• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.689-696
• /
• 2011

In this paper, we propose the result of PSSK(Phase Silence Shift Keying) modulation scheme that is mixed PSK(Phase Shift Keying) modulation and PPM(Pulse Position Modulation) method. The performance of underwater communication systems are influenced underwater channel characteristics. In particular, delay spread can make ISI(Inter Symbol Interference) because of reverberation and multi path. It degrade the performance of the communication system. Also underwater sensor networks consider about power efficient due to the particularities of their operating environment. PSSK modulation method transmit two orthogonal symbol and using silence period in a period so it can reduce the power. Increasing the distance of between modulation symbols, to enhance the performance of BER(Bit Error Rate) as well as to improve power efficient. The result of sea trial, QPSK modulation BER is $3.19{\times}10^{-1}$ and PSSK modulation BER is $2.89{\times}10^{-1}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.213-220
• /
• 2009

Cooperative diversity is a promising technique for range extension and diversity increase without the use of multiple transmit antennas at the user equipment. In this paper, we propose a cooperative hybrid automatic repeat request relay method with adaptive retransmission to increase the throughput when the SNR of a source user is low. In the proposed method, the source user transmits the first segment of a codeword to relay users and a base station. If the base station fails to recover the information from the received packet, it requests the source or some relay users to retransmit the packet previously sent. In addition, the retransmission type of a selected user is chosen from repetition or incremental redundancy according to the quality of systematic bits in a turbo codeword. Simulation results show that the proposed method improves the throughput compared to conventional methods, and the improvement is significant when the source user has a low SNR.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.371-383
• /
• 2004

In this paper we consider technological requirements to broadcast digital television signals using single frequency networks (SFN) in the Advanced Television Systems Committee (ATSC) transmission systems and propose equalization digital on-channel repeater (EDOCR) that overcomes the limitations of conventional digital on-channel repeaters (DOCRs). Since there are no forward error correction (FEC) decoder and encoder, the EDOCR does not have an ambiguity problem. In addition, since an adaptive equalizer in the EDOCR removes multi-path signals, additive white Gaussian noise (A WGN), and feedback signal due to low antenna isolation, the EDOCR may have good output signal quality with high power.

• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.125-130
• /
• 2011

In this paper, there was compared to the performance of the Auto Correlation Feature of each code using Spreading code for improving the data transmission technology in T-DMB disaster broadcasting. Generally, wireless mobile communication environment such as DMB occur the Inter Code Interference and the Multi-Path Interference in the process of the identification of the transmitter from the receiver. To solve this problem, spreading code technology was able to improve the security property. Also, it will be able to use in many fields of signal processing, because to control a period of the code can be variable. Therefore, in this paper, we studied to compare the performance of excellent orthogonal Golay code, Kasami code and ZCD(Zero Correlation Duration) code.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.168-174
• /
• 2015

Wireless communication system for firefighters has an important role as the last communication method between the commander and the firefighters in disaster sites like fire. But the operation of Gyeongnam wireless communication system is installed, and maintained and controlled without criteria for the selection of a transmitting station and the analysis of propagation environment because of the lack of budget and the absence of professional personnel. To improve the performance of the radio station, this paper theoretically calculated free space loss of UHF 400 MHz band used by all firefighters in Gyeongnam and diffractions caused by single and multiple obstacles and computed the error after comparing the results of the actual measurement to those of simulation with FRAS operated by KFL. In the results, Deygout model was the most consistent with the actual measurement for 400MHz band in Kimhae site.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.312-315
• /
• 2019

