• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1738-1739
• /
• 2007

초음파 모터는 고정자와 회전자를 가압마찰하기 위해서 내부에 원형 판 스프링을 이용하고 있다. 출력 토크를 높이기 위해서 이러한 내부 스프링의 강도를 크게 하면 홀딩 토크 역시 커지게 된다. 이로 인하여 기동 시 많은 전류가 소모되며 일반적인 구동 파라미터에 따른 속도 특성 등 기존의 스프링 강도를 지닌 초음파모터(모델명 : 신생공업사(일) USR60-s1)의 특성과는 전혀 다른 특성을 보인다. 본 논문에서는 스프링이 강화된 새로운 타입의 초음파모터(모델명 : 신생공업사(일) USR60-s3)를 가지고 무부하 시의 속도 특성을 실험하였다. 이를 위해 FPGA를 이용해서 디지털 다중 초음파 모터 제어기를 설계하였고, 2상입력 전원의 주파수, 위상차, 주파수-위상차 다중 파라미터 등을 조절하면서 무부하 속도 특성을 측정하였다. 그 결과 홀딩토크가 강화된 초음파 모터의 경우 일반적인 기존 초음파 모터와 비교했을 때 전혀 다른 특성을 보이고, 위상차-주파수 다중 파라미터 조절방식이 조절방식임을 보인다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.348-348
• /
• 2001

• Journal of the Korea Computer Graphics Society
• /
• v.10 no.1
• /
• pp.7-13
• /
• 2004

본 논문에서는 cavity 변형 물체의 전역적 변형 형태는 유지하면서 계산 복잡도를 줄이기 위하여 모델의 다중해상도적 표현 기법 및 서로 다른 상세 레벨간 물리적 특성변수에 대한 적응기법을 제안한다. 또한, 객체의 안정적 변형을 지원하기 위한 형태유지 스프링을 제안한다. 일반적으로 위나 풍선과 같은 cavity 변형객체는 전체 구성노드의 수를 줄이기 위하여 표면 메쉬 구조로 모델링 된다. 이 경우, 표면의 인접 노드만이 감쇠(damping) 스프링으로 연결되고, 모델의 체적정보의 부재로 인하여 외부 힘이 일정시간 동안 지속적으로 주어지는 경우, 객체의 형태변형이 왜곡되고, 초기형태로의 복원이 불가능해진다. 본 논문에서 제안하는 형태유지 스프링은 외부힘에 의한 변형 후 초기형태로의 복원을 보장함으로써, 복잡한 계산과정 없이 간접적으로 객체의 볼륨유지 효과를 제공하고 변형의 불안전성을 제거한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.54-63
• /
• 2022

This paper is a study on the friction damper, which is one of the seismic reinforcement devices for structures. This study developed a damper by replacing the internal friction material with ultra high molecular weight polyethylene (UHMWPE), a type of composite material. In addition, this study applied a multi-friction method in which the internal structure where frictional force is generated is laminated in several layers. To verify the performance of the developed multi-friction damper, this study performed a characteristic analysis test for the basic physical properties, wear characteristics, and disc springs of the material. As a result of the wear test, the mass reduction rate of UHMWPE was 0.003%, which showed the best performance among the friction materials based on composite materials. Regarding the disc spring, this study secured the design basic data from the finite element analysis and experimental test results. Moreover, to confirm the quality stability of the developed multi-friction damper, this study performed an seismic load test on the damping device and the friction force change according to the torque value. The quality performance test result showed a linear frictional force change according to the torque value adjustment. As a result of the seismic load test, the allowable error of the friction damper was less than 15%, which is the standard required by the design standards, so it satisfies the requirements for seismic reinforcement devices.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.6
• /
• pp.821-826
• /
• 2013

