• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.99-105
• /
• 2011

Typically, quick and easily deployed communication for a clear disaster management is required in a disaster situation. But it is not easy because lack of backbone network and poor conditions of disaster site. it is possible to obtain a wide service coverage and low power with portable wireless mesh network technology. In this paper, we developed portable wireless mesh network gateway with a network processor and evaluate it's performance including throughput, latency delay, packet loss, etc. The experiments show our wireless mesh network gateway has basic performance and can be used in various environments like disaster site.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.240-244
• /
• 2008

This paper presents an EMG-based wireless and wearable computer interface. The wearable device contains 4 channel EMG sensors and is able to acquire EMG signals using signal processing. Obtained signals are transmitted to a host computer through wireless communication. EMG signals induced by the volitional movements are acquired from four sites in the lower limb to extract a user's intention and six classes of wrist movements are discriminated by employing an artificial neural network (ANN). This interface could provide an aid to the limb disabled to directly access to computers and network environments without conventional computer interface such as a keyboard and a mouse.

• Journal of the Korean Magnetics Society
• /
• v.21 no.3
• /
• pp.99-103
• /
• 2011

In this study, we have performed systematical FEM analysis for design of open-ended 3-layer magnetic shield. For the simulation to calculated shielding factors, the relative permeability was varied in the range of $2{\times}10^3\sim1{\times}10^5$, and the length of the magnetic cylinders and length difference between layers were changed. We found that the shielding factor of -60 dB were obtained with the relative permeability of over 20000 and the lengths of magnetic layers of 40 cm, 45 cm and 50 cm, and the uniform magnetic field could be obtained in the range of $10cm{\times}10cm-\phi$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.1
• /
• pp.70-77
• /
• 1999

A miniaturized voltage controlled oscillator using multi-layer ceramic technology at PCS frequency band is designed and fabricated. To improve the phase noise characteristics and to reduce the size, the strip line which is embedded in a high performance multi-layer ceramic substrate is used as an inductor of VCO. And the fabricated VCO is very small size ($6mm\times6mm\times2mm$). At the bias condition of 3.3 V and 9mA, the output power and phase noise in the operating frequency range of 1,720~1,780 MHz are -3.7 dBm and -95 dBc/Hz at 10 KHz offset from the carrier, respectively. The phase noise and size are better than the conventional VCO using glass epoxy substrate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1315-1320
• /
• 2012

In this study, piezoelectric AC-DC converter using ring-dot type multilayer piezoelectric transformer with no anisotropic of polarization was developed. Considering the characteristics of piezoelectric transformer which is very narrow operating frequency range, piezoelectric converter was designed with mixed structure of PFM driving method for feedback control of oscillation frequency and PWM driving method for output control. Maximum power and allowed current of the developed piezoelectric converter showing stable driving with minimum heat was 25W and 900mA, respectively. The output voltage of the piezoelectric converter was controlled by the driving oscillation frequency and showed stable and efficient operating characteristics at the maximum power.

• Journal of Korea Multimedia Society
• /
• v.6 no.2
• /
• pp.325-331
• /
• 2003

In this paper, we designed a spiral inductor and voltage controlled oscillator with the negative resistor for the bluetooth receiver by using 0.25$\mu\textrm{m}$ 1-poly 5-metal CMOS n-well process. The proposed inductor, which applies multi layer metal structure, is a structure that decreases resistance value by increasing he metal thickness. As the resistance value decreases, the quality factor Q has improved. Also, voltage-controlled oscillator is designed applying 1 port negative resistance, and changes its oscillating frequency by varying outside capacitor values. The simulation results show that oscillating frequency is 2.33~2.58GHz changing from 2pF to 14pF, and the oscillator has oscillating power over 0dBm.

