• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.10
• /
• pp.2247-2256
• /
• 2011

In this paper, we propose a coordinator-based reader protocol that can avoid reader collisions in a passive RFID system. In a proposed protocol, unlike conventional protocols that a reader itself selects its own slot randomly to communicate with tags such as DCS, Colorwave, a coordinator reader allocates an unused slot to a reader to participate in the network and sends a current slot number. A reader allocated a slot can communicate with tags. The proposed protocol can adaptively modified to apply for multiple coordinator readers environment in a wide area. This causes reader collision problem, but can be alleviated partly by applying the frequency planning. In this way, we verifies that a RFID system using the proposed protocol is three to five times better than existing systems through the simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4133-4137
• /
• 2011

Reliable Multi-Reader RFID identification is one of issues in Multi-Reader RFID realization program in recent. And the Multi-Reader RFID reader has difficulty to obtain reliable data in data capture layer. The reason is that unreliable readings such as a false positive reading and a false negative reading and missed readings can happen by reader collision problems, noise, or the mobility of tagged objects. We introduce performance metrics to solve these reader problems. We propose three solutions the Minimum Overlapped Read Zone (MORZ) with Received Signal Strength Indicator (RSSI), the Spatial-Temporal Division Access (STDA) method, and double bigger size of tags attached on the object. To show the improvement of the proposed methods, we calculate tag's successful read rates in a smart office, which consists of Multi-Reader RFID systems.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.67-74
• /
• 2016

This paper presents a novel multiple orthogonal subcarrier modulation based UHF band RFID communication system. In tag-to-reader communication, the demonstration system can deliver 1.6 Mbps through four subcarriers. To improve data rate while suppressing increase in circuit complexity, tag employs square-waves as the subcarriers and uses individual load modulators for each subcarrier. By using multiple orthogonal subcarrier based modulation, proposed communication system can be operated under existing UHF band RFID regulation. In reader, an OFDM demodulator is used. Since the tag backscatters the reader's CW carrier, carrier frequency offset compensation is not necessary in reader demodulator. Experimental results show that the demonstration system achieves a bit error rate of 10-5 at an Eb/N0 of 10.8 dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.102-107
• /
• 2021

This paper discusses the containment control problem for multi-agent systems with input saturations. The goal of the containment control is to obtain swarming behavior by driving follower agents into the convex hull which is spanned by multiple leader agents. This paper considers multiple leader agents moving at the same constant speed. Then, to solve the containment problem for moving leaders, we propose a PI-based distributed control algorithm. We next analyze the convergence of follower agents to the desired positions. Specifically, we apply the integral-type Lyapunov function to take into account the saturation nonlinearity. Then, based on Lasalle's Invariance Principle, we show that the asymptotic convergence of error states to zero for any positive constant gains. Finally, numerical examples with the static and moving leaders are provided to validate the theoretical results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.33-41
• /
• 2008

As RFID technology is developing and increasingly being used in many applications, the implementation is changing from single reader to multiple readers even dense readers. Since the number of readers is increasing, there are more collisions between readers and much interference between readers and tags. Therefore, to avoid interference or collision, many algorithms have being proposed, such as Gen2 dense mode, LBT(listen before talk), TDMA based method. In this paper, we propose a null frame algorithm, which calculates the collision probability in frame slotted aloha scheme and use this information to avoid the possible collisions. Comparing with conventional scheme, our proposed algorithm has some advantages in terms of reader collision number and required frame numbers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.602-611
• /
• 2007

In this paper, the forward link of UHF RFID system is modeled in accordance with the EPCglobal class 1 generation 2(EPCglobal C1G2) UHF Radio-Frequency Identity protocol specification at $860{\sim}960MHz$. Based on the constructed model, characteristics on the forward link signal for the EPCglobal C1G2 RFID reader are simulated with the help of a MATLAB softwarein order to extract the design parameters of a transmit digital filter which meets the Korean RFID regulations. Herein, the forward link model is consisted of PIE source coding, transmit digital filter, modulation, local oscillator, and antenna. From the simulation results, the ranges of three design parameters(roll-off factor, cutoff frequency, the number of tabs) for transmit digital filter are obtained with different modulation techniques and the Tari(type a reference interval) values. Finally, DSB/SSB-ASK modulation technique can not satisfy the EPCglobal C1G2 specification when Tari equals to $6.25{\mu}sec$ in a multiple-reader environment. Consequently this paper can provide a guideline for design parameters of a RFID reader as well as the basic scheme of analyzing frequency interference problems in RFID environments, including multiple-reader and dense-reader environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.1-8
• /
• 2006

