• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.33-40
• /
• 2009

Compacted soil are used in almost roadway construction with compaction of soil. The direct consequence of soil compaction is densification, which in turn results in higher strength, lower compressibility, and lower permeability. The standard and modified Proctor tests are the most common methods. Both of these tests utilize impact compaction, although impact compaction shows no resemblance to any type of field compaction and is ineffective for granular soils. It has been dramatic advances in field compaction equipment. Therefore, the Proctor tests no longer represent the maximum achievable field density. The main objectives of this research are a survey of current field compaction equipment, laboratory investigation of compaction characteristics, and field study of compaction characteristics. The findings from the laboratory and compaction program were used to establish preliminary guidelines for suitable laboratory compaction procedures.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.3
• /
• pp.59-67
• /
• 2007

For the time being, HMA test specimen were prepared by Marshall Compaction Method for hot mix asphalt design and evaluated the mechanical properties of HMA at the specified air voids. Gyratory Compaction can simulate the field compaction process and measure the degree of compaction just after field compaction in laboratory. Superpave mix design with Gyratory compactor has been used for characterization of performance. The curve of gyratory compaction can be used to evaluate the permanent deformation potential of hot mix asphalt. In this paper, couple of indices for hot mix asphalt have been showed for hot mix asphalt in Korea. The major properties from gyratory compaction curve are compaction energy index and traffic compaction index. The specific guide line for the potential of hot mix asphalt has been proposed.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.43-48
• /
• 2010

Proctor test A or D method of compaction is the most common laboratory test for investigation of subgrade soil characteristics, however, compression type using roller is used in the field. The differences between laboratory and field compaction have considerable error as application to subgrade soil properties of laboratory test. The investigation of compacted soil is carried into effect to solve the problem. The gyratory compactor which is made to reproduce the field density of asphalt mixture, coming from traffic loads, has an advance to compact it similar to arrangement of field aggregate particles. This gyratory compactor has several problems of investigation of compacted soil, because it has designed to make initial asphalt specimens. The main objectives of this research are grasping problems when compacted soil test using the gyratory compactor and showing solutions. It has made a comparative study of difference of the percentage of water content and weight, which are before and after compaction, about the pressure of compaction, frequency of compaction and speed of compaction. And it also has investigated finding maximum percentage of water content which not occur change of percentage of water content after compaction and searching how has an effect on drawing compaction curve.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.227-236
• /
• 2007

The design number of gyration is required in the process of asphalt mix design using gyratory compactor. The purpose of this study is to select the design number of gyration for asphalt mix design in the laboratory. Three types of methods were used to select the design number of gyration. The first method is to select the gyration number which gives the same density with the mixtures compacted with 75 blows of Marshall Compaction. The second method is to select the gyration number which gives the same deformation strength with the mixtures compacted with 75 blows of Marshall Compactor. The third method is to select the gyration number which meet the 4% air voids. Ten mixtures, one type of aggregate(granite), one type of asphalt binder(pen. 60-80), and 10 types of gradation, were prepared for the laboratory tests. As a result, 100 number of gyration was selected for the design number of gyration of the asphalt mix design. This result shows a similar trend with the design number of gyration used in the foreign countries. Thus, the design number of gyration selected in this study can be used for the asphalt mix design using the gyratory compactors.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.2
• /
• pp.64-73
• /
• 1987

효과적인 모래의 다짐 방법으로 진동에 의한 방법이 널리 사용되고 있다. 이 연구의 목적은 모래의 진동 다짐시 영향을 주는 인자의 개별적인 효과를 분석하고 가 인자들이 복합되어 진동다짐에 주는 효과를 분석하는 것이다. 이 연구에서는 진동시간 가속도 과도화중 염수비 시료의 다짐전 밀도등을 변화시켜가며 진동테이블 위에서 제작된 시료를 다짐하였고 시험결과는 상대밀도의 변화애 의하여 분석하였다 진동다짐의 효과는 다짐가속도 진동수 및 모래의 정도에 따라 변하며 과도하중이나 진건은 비교적 적은 영향을 주는 인자였다. 가속도가 1g 보다 큰경우 다짐효과는 진동이 시작되는 초기에 발생하였고 그 후는 면밀하게 진동효과가 나타났다. 효과적인 다짐을 위하여는 최적가속도와 최고 과도하중의 선택이 중요하며 최적치보다 큰경우는 다짐의 효과가 감소한다. 건조된 모래와 포화된 모래 모두 같은 최적가속도에서 최대의 다짐효과를 나타냈다. 각 인자 즉 가속도 진동수 단위 중량 영수비, 균등계수, 유효압경, 과도하중, 및 진동시간등의 효과를 복합하여 진동다짐의 효과를 상대밀도의 변화로 나타낼경우$\Delta$DR=38.0∧0.14 의 관계를 얻었다.