• Journal of the Economic Geographical Society of Korea
• /
• v.13 no.2
• /
• pp.196-218
• /
• 2010

This study is to investigate the development process and the structure of the machine and material industrial clusters in Yeongnam region, Korea. In theoretical analysis, it is proposed that the wide area industrial cluster has three type of development process and a duplicate (or multi-level) spatial structure. We can ascertain from the case study of industrial clusters in Yeongnam region that An wide machine and material industrial cluster has been formed in Yeongnam region and the cluster has the duplicate structure or multi-level structure.

• Korean Journal of Plant Resources
• /
• v.28 no.5
• /
• pp.665-674
• /
• 2015

The final goal of this research is to develop a botanical biofiltration system, which combines green interior, biofiltering, and automatic irrigation, which can purify indoor air pollutants according to indoor space and the size of biofilter. The biofilter used in this experiment was designed as an integral form of water metering pump, water tank, blower, humidifier, and multi-level planting space in order to be more suitable for indoor space utilization. This study was performed to compare indoor air quality between the space adjacent to a botanical biofilter and the space away from the biofilter (control) without generation of artificial indoor air pollutants, and to evaluate plant growth depending on multiple floors within the biofilter. Each concentration of indoor air pollutants such as TVOCs, monoxide, and dioxide in the space treated with the biofilter was lower than that of control. Dracaena sanderiana ‘Vitoria’ and Epipremnum aureum ‘N Joy’ also showed normal growth responses regardless of multiple floors within the biofilter. Hence, it was confirmed that the wall-typed botanical biofilter suitable for indoor plants was effective for indoor air purification.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.530-537
• /
• 2015

Photovoltaic (PV) modules are environmentally energy conversion devices to generate electricity via photovoltaic effect of semiconductors from solar energy. One of key elements in PV modules is "Backsheet," a multilayered barrier film, which determines their lifetime and energy conversion efficiency. The representative Backsheet is composed of chemically resistant poly(vinyl fluoride) (PVF) and cheap poly(ethylene terephthalate) (PET) films used as core and skin materials, respectively. PVF film is too expensive to satisfy the market requirements to Backsheet materials with production cost as low as possible. The promising alternatives to PVF-based Backsheet are hydrocarbon Backsheets employing semi-crystalline PET films instead of PVF film. It is, however, necessary to provide improved barrier property to water vapor to the PET films, since PET films are suffering from hydrolytic decomposition. In this study, a polyurethane adhesive with reduced water vapor permeation behavior is developed via a homogeneous distribution of hydrophobic silica nanoparticles. The modified adhesive is expected to retard the hydrolysis of PET films located in the core and inner skin. To clarify the efficacy of the proposed concept, the mechanical properties and electrochemical PV performances of the Backsheet are compared with those of a Backsheet employing the polyurethane adhesive without the silica nanoparticles, after the exposure under standard temperature and humidity conditions.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.71-87
• /
• 2007

In this study, 14 heavy snow events in Yeongdong area which are local phenomena are analyzed using MODIS cloud products provided from NASA/GSFC. The clouds of Yeongdong area at observed at specific time by MODIS are classified into A, B, C Types, based on the characteristic of cloud properties: cloud top temperature, cloud optical thickness, Effective Particle Radius, and Cloud Particle Phase. The analysis of relations between cloud properties and precipitation amount for each cloud type show that there are statistically significant correlations between Cloud Optical Thickness and precipitation amount for both A and B type and also significant correlation is found between Cloud Top Temperature and precipitation amount for A type. However, for C type there is not any significant correlations between cloud properties and precipitation amount. A-type clouds are mainly lower stratus clouds with small-size droplet, which may be formed under the low level cold advection derived synoptically in the East sea. B-type clouds are developed cumuliform clouds, which are closely related to the low pressure center developing over the East sea. On the other hand, C-type clouds are likely multi-layer clouds, which make satellite observation difficult due to covering of high clouds over low level clouds directly related with Yeongdong heavy snow. It is, therefore, concluded that MODIS cloud products may be useful except the multi-layer clouds for understanding the mechanism of heavy snow and estimating the precipitation amount from satellite data in the case of Yeongdong heavy snow.