• The Journal of the Acoustical Society of Korea
• /
• v.12 no.5
• /
• pp.21-31
• /
• 1993

본 논문에서는 CAT를 적용하여 다중 처리를 지원하는 계측 시스템의 인터페이스를 설계하고 구현하였다. 다중 처리는 프로세스 기법으로 트레드 방식을 사용하였고, 스케쥴링으로는 라운드 로빈 방식을 사영하엿다. 구현된 다중처리 시스템은 HP8590A 스펙트럼 분석기와 HP473B 전력계를 시스템 운영 계측기로 이용하였다. 이밖에도 15대까지의 계측기를 첨가하여 시스템을 운용할 수있도록 하였다. 개발된 소프트웨어는 총 9개 모듈로 구성되어 있고 각 모듈들은 상호 공유되도록 구현하였다. 더 많은 예측기를 부가할 경우에는 목적 계측기에 알맞는 소프트웨어 모듈을 합하여 구성할 수 있도록 하였다. 또한 계측기를 여러대 접속할 때 발생할 수 있는 문제점에 대한 해결책을 제시하였다.문제점은 정보의 전송도중 버스가 데드록이 되거나 데이터를 손실하는 경우이다. 문제 발생의 원인은 각 계측기가 갖고 있는 정보 전송 프로토콜의 차이점이 있기 대문인데, 이를 알아내고자 프로토콜 분석기를 설계하여 컴퓨터에 접속할 수 잇도록 구현하였다. 실험한 결과 두 대의 서로 다른 계측기가 갖고 있는 공통적인 프로토콜 패턴을 찾을 수 있었다. 이 시스템을 이용할 경우 사용자는 전문지식 없이도 측정 시간과 오차를 줄일 수가 있다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.93-98
• /
• 2011

Spurred by the advent of ITS and WAVE (Wireless access in vehicular environments) as well as the wide-spread use of smart phones, WMN technology is considered to be a promising technology for extending the Internet access coverage supported by the IEEE802.11 based access points. In this paper, we propose a new MAC protocol which can efficiently utilize the multi-interface multi-channel communication capabilities supposedly equipped in most mesh routers, thereby increasing the network throughput considerably. We also verified its performance through computer simulations.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.545-552
• /
• 2010

In this paper, we study on a radio multiple sensing interface module to accurately decide serious error sources that are happened by unexpectable problems in industrial fields, in addition, we study a reliability improvement scheme to guarantee the integrity of multiple sensing data. For multiple sensing interface module, communication drivers such as USART, TWI, ADC and GPIO-I2C are implemented. to improve the transmission reliability, reed-Solomon code is used. From the simulation result of this system in indoor environment, we confirm that the reliability of RS coded data is improved about 5 times than uncoded data. Moreover, we prove that multiple sensing interface module is suitable to diagnose error sources of industrial automaton equipment.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.595-607
• /
• 2004

Networks often evolve to provide a host with multiple access points to the Internet. In this paper, we propose a transport layer load distribution mechanism utilizing the multiple network interfaces simultaneously. We specifically propose an extension of Stream Control Transmission Protoco1 (SCTP) to have load sharing over multiple network interfaces. We named the particular service provided by the Proposed load sharing mechanism to be LS (Load Sharing) mode service. LS mode service is based on the following four key elements: (i) the separation of flow control and congestion control, (ii) congestion window based striping, (iii) redundant packet retransmission for fast packet loss recovery, (iv) a novel mechanism to keep track of the receiver window size with the SACKS even if they arrive out-of-order. Through simulations, it is shown that the proposed LS mode service can aggregate the bandwidth of multiple paths almost ideally despite of the disparity in their bandwidth. When a path with a delay of 100% greater is utilized as the second path, the throughput is enhanced about 20%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.18-25
• /
• 2014

To increase wireless capacity, the concurrent use of multiple wireless interfaces on different frequency bands, called aggregation, can be considered. In this paper, we focus on aggregation of multiple Wi-Fi interfaces with packet-level traffic spreading between the interfaces. Two aggregation schemes, link bonding and multipath TCP (MPTCP), are tested and compared in a dualband Wi-Fi radio system with their Linux implementation. Various test conditions such as traffic types, network delay, locations, interface failures and configuration parameters are considered. Experimental results show that aggregation increases throughput performance significantly over the use of a single interface. Link bonding achieves lower throughput than MPTCP due to duplicate TCP acknowledgements (ACKs) resulting from packet reordering and filtering such duplicate ACKs out is considered as a possible solution. However, link bonding is fast responsive to links' status changes such as a link failure. It is shown that different combinations of interface weights for packet spread in link bonding result in different throughput performance, envisioning a spatio-temporal adaptation of the weights. We also develop a mathematical model of power consumption and compare the power efficiency of the schemes applying different power consumption profiles.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.239-247
• /
• 2013