• International Journal of Highway Engineering
• /
• v.3 no.4 s.10
• /
• pp.127-136
• /
• 2001

To increase the structural integrity of concrete box culvert good compaction by the dynamic compaction roller with bi9 capacity is as effective as good backfill materials. It is needed for effective compaction that a compaction roller closes to concrete structure with high frequency. However structural distress of the culvert could be occur due to the excessive earth pressure by great dynamic compaction load. To investigate the characteristics of Induced stress by compaction, a box culvert was constructed with changing cushion materials and compaction methods. Two types of cushion material such as tire rubber chip and EPS(Expanded Polystyrene) were used as cushion panels and they are set on the culverts before backfill construction. Laboratory test result of cushion material says that the value of dynamic elastic modulus of rubber is lesser than that of EPS. On the other hand, material damping of rubber material is greater than that of EPS. In most case, dynamic compaction rollers with 10.5 ton weights were used and vibration frequency was applied 30Hz for the great compaction energy. This paper presents the main results on the characteristics of dynamic earth pressures during compaction. The amounts of induced dynamic pressures$(\Delta\sigma\;h)$ by compaction are affected with construction condition such as compaction frequency, depth of pressure cell, distance between roller and the wall of culvert and roller direction. Based on the measured values dynamic lateral pressure on the culverts, it could be said that orthogonal direction of roller to the length of culvert is more effective to compaction efficiency than parallel direction.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.65-74
• /
• 2018

The degree of compaction of embankments is generally measured using the sand replacement method or a soil density gauge. However, these methods include coarse particles, which are relatively large. The degree of compaction is overestimated if the in-situ soil density is simply compared with the density obtained from a Proctor compaction test (KS F 2312, 2001), because the density of coarse particles is higher than that of soil. However, there is no recommended correction for the coarse particle ratio in Korea, thus intentionally increasing the degree of compaction for structures to which large loads are applied or for which compaction is critical. Here, a correction considering the Korean Proctor compaction test and the difference between the maximum allowable particle sizes was recommended after corrections for coarse particle ratios in other countries were collected and analyzed. The degree of compaction was re-estimated by applying the recommended correction to the results of both Proctor compaction and sand replacement tests. The degree of compaction without the correction of coarse particle ratio was overestimated, because the re-estimated degree of compaction decreased as the coarse particle ratio increased. The relatively accurate results obtained from the field application of the correction will offer long-term cost savings due to reduced maintenance fees during operation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.621-627
• /
• 2017

In this study, GPS (Global Positioning System) is applied to rollers for quality control problems caused by empirical judgment of compaction construction. In addition, database and 3D modeling of location information can eliminate unnecessary compaction or excessive compaction, thereby improving quality and shortening the time. This paper presents a methodology of ICMV (Intelligent Compaction Measurement Values) analysis by designing a intelligent compaction method using an accelerometer. Detailed method of ICMV analysis includes CMV (Compaction Meter Value) analysis which can quickly and conveniently evaluate the compaction of the compacted ground.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.143-151
• /
• 2005

This paper presented a method to estimate the consolidation yield stress of compacted soil with an unsaturated soil mechanics, especially considering the effect of matric suction. Then two kinds of experiments were conducted. One is a series of static compaction tests to monitor the matric suction, and the other is a series of consolidation tests on compacted soil without soaking. The results indicate that it is possible to derive the distribution of matric suction on compaction curves and to hypothesize the changes of the void ratio depending on the matric suction in the consolidation tests. With this experimental results, a new method was introduced to estimate the consolidation yield stress of compacted soil including compaction curves.

• Korean Journal of Agricultural Science
• /
• v.10 no.1
• /
• pp.97-109
• /
• 1983

In this study, the effects on the soil compaction were investigated through the various testing method by changing the number of layers, the number of blows per layer and drop height. The results obtained in this study were summarized as follows. 1. Soil compaction was largely influenced by maximum grain size of soil in case of small testing mold diameter. 2. The compaction effect showed best in the well graded soil. In this test, compaction effect showed the best value in the soil which contained about 30~40% of particles finer than No. 200 sieves although it would vary according to the content of coarse grained soil. 3. Though the compaction method was changed at the level of compaction energy fixed, the effect of soil compaction showed little. 4. The increment of compaction energy increased the effect of soil compaction, but over a certain limit the soil compaction showed little on the effect. 5. In the method to increase the compaction energy for the purpose of the most reasonable effect, the soil compaction effect was differently shown according to the grain size distribution of the soil.