본 연구는 아두이노 보드와 다중 센서들을 사용하여 학교 급식실 대기 공간에서의 대기 상황을 분석한다. 실험에 사용한 초음파 및 소음 감지 센서들로부터 초음파 및 소음 데이터를 입력 받아 송신하는 아두이노 보드 기반 프로그램을 작성하고, 데이터를 수집, 저장, 관리하기 위하여 CoolTerm 프로그램을 사용한다. 또한, C 언어를 기반으로 정규화 프로그램과 필터링 프로그램을 구현하여 대기 인원 감지라고 인정할 수 있는 조건(일정 소음 이상 발생, 초당 5회 이상 감지 및 3미터 미만 거리에서 감지)에 맞지 않는 데이터를 걸러낸다. 예비 실험 이후 실시한 본 실험 범위는 8월 27일(화)부터 30일(금)까지 4일간, 점심 식사 시간 중 중간 시간대인 12시 20분부터 12시 39분까지이다. 분석 결과 식단 선호도에 따라 대기 시간에 확연한 차이가 발생하는 것을 확인하였으며, 배식 시간 역시 대기 시간에 미치는 영향이 있는 것을 알 수 있었다. 또한 초음파 센서로부터 분석한 결과와 소음 감지 센서로부터 분석한 결과, 상당한 유사성이 관찰되었다. 본 연구는 대기 시간만의 측정에 그치는 것이 아니라, 식단과 대기 시간과의 관계 분석을 통해 학생 식사 행태가 대기 시간에도 영향을 미친다는 추가적인 사실을 증명하였는데, 이는 대기 시간 문제 해결이 단순히 급식 대기 상황 개선에만 있는 것이 아니라 식단 및 배식 방식 등의 개선과 같이 이루어져야 함을 보여준다. 이는 기존 연구들이 확인하지 못했던 사실로, 본 연구의 주요한 기여로 볼 수 있다. 향후 본 연구를 확대하여 무선 인터넷 및 알림 시설을 갖춘다면, 현재의 학교 급식 환경을 획기적으로 개선할 수 있을 것으로 기대한다.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.5
• /
• pp.179-186
• /
• 2008

In proportion as the growth of the wireless sensor network applications, we need for more accuracy wireless channel information. In the case of indoor or outdoor wireless sensor networks, multipath propagation causes severe problems in terms of fading. Therefore, a path-loss model for multipath environment is required to optimize communication systems. This paper deals with log-normal path loss modeling of the indoor 2.4 GHz channel. We measured variation of the received signal strength between the sender and receiver of which separation was increased from 1 to 30m. The path-loss exponent and the standard deviation of wireless channel were determined by fitting of the measured data. By using the PRR(Packet Reception Rate) of this model. Wireless sensor channel is defined CR(Connect Region), DR(Disconnected Region). In order to verify the characteristics of wireless channel, we performed simulations and experiments. We demonstrated that connection ranges are 24m in indoor, and 14m in outdoor.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.6
• /
• pp.47-58
• /
• 2002

The access control techniques, which can control unauthorized members to access to multicast service, have not been studied very often while there are a lot of on-going study on secure multicast architecture, multicast key distribution and sender authentication scheme have been studied. Multi level access control scheme in multicast can be used in a remote secure conference or to provide graduated multimedia services to each customers. In fact, multicast network has its own virtual networks according to different security levels. However, Early schemes are not effective when it protects unauthorized access in multi-access network environment. Furthermore this scheme does not provide us with hierarchical access control mechanism. This paper, therefore, proposes hierarchical access control scheme to provide the effectiveness in network layer by security level comparison. And we also suggests hierarchical key distribution scheme for multi level access control in application layer and effective hierarchical key renewal scheme in dynamic multicast environment which is easy to join and leaving the multicast group.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.194-198
• /
• 2021

LoRa is a physical layer technology that is designed to provide a reliable long-range communication with introducing CSS and with introducing a loco parentis tree network. Since a leaf can utilize multiple parents at the same time with a single transmission, PDR increases logarithmically as the number of gateways increases. Because of the ALOHA-like MAC of LoRa, however, the PDR degrades even under the loco parentis tree topology similarly to the single-gateway environment. Our proposed method is aimed to achieve SDMA approach to reuse the same frequency in different areas. For that purpose, it elaborately controls each TxPower of the senders for each message in concurrent transmission to survive the collision at each different gateway. The gain from this so-called capture effect increases the capacity of resource-hungry LPWAN. Compared to a typical collision-free controlled-access scheme, our method outperforms by 10-35% from the perspective of the total count of the consumed time slots. Also, due to the power control mechanism in our method, the energy consumption reduced by 20-40%.