• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.128-135
• /
• 2004

This paper proposes a phase measurement algorithm which is based on the recursive implementation of sliding-DFT. The algorithm is designed to have a robust behavior against the erroneous factors of frequency drift, additive noise, and twiddle factor approximation. The size of phase error caused by the finite wordlength implementation of DFT twiddle factors is shown significantly lower than that of magnitude error. The drastic reduction of the phase error is achieved by the exploitation of the quadruplet symmetry characteristics of the approximated twiddle factors in the complex plane. Four channel power-line phase measurement system is also designed and implemented based on the time-multiplexed sharing architecture of the proposed algorithm. The operation of the developed system is also verified by the experiment performed under the test environment implemented with the multi-channel function generator and the on-line interfaced host processor system. The proposed algorithm's features of phase measurement accuracy and its robustness against the finite wordlength effects can provide a significant impact especially for the ASIC or microprocessor based embedded system applications where the enhanced processing speed and implementation simplicity are crucial design considerations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.912-918
• /
• 2014

In this paper, a VHF band multi channel phase discriminator for direction finding equipment using tripple baseline interferometer technique is proposed. In order to measure simultaneously phase difference between IF(Intermediate Frequency) signals of the direction finding equipment, phase discriminator was designed to have parallel structure with multi channel, the phase correlator of phase discriminator was designed with I, Q mixer for reducing number of components. And digital LUT(Look Up Table) was applied for compensating error of phase discriminator due to phase unbalance of RF components. The measured phase accuracy of fabricated phase discriminator was 2 degree RMS(Root Mean Square) at 30 dB SNR condition, which is superior to the phase accuracy of conventional product.

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.148-154
• /
• 2005

Since the output of retina for visual stimulus is carried by neurons of very diverse functional properties, it is not adequate to use conventional single electrode for recording the retinal action potential. For this purpose, we used newly developed multichannel recording system for monitoring the simultaneous electrical activities of many neurons in a functioning piece of retina. Retinal action potentials are recorded with an extra-cellular planar array of 60 microelectrodes. In studying the collective activity of the ganglion cell population it is essential to recognize basic functional distinctions between individual neurons. Therefore, it is necessary to detect and to classify the action potential of each ganglion cell out of mixed signal. We programmed M-files with MATLAB for this sorting process. This processing is mandatory for further analysis, e.g. poststimulus time histogram (PSTH), auto-correlogram, and cross-correlogram. We established MATLAB based protocol for waveform classification and verified that this approach was effective as an initial spike sorting method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.3
• /
• pp.326-331
• /
• 2010

This paper presents the design and implementation of a data acquisition system with a large number of multi-channels for manufacturing machine. The system having a throughput of 800-ch analog signals has been designed with Quartus II tool and Cyclone II FPGA. The proposed system is suitable for the large scale data handling in order to distinguish whether the operation is correct or not. The designed system is composed of a control unit, voltage divider and USB interface. To reduce the data throughput, we utilized an algorithm which can extract the same data from the achieved data. The test results of the system adapted to a manufacturing machine, show a relevant data acquisition operation of 800 channels in short time.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.405-412
• /
• 2023

With the development of drone and ICT convergence technology, the use of underwater drones such as leisure underwater drones such as underwater exploration for fishing and industrial drones such as bridge piers is increasing. Existing motor controllers are suitable for aerial drones and these can increase the completeness of underwater drones and their reliability in motor control by developing BLDC motor controllers dedicated to underwater drones. By developing a battery management system (BMS) exclusively for underwater drones, battery stability was ensured by checking the state of charge, checking the state of discharge, adjusting cell balancing, and implementing high/voltage protection functions.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.28-37
• /
• 2010

In this paper, the IC (Integrated Circuit) for multi-channel asynchronous communication was designed by using FPGA and VHDL language. The existing chips for asynchronous communication that has been used commercially are composed of one to two channels. Therefore, when communication system with two channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 asynchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 256 bytes respectively and consequently high speed communication became possible. To detect errors between communications, it was designed with digital filter and check-sum logic and channel MUX logic so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. It was composed and simulated logic of VHDL described by using Cyclone II Series EP2C35F672C8 and QuartusII V8.1 of ALTERA company. In order to show the performance of designed IC, the test was conducted successfully in QuartusII simulation and experiment and the excellency was compared with TL16C550A of TI (Texas Instrument) company and ATmegal28 general-purpose micro controller of ATMEL company that are used widely as chips for asynchronous communication.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.427-431
• /
• 1998

스테레오, MIDI, MP3 등등의 신호를 입력으로 하여 음상의 공간감, 거리감, 방향감, 확산감, 위치감 등이 지각을 느끼게 하는 공간적 현장감 시스템을 제안한다. 본 제안은 2채널로 기록된 매체를 2채널 또는 다채널로 표현이 가능하며 영상과 더불어 두 개의 스피커만으로도 입체 음향을 즐길 수 있다. 음악의 경우는 장르에 따라 각각의 특징을 가지고 있다. 그러한 특징은 위치감과 방향감에 의해 음장의 형태를 구현하고 공간감 거리감을 부과하므로 입체 음장 구현을 도모한다. 그리고 확산감을 부과하므로써 실조화 공간 음장을 구현할 수있다. 본 논문은 특정한 음색을 변화하기 위하여 이퀄라이저를 이용할 필요가 없으며, 다양한 음장 형태를 DSP를 이용 알고리즘화 하여 구현하던 것을 본 RSF는 아날로그 방식으로 구현하므로써 노이즈 측면과 PCB 패턴 부분 고려등을 고려하지 않고도 구현할 수 있다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.444-446
• /
• 2010

본 논문에서는 애니메트로닉스 기본 개념과 캐릭터 안구 메커니즘의 하드웨어 구동원리 및 이를 구현하기위한 다채널 제어기를 소개하였다.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2148-2151
• /
• 2003

In this paper, we present our experiences in designing and implementing a CX23880 based multichannel video/audio capture device. We try to clarify differences between CX2388x family and 878A, the previous version of Cx2388x, and what one needs to be careful about in developing device drivers for CX2388x based video/audio devices. Our work is expected to help one who will need to develop Cx2388x based video/audio device later.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.93-99
• /
• 2003

디지털방송은 다수의 채널 공급을 가능하게 하는데, 이러한 다채널 환경에서는 각 채널로 일일이 전환하지 않고도 어느 채널에 어떤 정보가 방송되고 있는지를 일목요연하게 파악 할 수 있는 전자 프로그램 가이드(EPG : Electronic Program Guide)가 필연적으로 요구된다. 본 논문은 EPG의 한 구현방법으로서 방송을 통해 TV에 전달되어 실행되는 Downloadable EPG를 설명하고 우리나라 디지털 위성방송 표준인 DVB-MHP규약을 따르는 구현방법과 구현결과를 기술하였다. 본 논문은 데이터 방송과 EPG의 구현에 관련된 참고 기술자료가 미비한 현실에서 디지털 방송의 EPG 개발자들이나 응용프로그램(application) 개발자들이 DVB-MHP 규약에 따라 다양한 종류의 EPG를 개발하는데 도움이 될 것이다.