난방에너지 효율 개선을 위한 대안 선정 방법에 관한 연구 (Alternative Selection Method for Energy Efficiency Improvement of Old Detached House)

  • 황석호
    • 한국태양에너지학회 논문집
    • /
    • 제39권2호
    • /
    • pp.45-55
    • /
    • 2019
  • More than 76% of the detached houses in Korea are over 20 years old. These old detached houses have poor energy efficiency. According to the 2017 Housing Census (Statistics Korea), more than 50% of low-income families live in detached houses. Therefore, the improvement of energy efficiency in old detached houses is needed from the viewpoint of energy welfare. The general method of building energy modelling for the verification of energy efficiency is based on the construction year data of "Building Design Criteria for Energy Saving" due to the cost and time involved in collecting the thermal performance data of buildings. There is poor accuracy with the deterioration of long-term aging of building materials. Also, the selection of alternatives for energy performance improvement is based on the items to be applied, not a performance improvement goal. It is difficult to calculate energy performance that reflects variations in various parameters with dynamic energy simulations. In this study, the influence of long-term aging is used to accurately predict the energy performance of old detached houses. The building energy modelling method is called ENERGY#, which is a static analysis method based on ISO13790. Energy performance is evaluated by a combination of input variables including building orientation, insulation of walls and roof, thermal performance of windows and window/wall ratio, and infiltration rate. Finally, this study provides a way to determine alternatives that meet energy performance improvement goals.

유한 상태 기계를 이용한 자율무인기뢰처리기의 다중센서융합기반 수중유도항법시스템 설계 (Multi-sensor Fusion Based Guidance and Navigation System Design of Autonomous Mine Disposal System Using Finite State Machine)

  • 김기훈;최현택;이종무
    • 전자공학회논문지SC
    • /
    • 제47권6호
    • /
    • pp.33-42
    • /
    • 2010
  • 본 연구에서는 실해역에서 해류를 고려한 실용적인 유도 시스템을 제안하고 있다. 본 논문에서는 생성된 경로의 최적성은 주요 이슈가 아니다. 시작점부터 목표점까지의 경로는 주요 해류의 방향축을 고려하여 운용 경험이 많은 전문가의 경유점 선택을 통하여 생성된다. 본 논문에서는 또한 초단기선, GPS, 도플러 속도계 그리고 자세센서 등의 계측치를 통해서 다중센서융합알고리즘을 이용하여 정밀 수중항법 솔루션 구현에 대하여 설명하고 있다. 정밀하고 정확하고 갱신 주기가 빠른 수중항법 솔루션을 구현하기 위하여 세 가지 전략을 사용하였다. 첫째는 추측항법의 단독 성능을 향상시키기 위하여 선수각 정밀 정렬을 수행하였다. 둘째는 기본이 되는 단독추측항법이 적분 알고리즘에 기반을 두었기 때문에 시간의 추이에 따른 누적오차의 증가 특성을 가지고 있는데 이를 막기 위하여 주기적으로 절대 위치 정보를 다중센서융합 기법을 이용하여 융합하여 주는 것이다. 셋째는 융합알고리즘의 품질 향상을 위하여 효율적인 특이점 제거 알고리즘을 도입하는 것이다. 개발된 정밀수중항법알고리즘의 성능을 검증하기 위하여 자율기뢰처리기와 심해무인잠수정의 실해역 데이터를 사용하였다.

전체 경로 제한 조건을 갖는 HMM을 이용한 단독음 인식 (HMM with Global Path constraint in Viterbi Decoding for Insolated Word Recognition)

  • 김원구;안동순;윤대희
    • The Journal of the Acoustical Society of Korea
    • /
    • 제13권1E호
    • /
    • pp.11-19
    • /
    • 1994
  • 상태 지속 밀도를 사용하는 hidden Markov Models(HMM/SD)은 음성 신호의 시간적인 변화를 보다 명확하게 나타낼 수 있다 그러나 상태 지속 밀도가 완만하거나 제한된 상태가 길면 이러한 장점은 감소된다. 이러한 문제점을 해결하기 위하여, 본 논문에서는 상태간의 천이가 특정한 시간 구간에서만 발생하도록 하는 전에 경로 제한 조건을 갖는 HMM/GPC를 제한한다. HMM/GPC는 상태 지속을 제한하고 음성 신호의 시간적 변화를 단순하고 효과적으로 표현할 수 있다. 또한 HMM/SD와 HMM/GPC를 결합한 새로운 형태의 HMM/SD+GPC를 제안하고 성능을 비교하였다. HMM/GPC는 기존 Viterbi 알고리즘을 약간 수정하여 구현될 수 있다. HMM/GPC와 HMM/SD+GPC는 기존 HMM과 HMM/SD에 비하여 우수한 성능을 보일 뿐만아니라 계산량도 매우 작다. 화자도립 단독음 인식 실험에서, HMM/GPC(1.6%)의 최소 오차는 기존 HMM보다 1.1% 낮았고 계산량도 57% 감소하였다.