In network based on multi-interface, there are needed channel assignment strategy that reduce interference and improve bandwidth efficiency by assigning each interface to available channels in order to utilize effectively multiple wireless interfaces on each node. MCS protocol had been proposed, which improve capacity and throughput of network by using hybrid assignment. MCS uses as the criterion to assign channel the number of node that use the same channel in contention area. but there have an problem that this information exactly does not reflect actually offered channel load. in this paper, we proposes CAMCS protocol to assign channel by that the channel busy degree to indicate the occupancy rate of channel by nodes as well as the number of nodes that use the same channel in inference area is used as criterion for estimation channel load, and conform performance improvement effect by simulation.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.191-197
• /
• 2009

One of popular applications in the Internet is the multimedia streaming services such as IPTV or You Tube in which supporting quality of service (QoS) is an important issue. One of widely adopted rate control scheme is TCP-friendly rate control (TFRC) which shows comparable performance with TCP in term of throughput and lower variation of throughput over time. On the other hand, devices with multiple interfaces are emerging in the market. However, it has not proposed to exploit multiple interfaces simultaneously for multimedia streaming services with TFRC. In this paper, we propose a multimedia streaming algorithm with TFRC which exploits multiple interfaces to guarantee the quality of service. We show that the proposed scheme shows better performance than those with a single interface in terms of throughput and communication costs.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.85-94
• /
• 2008

As a variety of wireless network services, such as WLAN, WiBro, cdma2000, and HSDPA, are provided and the range of users' choices for the wireless services are broaden, MCoA (Multiple Car-of Address) concepts that enable users to use wireless interfaces simultaneously have been presented in IETF MONAMI6 WG. Through this scheme, users can access several networks simultaneously by using multiple wireless interfaces. Such various wireless connection technologies continue to advance as they are connected and integrated to All-IP-based core network, and at the same time, heterogeneous networks are being managed overlaid according to the coverage of the wireless connection technologies. Under such circumstances, needs for an integrated architecture have arisen, and thus Wireless service framework is required that effectively manages heterogeneous networks which coexist with next generation's networks for 4G. In this paper, a wireless service framework is suggested in the consideration of current wireless service environment, and the framework covers the schemes to minimize the packet loss caused by handover, and also modified Multiple Care-of Address that helps to select most effective network by considering characteristics of various interfaces as well as users' preferences.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.287-289
• /
• 2009

무선 메쉬 네트워크(WMN, Wireless Mesh Network)에서의 전체적인 성능은 채널의 간섭을 최소화함으로써 개선될 수 있다. 본 논문은 3개의 멀티 채널을 지원하는 IEEE 802.11b/g 기반 WMNs를 위해 제안된 클러스터 기반 채널 할당 기법인 CB-CA(Cluster-Based Channel Assignment)[3] 알고리즘을 멀티 라디오 멀티 채널 WMN 환경에 적합하게 개선시키고자 한다. CB-CA 알고리즘에서는 메쉬 라우터들중에 선택된 클러스터 헤드(CH, Cluster Head) 노드들과 클러스터들 간의 에지 게이트웨이(EG, Edge Gateway) 노드들 간에는 모두 동일 채널을 사용함으로써 채널 스캐닝과 채널 스위칭을 수행하지 않는다. 그러나 이러한 모든 CH들과 EG들 간의 동일 채널의 사용은 많은 노드들에서 채널 간섭을 발생 시키는 문제점이 발생한다. 본 논문에서는 이를 해결하기 위하여 송수신 인터페이스를 구분하고 각 인터페이스에서의 채널을 랜덤하게 설정하고 이를 통신 범위 내에 인접한 이웃 클러스터들에게 알림으로써 서로 간섭이 발생하지 않는 채널들이 설정되도록 한다. 이로써 각 클러스터 간의 채널 간섭을 최소화 할 수 있음과 동시에 다중 인터페이스와 다중 채널을 모두 활용할 수 있어서 QoS를 향상시킬 수있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.297-301
• /
• 2006

다수의 네트워크에 접근이 가능한 멀티호밍 기술이 구현된 모바일 라우터는 연결된 사용자들이 요구하는 다양한 서비스 요구 사항에 맞추어 적절한 네트워크를 선택하고 서비스를 제공할 수 있어야 한다. 이를 위해서 본 논문에서는 사용자의 응용 프로그램의 요구 사항과 네트워크의 특성, 그리고 모바일 네트워크, 관리자의 정책이라는 세 가지 정보를 모바일 라우터 내에서 관리하면서, 최적의 네트워크를 선택하여 해당 네트워크와 연결을 가진 인터페이스를 통해 사용자의 트래픽을 전송할 수 있는다중 인터페이스 선택을 위한 프레임워크를 제안한다.