• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.120-130
• /
• 1993

Generally, the machinability of materials that have a good mechanical properties is poor. For materials having a high strength, high toughness, high strength in high temperature and wear resistance, it is difficult to remove a chip from work materials. These properties are well shown in a Nickel, so this metal is used in machine materials, semi-conductor industry, metal mold and optical fields etc. But it is limitted in use because of high cost and poor machinability. In this study, the cutting of pure Nickel was conducted to examine wear of CBN, poly crystal diamond (PCD) and single crystal diamond (SCD) tools. From the result, the CBN tool is superior to poly crystal diamond tools or single crystal diamond tools in terms of tool wear and tool wear is predictable from experimental data base.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.62-62
• /
• 2003

• Journal of the KSME
• /
• v.30 no.4
• /
• pp.367-373
• /
• 1990

초정밀 절삭용 다이아몬드 공구의 날끝 형상에 관해서는 여러 가지 설계안이 개발되어 제각기 성공적으로 사용되고 있지만 제품 품질의 균일성, 즉 성능과 수명의 차이는 아직까지 미해결이다. 또한, 초정밀공구의 날끝 능선에 관해서 최근 측정 데이터가 발표되고 있으나, 양호한 날끝능선, 불량한 능선 및 소정의 다듬질이 이루어지지 못하고 수명에 달해버린 능선 등에 대한 제각기의 형상, 구조 등이 밝혀지지 않고 있으며, 공구의 제작법을 개발하는 것은 금후의 연구과제로 남 아있다. 그리고, 단결정 바이트의 연마에 대해서는 많은 기술적인 진전이 이루어져 왔으나, 수 명의 차이는 해결하지 못하고 있다. 이는 날끝능선의 연마방향과 더불어 다이아몬드의 이방성, 원석의 품질 등과 관련이 있다고 볼 수 있다. 공구의 마멸과정이 결정방위에 의존하는 것은 당연하겠지만, 공구의 연마가공에서는 이방성 그 자체가 공구마멸에 나타나는 문제 및 경사면과 여유면의 마멸과 달리 예리한 인선을 둔화시키는 날끝 능선의 마멸은 어떻게 진행되는가가 문 제이며, 공구의 결정방위와 성능, 수명과의 관련은 실험적으로 해명되어야 할 것이다. 또한 재 료인 다이아몬드 원석에 있어서도, 커다란 결함이 발견된 것은 제외되지만 극히 경미한 결함은 어디까지 허용될 것인지가 문제이다. 내부응력, 착색 등 결함의 인자는 다양하지만 제각기 공구 의 성능 및 수명과의 관련은 명확하게 밝혀져 있지 않다. 이러한 인자 중에서도 어느 것이 가장 크게 영향을 미치는지 확인된다면 커다란 진보가 이루어질 것으로 기대된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.203-204
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.765-766
• /
• 2011

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.7
• /
• pp.621-628
• /
• 2009

Nickel-phosphorus alloys are attractive materials for diamond turning applications such as fabrication of large optics and other high precision parts. It is also well-known that the higher phosphorus content of the alloys minimizes the diamond tool wear. Due to the weakness of electoless nickel plating that the phosphorus contents is limited to 13-14% (wgt), increased attention has been paid at electro-nickel plating which enables the alloys with 15-16% phosphorus. In this study, experiments were carried out to observe the wear characteristic of single crystal diamond tools in micro-grooving of electro-nickel plated drums. The experiments shows that long distance (50km) machining of micro-grooving on electro-nickel plated drum is possible with a single crystal diamond tool without any significant tool wear and defective machined surface.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1216-1224
• /
• 1996

In the use of glass fiber reinforced plastics it is often necessary to cutting the components, but the cutting GFRP is often made difficult by the delamination of composites and the short tool life. In this paper, the machinability of GFRP by mean of tool materials and type was experimentally investigated. By proper selection of cutting tool material and type excellent machining of this workpiece is achieved. The surface quality relate closely with the feed rate and cutting tools.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.127-133
• /
• 1998

This research intends to gain the sight for the qualitative characteristics of precision cutting by using the CNC lathe with a mono-crystal diamond(MCD) and a poly-crystal diamond(PCD) tool on the cutting distance. In case of an MCD tool, as the cutting distance increases, the surface roughness becomes worse and the standard deviation of surface roughness is small. In case of a PCD tool, as the cutting distance increases, the surface roughness becomes stable with a large standard deviation. The cutting force ratio(Ft/Fn) decreases as the nose radius increases and the decreasing ratio becomes larger for small nose radius.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.3
• /
• pp.207-213
• /
• 2014

A study was carried out to fabricate the cutting tool geometry with micro/nanoscale on the single crystal diamond tool by using the FIB. The FIB technique is an ideal tool for TEM sample preparation that allows for the fabrication of electron-transparent foils. The FIB is appropriate techniques to sample and subsequently define the chemical composition and the structural state of mineral inclusion on the micro/nanoscale. The combination of FIB with a SEM allows for 3D information to be obtained from samples including 3D imaging. Cutting strategies were demonstrated to improve the performance of cutting tool geometry and to generate high aspect ratio micro cutting tool. A finely focused beam of 30keV Ga+ ions was used to mill cutting tool shapes for various micro patterns. Therefore FIB sputtering is used to shape a variety of cutting tools with dimensions in the $1-5{\mu}m$ range and cutting edge radii of curvature of under 50nm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.5
• /
• pp.64-69
• /
• 2014

This article presents machining experiments to assess the relationship between the profile accuracy and the workpiece hardness using a natural diamond tool on an ultra-precision diamond turning machine. The study is intended to secure a corner cube prism pattern for reflective film capable of high-quality outcomes. The optical performance levels and edge images of corner cubes having various hardness levels of the copper-coated layer on a carbon steel plate are analyzed. The hardness of the workpiece has a considerable effect on the profile accuracy. The higher the hardness of the workpiece, the better the profile accuracy and the worse the edge wear of the diamond tool.