  • PDF

광촉매를 병합한 플라즈마 공정을 이용한 폐수에 함유된 살충제 분해 (Degradation of Pesticides in Wastewater Using Plasma Process Coupled with Photocatalyst)

  • 장두일;김길성;현영진
    • 공업화학
    • /
    • 제24권1호
    • /
    • pp.87-92
    • /
    • 2013
  • 광촉매 혼성 저온 플라즈마는 폐수에 함유된 유기물을 분해시키는 효과적인 기술이다. 본 연구에서는 광촉매가 결합된 특별히 설계된 유전체 방전 시스템을 골프장이나 감귤농가에서 흔히 살포되는 디크로보스, 카보퓨란 및 메치다치온 살충제의 분해에 적용하였다. 단독 및 병합 시스템에서 살충제의 분해를 평가하였다. 단독 시스템은 UV의 차폐 유무 및 산소기체와 공기에 의한 오존(각종 반응 활성종들 포함) 플라즈마를 이용하였다. 혼성 시스템은 UV로 활성화된 산화아연, 이산화티타늄과 그래파이트 옥사이드와 결합하여 공기에 의한 플라즈마 반응에 적용하였다. 그래파이트 옥사이드는 모사 허머스 법으로 제조하여 FT-IR 분광기로 성능을 측정하였다. 반응시간 60 min에서 UV를 차폐하고 공기를 이용한 플라즈마 반응에 의한 분해성능과 비교하였으며, UV로 활성화된 그래파이트 옥사이드(0.01 g/L)와 결합된 플라즈마 반응은 디크로보스와 카보퓨란의 각각 100% 분해도를 보였다. UV를 활용한 광촉매 혼성 플라즈마는 살충제를 분해시키는 효과적인 대안으로 입증되었다.

쌍축 추진 선박의 단독 타 고장 상태에서의 조종성능에 대한 수치적 연구 (A Numerical Study on the Maneuverability of a Twin-screw Ship under Single Rudder Failure)

  • 유영준;김현준
    • 대한조선학회논문집
    • /
    • 제54권2호
    • /
    • pp.161-169
    • /
    • 2017
  • Recently, ship owners have been requiring the assessment of the maneuverability of twin-screw ships under mechanical failures. Because this kind of assessment has not yet been conducted, it is necessary to study the types of machinery failures that can significantly affect the maneuverability of a ship, and to construct a procedure to simulate the maneuvering behavior under such failures. In this paper, the sole focus is the steering system failure from among the variety of failure types, and the maneuvering behavior of the ship under the single rudder failure is simulated for an investigation of the unique characteristics. First, the mathematical model for the twin-screw container ship is verified by comparing the simulated results for the $35^{\circ}$ turning test, $10^{\circ}/10^{\circ}$ zigzag test, and $20^{\circ}/20^{\circ}$ zigzag test under the normal operating condition with those obtained from free running model tests. After the IMO maneuvering tests are additionally simulated under the single rudder failure, the results are reviewed to investigate the maneuvering characteristics that are due to the failure. Further, the $35^{\circ}/35^{\circ}$ zigzag test and the $35^{\circ}$ turning test are simulated to additionally investigate the effects of the single rudder failure on the steering and turning abilities.

