• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.3
• /
• pp.17-24
• /
• 1997

Broad-band RAM's (Radar absorbing materials) are designed by multi-layered lossy dielectrics. The depth, the relative permittivity and the loss tangent of each layer are optimized in order to meet the required reflective power over the specified frequency range using a genetic algorithm. The reflection coefficients are calculated by the continued fraction method. A new population model of the partial initialization method during iterations is applied for the multi-modal functions to enhance the performance of the genetic algorithm. The optimal RAN's are designed by setting the relative permittivity and the loss tangent of the dielectrics as a funtion of the frequency over 5~20GHz.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.53-58
• /
• 2018

Since the scaling-down of IC devices has been reached to their physical limitations, several innovative packaging technologies such as 3D packaging, embedded packaging, and fan-out wafer level packaging (FOWLP) are actively studied. In this study the fabrication of organic-inorganic dielectric material was evaluated for the use of multi-structured redistribution layers (RDL) in FOWLP. Compared to current organic dielectrics such as PI or PBO an organic-inorganic hybrid dielectric called polysilsesquioxane (PSSQ) can improve mechanical, thermal, and electrical stabilities. polysilsesquioxane has also an excellent advantage of simultaneous curing and patterning through UV exposure. The polysilsesquioxane samples were fabricated by spin-coating on 6-inch Si wafer followed by pre-baking and UV exposure. With the 10 minutes of UV exposure polysilsesquioxane was fully cured and showed $2{\mu}m$ line-pattern formation. And the dielectric constant of cured polysilsesquioxane dielectrics was ranged from 2.0 to 2.4. It has been demonstrated that polysilsesquioxane dielectric can be patterned and cured by UV exposure alone without a high temperature curing process.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.53-53
• /
• 2003

최근 높은 유전상수와 잔류 분극, 비선형 등의 다양한 유전적인 특성으로 인해 산화물 박막이 많은 관심을 가지고 연구되어지고 있다. 많은 산화물 박막중에서도 BaTiO3/SiTiO3 (BTO/STO) 인 공격자는 STO나 BTO 또는 (Ba$_{0.5}$ Sr$_{0.5}$)TiO$_3$ (BST)등의 고용체들과 비교했을 때 아주 뛰어난 유전적인 성질을 나타내고 있다. 특히 1000 $\AA$ 이하의 낮은 두께에서도 높은 유전상수와 비선형도를 가진다는 사실이 선행된 실험에서 밝혀졌는데 BTO와 STO를 각각 2 unit cell (8 $\AA$)로 고정 시킨 후 다층 박막으로 제작했을 때 가장 큰 유전 특성을 얻을 수 있었다. 이런 뛰어난 유전적인 성질은 BTO와 STO 각 층의 두께와 주기 변화에 따른 박막 내부의 인위적인 stress와 그에 따른 격자 변형과 아주 밀접한 관계가 있음으로 생각되어진다. 따라서 이런 두 계면에서의 stress와 격자 변형을 더욱 정착하게 분석하기 위해서는 각 층을 원자 단위로 정확하게 두께 제어를 하고 증착되어지는 과정중에서의 growth mode를 확인하는 것이 무엇보다 중요한 일이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.24-32
• /
• 2005

The object of this study is to design radar absorbing structures(RAS) with load-bearing ability in X-band. Glass/Epoxy plain-weave composites of excellent specific stiffness and strength, containing multi-walled carbon nanotubes(MWNT) added to induce dielectric loss were fabricated. The observation of microstructure and the permittivity of the composites confirmed that the materials are suitable to be used for radar absorbing material. Genetic algorithm and theory for reflection/transmission of electromagnetic waves in a multi-layered RAS were applied to conduct an optimal design of a RAS composed of the developed composites. We observed that the thickness per ply changes with the number of ply and MWNT contents. The fabrication process was proposed considering the problem and applied to fabricate a designed RAS and the theoretical and measured reflection loss of the RAS were also found in good agreement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.730-739
• /
• 2015