When the values of design variables change, mode switching can often occur. If the mode of interest is not tracked, the frequencies and modes for design optimization may be miscalculated owing to modes that differ from the intended ones. Thus, mode tracking must be employed to identify the frequencies and modes of interest whenever the values of design variables change during optimization. Furthermore, reliability-based design optimization (RBDO) must be performed for design problems with design variables containing uncertainty. In this research, we perform RBDO considering the mode tracking of a compressive coil spring, i.e., a component of the joint spring that supports a compressor, with design variables containing uncertainty by using only kriging metamodels based on multiple responses approach (MRA) without existing mode tracking methods. The reliability analyses for RBDO are employed using kriging metamodel-based Monte Carlo simulation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.4
• /
• pp.67-72
• /
• 2010

In this study, performance analysis and design optimization is carried out for a multi-rate spring brake system, which is used in a cable ride to stop the arriving passengers in safe and comfortable manner. Mathematical model for the spring is developed toward the objective of minimizing the impact at the arrival while satisfying the constraint of limited distance at the stop. Matlab code is utilized to examine parameters affecting the performance of the brake system. The results are validated by a commercial software RecurDyn. Kriging meta model is used to reduce the computational cost of the analysis. Optimization is conducted by RecurDyn, from which the design parameters are determined that minimizes the impact at the stop.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1446-1454
• /
• 1990

A systematic method of design modification to reduce the influence of impact from multiple clearances in a planar four bar mechanism is developed. For this purpose, an optimization method is used with the objective function which is the linear sum of the Earles and Wu criteria for every joints with clearances. One coil spring is attached to a joint of limited range of revolution to reduce the undesirable dynamic effects due to clearances at joints. The stiffness of the coil spring and its pre-loading angle are chosen as design variables. A numerical example is taken for a four bar mechanism. The initial and modified mechanisms are compared using a clearance mechanism analysis technic to see the difference in dynamic effects due to contact loss. It is found that the modified mechanism produces much more smooth joint contact forces than the original design.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.6
• /
• pp.343-349
• /
• 2022

This paper proposes a new topology optimization scheme to determine optimized joints for multi-component models. The joints are modeled as zero-length high-stiffness spring elements. The spring joints are considered as mesh-independent springs based on a joint-element interpolation scheme. This enables the changing of the location of the joints regardless of the connected nodes during optimization. Because the joints are movable, the locations of the optimized joints should be aggregated at several points. In this paper, the novel joint dispersal (JD) constraint to prevent joint clustering is proposed. With the joint dispersal constraint, it is possible to determine the optimized joint location as well as optimized topologies while maintaining the minimum distance between each joint. The mechanical compliance value is considered as the objective function. Several topology optimization examples are solved to demonstrate the effect of the joint dispersal constraint.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.129-136
• /
• 1995

본 연구에서는 핵연료봉의 여러가지 모양형태에 대한 충격실험과 해석을 통해 비선형해석 code의 해석모델에 대한 검증을 수행하였다. 이 두 결과의 비교를 통해 개발된 모델은 다중 span을 갖는 보나 봉의 비선형충격해석에 충분히 사용될 수 있음을 확인하였다. 이러한 모델을 통한 비선형충격해석시 주의해야 할 점은 자유진동해석시의 고유진동수를 찾기 위한 경계조건을 정확히 하는 것이 중요하며, 또한 충격해석시의 정확한 충격등가스프링비를 결정하는 것이 중요하다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.3
• /
• pp.479-485
• /
• 2007

In this paper, a hierarchical simulation with an approximate implicit method is proposed in order to efficiently and plausibly animate mass-spring based cloth models. The proposed hierarchical simulation method can generate realistic motion of extremely fine mesh in interactive rate. The proposed technique employs a fast and stable simulation method which approximates the implicit integration. Although the approximate method is efficient, it is extremely inaccurate and shows excessively damped behavior. The hierarchical simulation technique proposed in this paper constructs multi-level mesh structure in order to represent the realistic appearance of cloth model and performs simulation on each level of the mesh with constraints that enforce some of the mass-points of current level to follow the movement of the previous level. This hierarchical method efficiently generates a plausible movement of a cloth model composed of large number of mass points. Moreover, this hierarchical method enables us to generate realistic wrinkles on the cloth, and the wrinkle pattern on the cloth model can be easily controlled because we can specify different contraction resistance force of springs according to their hierarchical level.