나프탈렌술폰산축합물과 폴리카르본산계 혼화제가 첨가된 시멘트 페이스트의 유동성 유지에 관한 연구 (A Study on the Fluidity Retention of Cement Paste Added by Naphthalene Sulfonated Condensate and Polycarboxylic Acid Admixture)

  • 노재성;홍성수;김도수
    • 콘크리트학회지
    • /
    • 제7권5호
    • /
    • pp.189-199
    • /
    • 1995
  • 나프탈렌술폰산 축합물( NSF) 은 시멘트 콘크리트용 고유동화제로 널리 사용되어 왔으나 경시에 따른 슬럼프 손실이 크다는 단점을 가지고 있다. NSF의 단독사용에 따른 이러한 단점을 보완하고자 유동성 유지의 서방성 기능을 지닌 무수말레인산-아크릴산의 폴리카르본산계 공중합체( MA)를 합성하였다. 합성한 MA를 NSF와 일정비율로 혼합하고 시멘트 페이스트에 적용하여 유동성 및 경시에 다른 유동성 유지성능과 유변학적 거동, 재령별 몰탈의 압축강도를 측정하여 물성에 미치는 영향을 살펴보았다. NSF에 MA를 각각 10,20 wt%씩 첨가한 NM-2가 우수한 유동성 및 유지성능을 보였으며, 유변학적 특성에서도 경과시간에 따른 전단응력 및 점도의 증가현상이 NSF단독 첨가에 비하여 지연됨으로써 시멘트 페이스트의 급격한 슬럼프 손실이 억제됨을 보여주었다. 또한 이러한 특성들은 혼화제의 투입량 및 물-시멘트비( W/C) 의 증감에 의해서도 영향을 받고 있다.

창호의 성능 및 건물의 창면적비에 따른 기존 단독주택의 창호 리모델링 방안 연구 (Optimum Method of Windows Remodeling of Existing Residential according to the Window Properties and Window Wall Ratio)

  • 이나은;안병립;정학근;김종훈;장철용
    • KIEAE Journal
    • /
    • 제13권3호
    • /
    • pp.71-78
    • /
    • 2013
  • A need for building energy efficiency is on the issue since energy demand in the building stock in Korea represents about 24% of the final energy consumption. As a way of improving the thermal performance of buildings for reducing maintenance costs and environmental conservation, a lot of effort is shown to improve the building energy efficiency by applying improvement of envelope insulation performance for buildings whose energy efficiency is low relatively through the remodeling. The windows of building envelopes are areas that lead to the biggest heat loss in the building. So windows are considered to be the primary target of energy efficiency in remodeling and various studies for windows have been done. Currently, however, only U-factor and airtightness of windows performance are regulated. Window wall ratio(WWR) and solar heat gain coefficient(SHGC) of windows are not considered when conducting the remodeling. In this study appropriate performance of windows(U-factor and SHGC) for existing residential is proposed according to the window wall ratio by using EnergyPlus. As the results of this study, the U-factor of windows representing the maximum energy savings is $1.0W/m^2K$ but in case of SHGC, the values that indicate the maximum energy savings are different depending on the window wall ratio. Therefore, when conducting the remodeling of windows, to determine energy efficiency by considering only the U-factor is inadequate so it is necessary that appropriate windows are applied to buildings by considering window wall ratio and windows properties(U-factor and SHGC).

경사면의 안정성 모니터링 데이터의 품질관리를 위한 2 단계 접근방안 (Two-Phase Approach for Data Quality Management for Slope Stability Monitoring)

  • 최준혁;김용진;조준휘;정우철;석송희;최송;김용성;지봉준
    • 한국지반신소재학회논문집
    • /
    • 제22권1호
    • /
    • pp.67-74
    • /
    • 2023
  • 경사면의 안정성을 모니터링 하기 위해 데이터 기반으로 사면의 붕괴를 예측, 경보를 하려는 연구가 증가하고 있다. 하지만 대부분의 논문에서는 데이터의 품질에 대해 간과하고 있다. 이는 오경보와 같은 문제를 발생시킬 수 있다. 이에 본 논문에서는 사면에서 수집된 데이터의 품질관리를 위한 규칙과 기계학습 모델로 구성된 2 단계의 접근 방안을 제안하였다. 규칙 기반은 높은 정확도와 직관적인 해석이 가능하다는 장점이 있으며 기계학습 모델은 명시적으로 표현할 수 없는 패턴을 도출할 수 있다는 장점이 있으며 2단계의 접근 방안은 이 두 장점을 모두 취할 수 있었다. 사례연구를 통해 두 방법을 단독으로 사용하였을 경우와 2단계의 접근 방안을 사용하였을 때의 성능을 비교하였고 2단계 접근 방안이 높은 성능을 보이는 것으로 판단되었다. 따라서 데이터의 품질관리를 위해 단독으로 두 방법을 사용하는 것보다 2단계 접근 방안 방법을 사용하는 것이 적절할것으로 판단된다.