In this paper, a wideband circular polarizer operating in the frequency range of 6~18 GHz is designed and fabricated using a multilayer structure with meanderlines. A T matrix expression for the unit structure, which consists of meanderline, dielectric substrate and spacer, was derived using the boundary value solution. A proposed meanderline structure was modeled as an array of unit meanderline cell in order to apply the waveguide model with PEC and PMC boundary conditions. The calculation procedures to obtain an equivalent susceptance of the unit meanderline cell using HFSS was also suggested. Using a hybrid method, which combines the T matrix with the HFSS results, and cut-and-try method, a wideband circular polarizer with low insertion loss and good AR performance was designed. The fabricated polarizer has the return loss less than -10 dB within 92 % bandwidth, the average insertion loss less than -0.24 dB, and the average AR below 2.6 dB for full 3:1 bandwidth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.3
• /
• pp.395-400
• /
• 2021

In this paper, the wideband patch antenna is simulated and manufactured for the wireless LAN of 5GHz band that is defined in IEEE 802.11a. In the 802.11a, 200 channels of 675MHz are defined. Therefore, the bandwidth is needed more than 12.3%. For the wideband characteristics, low dielectric constant is realized with the multi-layer of 2 teflon substrates and the air dielectric layer and the feeding method of the coupled-line is used. Optimized wideband patch antenna is simulated with the return loss of 38.99dB at the center frequency of 5.43GHz and the bandwidth of 12.9%. The gain of manufactured patch antenna is 4.38, 4.52, and 5.12dBi at the channel number of 46, 56, and 153, respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.57-61
• /
• 1992

In this paper, the shielding characteristics of a cylindrical multilayered dielectric are analyzed. In order to evaluate shielding effects, we consider the case that plane waves are incident upon an infinitely long cylindrical multilayered dielectric which surrounds a conductor core. For perfect and lossy dielectric distributions, total induced currents at the conductor surface are computed. It was found from those results that electromagnetic characteristics of the multilayered dielectric are largely dependent on dielectric distribution.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.7
• /
• pp.26-31
• /
• 1993

We have analyzed shielding characteristics of the spherical multilayered dielectric, with the assumption that the inner part of the model is filled with the perfect conductor whose radius is varied from 0.2.lambda. to 1.0.lambda. and the outer part of the conducting sphere is covered by a lossy multilayered dielectric. Variation of shielding effects have been examined as the function of parameter of the dielectric layer and the radius of the conducting sphere.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.4
• /
• pp.401-406
• /
• 2002

A microstrip circuit with multilayer structure is applied variously in the MMIC. For effective transmission between microstrip lines with different dielectric height, it is need to analyze and to induce accurately the equivalent circuit in 3 dimensional stepped discontinuous microstrip line. In this paper, by using the S parameters obtained by FDTD numerical method and measurement, T equivalent circuit and its element values were induced. And the analyzed and measured results showed good agreement in 1 ∼5 ㎓ range.

• Journal of the Korean Ceramic Society
• /
• v.31 no.9
• /
• pp.981-988
• /
• 1994

Crystallizable glasses with precipitation of celsian were prepared for the purpose of insulating dielectric layers for the devices such as integrated circuit substrates. Crystallization behavior of these glasses were studied by DTA, SEM, XRD analysis and by the measurement of dielectric properties. The base composition of the glass-ceramic consists in weight percent of 30% SiO2, 10% Al2O3, 26% BaO, 10% CaO, 10% ZnO, 8%TiO2 and 6% B2O3. 2-6 wt% Y2O3 were selected as the nucleating agent to promote monoclinic celsian formation. As a result, in barium-rich glasses containing 4~6wt% Y2O3 , monoclinic celsian was developed as major crystalline phase in the temperature range of 850~90$0^{\circ}C$. Also, the dielectric constant and quality factor of these glass-ceramics were about 9 and more than 1000, respectively.