In this paper, we suggested a new antenna structure for the RFID(Radio Frequency IDentification) reader. The conventional RFID reader uses a loop antenna. The central area of a loop antenna shows a low magnetic field strength, especially for the case of a large loop antenna diameter. We proposed a parallel-fed multiple loop antenna. Simulation and measurement were carried out for a single loop antenna, series-fed and parallel-fed multiple loop antennas. Simulation results show that we can obtain 0.40A/m, 0.68A/m, 1.98A/m of magnetic field strengths at the central point of a reader antenna for a single loop antenna, series-fed and parallel-fed multiple loop antennas, respectively. We measured the $79mm{\time}48mm$ tag area averaged induced voltages with applying 20Vp-p same source signals to reader antennas through the resistors. Measured tag area averaged induced voltages at the central point of a reader antennas were 0.76V, 1.45V, 4.04V for a single loop antenna series-fed and parallel-fed multiple loop antennas, respectively. The results show that we can get high induced voltage which can grantee a longer reading distance with a proposed parallel-fed multiple loop antenna.

• Journal of KIISE:Information Networking
• /
• v.34 no.5
• /
• pp.316-327
• /
• 2007

RFID (Radio Frequency Identification) is one of the most promising air interface technologies in the future for object identification using radio wave. If there are multiple tags within the range of the RFID tag reader, all tags send their tag identifications to the reader at the same time in response to the reader's query. This causes collisions on the reader and no tag is identified. A multi-tag identification problem is a core issue in the RFID. It can be solved by anti-collision algorithm such as slot based ALHOA algorithms and tree based algorithms. This paper, proposes a collision tree based anti-collision algorithm using collision tree in RFID system. It is a memory-less algorithm and is an efficient RFID anti-collision mechanism. The collision tree is a mechanism that can solve multi-tag identification problem. It is created in the process of querying and responding between the reader and tags. If the reader broadcasts K bits of prefix to multiple tags, all tags with the identifications matching the prefix transmit the reader the identifications consisted of k+1 bit to last. According to the simulation result, a proposed collision tree based anti-collision algorithm shows a better performance compared to tree working algorithm and query tree algorithm.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.9-18
• /
• 2022

Organizational performance is directly associated with leaders' behavior and the importance of various leadership types are continuously emphasized. Various of leadership types are possessed of different roles and influences. Nowadays, Chinese organizations continue to reinforce social responsibility and demand ethical elements for continuous development of organization and performance improvement. It shows that the importance of ethical leadership is emphasized among Chinese organizations. Based on this phenomenon, this research focused on identifying the role of ethical leadership and verifying the level of performance. According to the current situation that requires innovation in relation to performance, we focused on the employees' innovative behavior. Furthermore, we also verified serial multiple mediating effects of trust in leader and voice behavior on the relationship between ethical leadership and innovative behavior. This research focused on 336 employees in Chinese small and medium-sized enterprises to conducted a survey and the data were used in empirical analysis. The results showed ethical leadership had a positive influence on innovative behavior. In additon, the serial multiple mediating effects of trust in leader and voice behavior were verified. Overall, this research focused on exploring performance that can be achieved through ethical leadership and finding the ways to improve performance. Finally, the future research related to ethical leadership and performance was presented.

• Journal of Korea Multimedia Society
• /
• v.9 no.3
• /
• pp.307-314
• /
• 2006

This paper proposes a QT_rev algorithm for identifying multiple tags. The proposed QT_rev algorithm is based on the query tree algorithm. In the algorithm, the tag will send all the bits of their identification codes when the query string matches the first bits of their identification codes. On the other hand, in the QT_rev algorithm, the tag will send the remaining bits of their identification codes. After the leader receives all the responses of the tags, it knows which bit is collided. Therefore, if the collision occurs in the last bit, the reader can identify two tags simultaneously without further query. According to the simulation results, the QT_rev algorithm outperforms the QT algorithm in terms of the number of queries and the number of response bits.